Assessment of five bioaccessibility assays for predicting the efficacy of petroleum hydrocarbon biodegradation in aged contaminated soils

In this study, the bioaccessibility of petroleum hydrocarbons in aged contaminated soils (1.6-67gkg(-1)) was assessed using four non-exhaustive extraction techniques (100% 1-butanol, 100% 1-propanol, 50% 1-propanol in water and hydroxypropyl-β-cyclodextrin) and the persulfate oxidation method. Using linear regression analysis, residual hydrocarbon concentrations following bioaccessibility assessment were compared to residual hydrocarbon concentrations following biodegradation in laboratory-scale microcosms in order to determine whether bioaccessibility assays can predict the endpoint of hydrocarbon biodegradation. The relationship between residual hydrocarbon concentrations following microcosm biodegradation and bioaccessibility assessment was linear (r(2)=0.71-0.97) indicating that bioaccessibility assays have the potential to predict the extent of hydrocarbon biodegradation. However, the slope of best fit varied depending on the hydrocarbon fractional range assessed. For the C(10)-C(14) hydrocarbon fraction, the slope of best fit ranged from 0.12 to 0.27 indicating that the non-exhaustive or persulfate oxidation methods removed 3.5-8 times more hydrocarbons than biodegradation. Conversely, for the higher molecular weight hydrocarbon fractions (C(29)-C(36) and C(37)-C(40)), biodegradation removed up to 3.3 times more hydrocarbons compared to bioaccessibility assays with the resulting slope of best fit ranging from 1.0-1.9 to 2.0-3.3 respectively. For mid-range hydrocarbons (C(15)-C(28)), a slope of approximately one was obtained indicating that C(15)-C(28) hydrocarbon removal by these bioaccessibility assays may approximate the extent of biodegradation. While this study demonstrates the potential of predicting biodegradation endpoints using bioaccessibility assays, limitations of the study include a small data set and that all soils were collected from a single site, presumably resulting from a single contamination source. Further evaluation and validation is required using soils from a range of hydrocarbon contamination sources in order to develop robust assays for predicting bioremediation endpoints in the field.     

Characterizing changes in surface ozone levels in metropolitan and rural areas in the United States for 1980–2008 and 1994–2008

In this analysis, we characterize urban and rural ozone (O₃) trends across the US for the periods 1980–2008 (29 years) and 1994–2008 (15 years) using three exposure metrics, which summarize daily O₃ concentrations to reflect different ways O₃ may affect human health and vegetation. We observe that a statistically significant trend at a specific monitoring site, using one exposure metric, does not necessarily result in a similar trend using the other two metrics. The two most common trends among the monitoring sites are either a continuation of negative trending over the 29-year period or a shift from negative to no trend status, indicating a leveling off of the trending. Very few sites exhibit statistically significant increases in the exposure indices. In characterizing the statistically significant changes in the distribution of hourly average O₃, we observe subtle statistically significant changes in the lower part of the distribution (i.e., below 50 ppb) that are not necessarily captured by the trending patterns associated with the three exposure metrics. Using multisite data from 12 metropolitan cities, we find that as the frequency of higher hourly average concentrations is reduced, the lower hourly average concentrations also move upward toward the mid-level values. The change in the number of the hourly average concentrations in the lower range is consistent with decreased NO scavenging. We recommend assessing possible subtle shifts in O₃ concentrations by characterizing changes in the distribution of hourly average concentrations by month. Identifying statistically significant monthly changes in the mid- and low-level hourly average concentrations may provide important information for assessing changes in physical processes associated with global climate change, long-range transport, and the efficacy of models used for emission and risk reductions. Our results indicate that it is important to investigate the change in the trending pattern with time (e.g., moving 15-year trending) in order to assess how year-to-year variability may influence the trend calculation.     

Soil-mediated prion transmission: is local soil-type a key determinant of prion disease incidence?

