Sorption-enhanced chemical looping oxidative steam reforming of methanol for on-board hydrogen supply

Hydrogen is an indispensable energy carrier for the sustainable development of human society. Nevertheless, its storage, transportation, and in situ generation still face significant challenges. Methanol can be used as an intermediate carrier for hydrogen supplies, providing hydrogen energy through instant methanol conversion. In this study, a sorption-enhanced, chemical-looping, oxidative steam methanol-reforming (SECL-OSRM) process is proposed using CuO–MgO for the on-board hydrogen supply, which could be a promising method for safe and efficient hydrogen production. Aspen Plus software was used for feasibility verification and parameter optimization of the SECL-OSRM process. The effects of CuO/CH3OH, MgO/CH3OH, and H2O/CH3OH mole ratios and of temperature on H2 production rate, H utilization efficiency, CH3OH conversion, CO concentration, and system heat balance are discussed thoroughly. The results indicate that the system can be operated in auto-thermal conditions with high-purity hydrogen (99.50 vol％) and ultra-low-concentration CO (<50 ppm) generation, which confirms the pos-sibility of integrating low-temperature proton-exchange membrane fuel cells (LT-PEFMCs) with the SECL-OSRM process. The simulation results indicate that the CO can be modulated in a lower concentration by reducing the temperature and by improving the H2O/CH3OH and MgO/CH3OH mole ratios.     

Rapid Assessment of Hydrologic Performance of Low Impact Development Practices under Design Storms

Low impact development (LID) practices are often applied to compensate for surface imperviousness caused by urban development. These practices can mitigate flood risk by reducing runoff volume and peak flow and by delaying the time to peak flow. To select a suitable LID practice type and its surface area during the preliminary design process, it is necessary to rapidly estimate the hydrologic performance of various LID designs under design storms. This study provides a method and a toolbox for rapid assessment of the hydrologic performance of various LID practices, which can be useful to developers for establishment of preliminary LID designs. The hydrologic performance of three common types of LID practices (i.e., green roofs, bioretention cells, and infiltration trenches) under various design storms is first simulated using the Storm Water Management Model (SWMM). The results are then presented as performance curves on a unit storage basis. Look‐up tables are further developed to assist the comparison and selection of the LID alternatives for various hydrologic performance targets. To facilitate SWMM modeling, a MATLAB toolbox is developed to automate the process of input modification, model simulation, result extraction, and postprocessing. Finally, the sensitivity of the look‐up curves to design storm types and design specifications of bioretention cells is also analyzed, and the assumptions used in the development of these look‐up curves are validated.     

Ocean acidification induces budding in larval sea urchins

Ocean acidification (OA), the reduction of ocean pH due to hydration of atmospheric CO₂, is known to affect growth and survival of marine invertebrate larvae. Survival and transport of vulnerable planktonic larval stages play important roles in determining population dynamics and community structures in coastal ecosystems. Here, we show that larvae of the purple urchin, Strongylocentrotus purpuratus, underwent high-frequency budding (release of blastula-like particles) when exposed to elevated pCO₂ level (>700 μatm). Budding was observed in >50 % of the population and was synchronized over short periods of time (~24 h), suggesting this phenomenon may be previously overlooked. Although budding can be a mechanism through which larval echinoids asexually reproduce, here, the released buds did not develop into viable clones. OA-induced budding and the associated reduction in larval size suggest new hypotheses regarding physiological and ecological tradeoffs between short-term benefits (e.g. metabolic savings and predation escape) and long-term costs (e.g. tissue loss and delayed development) in the face of climate change.     

Influence of varying nutrient and pesticide mixtures on abatement efficiency using a vegetated free water surface constructed wetland mesocosm

The nutrient and pesticide abatement efficiency of varying mixtures was examined in a vegetated free water surface constructed wetland. Three different agricultural chemical pollutant mixture conditions were assessed: nutrients only (N and P); pesticides only (atrazine, S-metolachlor and permethrin); and a mixture of nutrients and pesticides. With nutrients only, 672 h nutrient mitigation of 77–91% total phosphorous (TP) and 74–98% total nitrogen (TN) was associated with distance from the injection point and rainfall, whereas with nutrient and pesticide mixtures, 672 h nutrient mitigation of 11–71% TP and 84–98% TN were associated with distance and time. With pesticides only, 672 h pesticide mitigation of 50–99% was associated with distance and time, whereas with nutrients and pesticide mixtures, 672 h pesticide mitigation of 48–99% was associated primarily with distance. Dissipation half-lives were 2–10 times greater for P and 1.5–5 times greater for N when pesticides were present. Pesticide dissipation half-lives showed no clear differences with or without nutrients. While vegetated free water surface constructed wetlands can be effective best management practice tools to trap and abate agricultural run-off during rainfall events, efficiencies can be affected by different types of complex pollutant mixtures and wetland design and implementation should accommodate varying efficiencies.     

