A new approach for facility siting using mapping risks on a plant grid area and optimization

The present work is focused on developing a methodology to find the optimal placement of a hazardous process unit and other facilities using optimization theory while considering a risk map in the plant area. Incidents can have possible consequences resulting from flammable gas releases, which can be evaluated by using consequence modeling programs. The probability of each incident can be derived from initial leak hole size estimation through event tree analysis. In this methodology the plant area was divided into square grids and risk scores were estimated for each grid. The overall cost is a function of the probable cost of property damage due to fires or explosions and the interconnection cost including piping, cable, and management. The proposed approach uses a mixed integer linear optimization programming (MILP) that identifies attractive locations by minimizing the overall cost. A case study is presented for a hexane–heptane separation facility that considers the meteorological data for the given area in order to show the applicability of the proposed methodology. Results from this study will be useful in assisting the selection of locations for facilities and for risk management.     

An approach for risk reduction (methodology) based on optimizing the facility layout and siting in toxic gas release scenarios

In this work, a new approach to optimize facility layout for toxic release is presented. By integrating a risk analysis in the optimization formulation, we propose a safer assignment for facility layout and siting. Accompanying with the economical concepts used in a plant layout, the new model considers the cost of willing to avoid a fatality, i.e. the potential injury cost due to accidents associated with toxic release near residential areas. The proposed formulation incorporates a real meteorological data to calculate the injury risk through the probit model and Monte Carlo simulation using dense gas dispersion modeling (DEGADIS). The overall problem was initially modeled as a disjunctive program where the coordinates of each facility and cost-related variables are the main unknowns. Then, the convex hull approach was used to reformulate the problem as a Mixed Integer Non-Linear Program (MINLP) that identifies potential layouts by minimizing overall costs. This approach gives the coordinates of each facility, and estimates for the total length of pipes, the land area, and the selection of safety devices. Finally, the 3D-computational fluid dynamics (CFD) was used to compare between the initial layout and the final layout. Moreover, analyses of separation distances fr2om hazard facilities and hindrance effects will be discussed based on the approach used in this work.     

Desorption characteristics of kaolin clay contaminated with zinc from electrokinetic soil processing

A number of bench scale laboratory column tests were carried out using a newly designed and developed electrokinetic cell to investigate the fundamental behavior of zinc-spiked kaolin clay subjected to an electric field. Laboratory investigations focused on (i) zinc migration by the combined effects of electromigration and electro-osmosis and (ii) the electrically induced desorption characteristics of zinc-contaminated kaolin that occurred during processing. The correlations of the applied voltage gradient, electro-osmotic flow rate, and the development of a pH gradient were examined and evaluated. The results showed that the removal efficiency was high during the early stage of processing due to rapid desorption by electrokinetic effects in the cathode region. However, the majority of zinc migrating from the anode was precipitated due to the high pH environment in the cathode region.     

Evaluating Flow Metric‐Based Stream Classification Systems to Support the Determination of Ecological Flows in North Carolina

Hydroecological classification systems are typically based on an assemblage of streamflow metrics and seek to divide streams into ecologically relevant classes. Assignment of streams to classes is suggested as an initial step in the process of establishing ecological flow standards. We used two distinct hydroecological river classification systems available within North Carolina to evaluate the ability of a hydrologic model to assign the same classes as those determined by observed streamflows and to assess the transferability of such systems to ungaged streams. Class assignments were examined by rate of overall matches, rate of class matches, spatial variability in matches, and time period used in class assignment. The findings of this study indicate assignments of stream class: (1) are inconsistent among different classification systems; (2) differ between observed and modeled data; and (3) are sensitive to the period of record within observed data. One clear source of inconsistency/sensitivity in class assignments lies with the use of threshold values for metrics that distinguish stream classes, such that even small changes in metric values can result in different class assignments. Because these two hydroecological classification systems are representative of other classification systems that rely on quantitative decision thresholds, it can be surmised that the use of such systems based on stream flow metrics is not a reliable approach for guiding ecological flow determinations.     