Prion diseases, including chronic wasting disease (CWD) and scrapie, can be transmitted via indirect environmental routes. Animals habitually ingest soil, and results from laboratory experiments demonstrate prions can bind to a wide range of soils and soil minerals, retain the ability to replicate, and remain infectious, indicating soil could serve as a reservoir for natural prion transmission and a potential prion exposure route for humans. Preliminary epidemiological modeling suggests soil texture may influence the incidence of prion disease. These results are supported by experimental work demonstrating variance in prion interactions with soil, including variance in prion soil adsorption and soil-bound prion replication with respect to soil type. Thus, local soil type may be a key determinant of prion incidence. Further experimental and epidemiological work is required to fully elucidate the dynamics of soil-mediated prion transmission, an effort that should lead to effective disease management and mitigation strategies.     

Quantification and characterization of vehicle-based polycyclic aromatic hydrocarbons (PAHs) in street dust from the Tamale metropolis,Ghana

Objective

Concentrations of polycyclic aromatic hydrocarbons (PAHs) in street dust in the Tamale metropolis, Ghana, have been measured in this study.

Results

The concentrations of the various types of PAHs identified in street dust samples from high vehicular traffic density in the metropolis are as follows: naphthalene, 10,000 μg/kg; acenaphthylene, 13,000 μg/kg; acenaphthene, 76,000 μg/kg; fluorene, 18,900 μg/kg; phenanthrene, 40,000 μg/kg; anthracene, 21,000 μg/kg; fluoranthene, 35,200 μg/kg; pyrene, 119,000 μg/kg; benzo[a]anthracene, 17,700 μg/kg; chrysene, 10,600 μg/kg; benzo[k]fluoranthene, 18,700 μg/kg; benzo[a]pyrene, 10,900 μg/kg and benzo[g, h, i]perylene, 21,000 μg/kg. Calculation of the phenanthrene/anthracene ratio indicated that the PAHs identified in this study were from vehicular fallout as the ratio was less than 10.

Conclusion

It is clear from the results of the study that road users in the Tamale metropolis, especially hawkers, are exposed to the harmful effects of PAHs, and this suggests the need for the establishment of mitigation measures by the regulatory agencies.

     

Investigation of reagent distributions on glass fiber membrane filters used in air sampling

This project has arisen from the need to produce GFFs (glass fiber filters) bearing a thin and evenly distributed coating of a selected reagent in the equatorial plane for breakthrough studies. However, it has been discovered that today's two general techniques for coating GFFs (total immersion and application of reagent solution to GFFs) have usually produced unevenly distributed coatings of reagent in the equatorial plane. In addition, quantities of reagent on GFFs from commercial sources may vary widely in the same lot of coated GFFs. Consequences are variability in capacity of coated filters at the point of breakthrough and, perhaps, wasted reagent. Although today's reagent-coated filters may be satisfactory for routine air sampling, such filters may be unacceptable for precise breakthrough studies. Research has been conducted successfully to produce nearly evenly distributed coatings of reagents in the equatorial plane of GFFs by application of reagent solutions to the centers of GFFs which are resting on crisscrossing, fine, stainless-steel wire. Distributions of coatings have been determined by punching out twenty-one 5-mm circles from each GFF and analyzing each circle by flow-injection with a UV detector. Lowest achievable relative standard deviations of measurement (RSDs) for reagents in 5-mm circles have been 5 to 7%. Reagents studied have included 1-(2-pyridyl)piperazine (1-2PP), 2,4-dinitrophenylhydrazine (DNPH), and 1-(9-anthracenylmethyl)piperazine (MAP). Factors affecting the distribution of such coatings include choice of reagent and choice of solvent for the reagent solution.     