Toxicity assessment of copper by electrochemically active bacteria in wastewater

Environmental Geochemistry and Health - A bioelectrochemical sensor (BES) was constructed for toxicity assessment of copper in contaminated domestic sewage. Electrochemically active bacteria (EAB),...     

Using expert knowledge to support Endangered Species Act decision-making for data-deficient species

Many questions relevant to conservation decision-making are characterized by extreme uncertainty due to lack of empirical data and complexity of the underlying ecologic processes, leading to a rapid increase in the use of structured protocols to elicit expert knowledge. Published ecologic applications often employ a modified Delphi method, where experts provide judgments anonymously and mathematical aggregation techniques are used to combine judgments. The Sheffield elicitation framework (SHELF) differs in its behavioral approach to synthesizing individual judgments into a fully specified probability distribution for an unknown quantity. We used the SHELF protocol remotely to assess extinction risk of three subterranean aquatic species that are being considered for listing under the U.S. Endangered Species Act. We provided experts an empirical threat assessment for each known locality over a video conference and recorded judgments on the probability of population persistence over four generations with online submission forms and R-shiny apps available through the SHELF package. Despite large uncertainty for all populations, there were key differences between species’ risk of extirpation based on spatial variation in dominant threats, local land use and management practices, and species’ microhabitat. The resulting probability distributions provided decision makers with a full picture of uncertainty that was consistent with the probabilistic nature of risk assessments. Discussion among experts during SHELF's behavioral aggregation stage clearly documented dominant threats (e.g., development, timber harvest, animal agriculture, and cave visitation) and their interactions with local cave geology and species’ habitat. Our virtual implementation of the SHELF protocol demonstrated the flexibility of the approach for conservation applications operating on budgets and time lines that can limit in-person meetings of geographically dispersed experts.     

Influence of corn steep liquor and glucose on colonization of control and CCB (Cu/Cr/B)-treated wood by brown rot fungi

There are increasing problems with regard to the disposal of treated wood waste. Due to heavy metals or arsenic in impregnated wood waste, burning and landfill disposal options are not considered to be environmentally friendly solutions for dealing with this problem. Extraction of the heavy metals and recycling of the preservatives from the wood waste is a much more promising and environmentally friendly solution. In order to study the scale up of this process, copper/chromium/boron-treated wood specimens were exposed to copper tolerant (Antrodia vaillantii and Leucogyrophana pinastri) and copper sensitive wood decay fungi (Gloeophyllum trabeum and Poria monticola). Afterwards, the ability of fungal hyphae to penetrate and overgrow the wood specimens was investigated. The fungal growths were stimulated by immersing the specimens into aqueous solution of glucose or corn steep liquor prior to exposure to the fungi. The fastest colonization of the impregnated wood was by the copper tolerant A. vaillantii. Addition of glucose onto the surface of the wood specimens increased the fungi colonization of the specimens; however, immersion of the specimens into the solution of corn steep liquor did not have the same positive influence. These results are important in elucidating copper toxicity in wood decay fungi and for using these fungi for bioremediation of treated wood wastes.     

Regional engagement and spatial modelling for natural resource management planning

Changing unsustainable natural resource use in agricultural landscapes is a complex social–ecological challenge that cannot be addressed through traditional reductionist science. More holistic and inclusive (or transdisciplinary) processes are needed. This paper describes a transdisciplinary project for natural resource management planning in two regions (Eyre Peninsula and South Australian Murray-Darling Basin) of southern Australia. With regional staff, we reviewed previous planning to gain an understanding of the processes used and to identify possible improvement in plan development and its operation. We then used an envisioning process to develop a value-rich narrative of regional aspirations to assist stakeholder engagement and inform the development of a land use management option assessment tool called the landscape futures analysis tool (LFAT). Finally, we undertook an assessment of the effectiveness of the process through semi-structured stakeholder interviews. The planning process review highlighted the opinion that the regional plans were not well informed by available science, that they lacked flexibility, and were only intermittently used after publication. The envisioning process identified shared values—generally described as a trust, language that is easily understood, wise use of resources, collaboration and inclusiveness. LFAT was designed to bring the best available science together in a form that would have use in planning, during community consultation and in assessing regional management operations. The LFAT provided spatially detailed but simple models of agricultural yields and incomes, plant biodiversity, weed distribution, and carbon sequestration associated with future combinations of climate, commodity and carbon prices, and costs of production. Stakeholders were impressed by the presentation and demonstration results of the software. While there was anecdotal evidence that the project provided learning opportunities and increased understanding of potential land use change associated with management options under global change, the direct evidence of influence in the updated regional plan was limited. This project had elements required for success in transdisciplinary research, but penetration seems limited. Contributing factors appear to be a complexity of climate effects with economic uncertainty, lack of having the project embedded in the plan revision process, limited continuity and capacity of end users and limited after project support and promotion. Strategies are required to minimise the controlling influence that these limitations can have.