Soil profile distribution of phosphorus and other nutrients following wetland conversion to beef cattle pasture

Largely influenced by the passage of the Swamp Land Act of 1849, many wetlands were lost in the coastal plain region of the southeastern United States, primarily as a result of drainage for agricultural activities. To better understand the chemical response of soils during wetland conversion, soil core samples were collected from the converted beef cattle pastures and from the natural wetland at Plant City, FL in the summers of 2002 and 2003. Data collected from the natural wetland sites were used as reference data to detect potential changes in soil properties associated with the conversion of wetlands to improved beef cattle (Bos taurus) pastures from 1940 to 2003. The average concentration of total phosphorus (TP) in pasture soils (284 mg kg(-1)) was significantly (p 相似文献   

Sequential treatment of olive oil mill wastewater with adsorption and biological and photo-Fenton oxidation

Olive oil mill wastewater (OMWW), a recalcitrant pollutant, has features including high phenolic content and dark color; thereby, several chemical or physical treatments or biological processes were not able to remediate it. In this study, the treatment efficiencies of three treatments, including adsorption, biological application, and photo-Fenton oxidation were sequentially evaluated for OMWW. Adsorption, biological treatment, and photo-Fenton caused decreasing phenolic contents of 48.69 %, 59.40 %, and 95 %, respectively. However, after three sequential treatments were performed, higher reduction percentages in phenolic (total 99 %) and organic contents (90 %) were observed. Although the studied fungus has not induced significant color reduction, photo-Fenton oxidation was considered to be an attractive solution, especially for color reduction. Besides, toxicity of OMWW treatment was significantly reduced.     

Classification of chemicals according to mechanism of aquatic toxicity: an evaluation of the implementation of the Verhaar scheme in Toxtree

A number of mechanisms have been identified that can lead to (acute) aquatic toxicity. The assignment of compounds to a particular mechanism of action is important in the development and utilisation of (quantitative) structure-activity relationships ((Q)SARs) for ecotoxicity. Assignment to a mechanism can be difficult; however in 1992 Verhaar et al. published a series of structural rules which aimed to classify compounds according to mechanism of action. Recent interest has seen the Verhaar rules coded into freely available software such as Toxtree available from the European Chemicals Bureau. To date, a complete critical evaluation of these rules has been lacking. Therefore, the aim of this study was to evaluate the Toxtree implementation of the Verhaar rules using two well characterised aquatic toxicity datasets (Pimephales promelas and Tetrahymena pyriformis phenol databases) for which mechanisms of toxic action are well established. The present study highlights rule, and possible coding, errors that may lead to misclassifications. Improvements to both the rules and prediction architecture are suggested. In particular further rules to improve predictions for polar narcosis (class 2) are suggested.     

Safety assessment of potential supercritical solvents for Fischer–Tropsch Synthesis

Fischer–Tropsch Synthesis (FTS) is a primary pathway for gas-to-liquid (GTL) technology. In order to overcome commercial problems associated with reaction and transport phenomena, the use of supercritical solvents has been proposed to enhance conversion, catalyst stability and improve temperature control in fixed-bed reactors. One of the major challenges in designing the supercritical FTS reactor unit is selecting appropriate solvents of critical properties within the required reaction operating conditions. Numerous alternatives exist and should be screened based on relevant criteria. The main aim of this paper is to develop a screening methodology to identify an optimum supercritical solvent or a mixture of solvents that meet the aforementioned criteria while minimizing the cost and more importantly satisfying the safety constraints. A safety metric system was developed in order to compare the risk issues associated with using different solvents. In addition, an economic analysis of using the different solvents was performed. Finally, a case study was solved to illustrate the use of the proposed metrics and the selection of solvents based on safety and techno-economic criteria.     

The distribution of triclosan and methyl-triclosan in marine sediments of Barker Inlet, South Australia

In this work, we investigated the transport and burial of triclosan and its methylated derivative, in surface sediments near the mouth of Barker Inlet in South Australia. The most likely source of this commonly used bactericide to the area is a wastewater outfall discharging at the confluence of the inlet with marine waters. Triclosan was detected in all samples, at concentrations (5-27 μg kg(-1)) comparable to values found in other surface sediments under the influence of marine wastewater outfalls. Its dispersal was closely associated with fine and organic-rich fractions of the sediments. Methyl-triclosan was detected in approximately half of the samples at concentrations <11 μg kg(-1). The occurrence of this compound was linked to both wastewater discharges and biological methylation of the parent compound. Wastewater-borne methyl-triclosan had a smaller spatial footprint than triclosan and was mostly deposited in close proximity to the outfall. In situ methylation of triclosan likely occurs at deeper depositional sites, whereas the absence of methyl-triclosan from shallower sediments was potentially explained by photodegradation of the parent compound. Based on partition equilibrium, a concentration of triclosan in the order of 1 μg L(-1) was estimated in sediment porewaters, a value lower than the threshold reported for harmful effects to occur in the couple of species of marine phytoplankton investigated to date. Methyl-triclosan presents a greater potential for bioaccumulation than triclosan, but the implications of its occurrence to aquatic ecosystem health are difficult to predict given the lack of ecotoxicological data in the current literature.