An approach for restoration of the water quality with emphasis on the removal of organochlorine pesticides and eutrophic conditions in tropical rivers

This work deals with an approach for the water quality restoration with emphasis on the removal of organochlorine pesticides and eutrophic conditions in tropical rivers, causing influence on the management of the central-regional aqueduct, as a source of water supply for human consumption (4 million people) and industrial production in the states of Carabobo, Cojedes and Aragua, Venezuela, testing the phytoremediation techniques through Vetiveria zizanioides (VZ) species and coupled bioreactors, Sequencing Batch Reactor (SBR) followed by an Upflow Anaerobic Filter in Three Separate Stages (UAF-3SS). Five rivers are involved known as Chirgua, Paito Guacara, Ereigüe, and Tucutunemo, whose waters have been classified as hypereutrophic, and containing organochlorine pesticides (OCPs). As a sample, for Tucutunemo River, OCPs included to DDT (dichlorodiphenyltrichloroethane) and its isomers and DRINs (Aldrin, Endrin and Dieldrin) dissolved in water and sorbed on sediments, which were measured during the dry and rainy seasons in the period 2013 to 2016, in three monitoring stations distributed in a reach of 15 km. The results indicated that p.p′-DDT concentration dissolved in water was increased up to 10 times from rainy to dry seasons, indicating that a permanent use of it is being carried out by farmers in the agricultural activity development. Steady concentrations of the DTT isomers (e.g., p.p′-DDD and p.p′-DDE) and Aldrin isomers (e.g., Dieldrin) demonstrated that the anaerobic and aerobic biodegradation processes occurred along the river and between climatic seasons. At experimental scale, VZ hydroponic system developed over a period of 6 months for the removal of nutrients demonstrated moderately low to high removal efficiencies. With respect coupled bioreactors, each bioreactor has been experimentally tested, demonstrating satisfactory performance in Chemical Oxygen Demand (COD) removal from industrial wastewater containing recalcitrant and inhibitory substances (46%–98%), which was estimated in the influent ranging from 3500 to 5500 mg/L, evidencing that coupling of bioreactors might lead to a effluent COD complying with environmental regulations.     

Statistical analysis in estimating probable concentrations of representative chemical species in leachate: a solution for the source term of new or unmonitored landfills

Journal of Material Cycles and Waste Management - Leakage modeling can be crucial for environmental management and control of waste landfills. However, defining boundary conditions for these models...     

Evaluating PFAS cross contamination issues

Avoiding cross contamination from per‐ and polyfluoroalkyl substances (PFAS) that may occur during sampling of environmental media is the key to ensure reliable analytical results during a PFAS sampling program. Due to the ubiquitous nature of PFAS in commonly used sampling materials and personal protective equipment, mitigating the risk of cross contamination is a challenge that requires a conservative approach when planning and executing a PFAS sampling program. This article describes a conservative approach to PFAS sampling and includes a case study that evaluated three insect repellent products to determine their suitability for use during PFAS investigation. The three products were verified to be PFAS‐free for the 17 PFAS included in the analysis and, therefore, these products are suitable for use during PFAS sampling activities without concern for cross contamination.     

Analysis of air quality in Dire Dawa,Ethiopia

Ambient air quality was monitored and analyzed to develop air quality index and its implications for livability and climate change in Dire Dawa, Ethiopia. Using survey research design, 16 georeferenced locations, representing different land uses, were randomly selected and assessed for sulfur dioxide (SO₂), nitrogen dioxide (NO₂), carbon dioxide (CO₂), carbon monoxide (CO),volatile organic compounds (VOCs), and meteorological parameters (temperature and relative humidity). The study found mean concentrations across all land uses for SO₂ of 0.37 ± 0.08 ppm, NO₂ of 0.13 ± 0.17 ppm, CO₂ of 465.65 ± 28.63 ppm, CO of 3.35 ± 2.04 ppm, and VOCs of 1850.67 ± 402 ppm. An air quality index indicated that ambient air quality for SO₂ was very poor, NO₂ ranged from moderate to very poor, whereas CO rating was moderate. Significant positive correlations existed between temperature and NO₂, CO₂, and CO and between humidity and VOCs. Significant relationships were also recorded between CO₂ and NO₂ and between CO and CO₂. Poor urban planning, inadequate pollution control measure, and weak capacity to monitor air quality have implications for energy usage, air quality, and local meteorological parameters, with subsequent feedback into global climate change. Implementation of programs to monitor and control emissions in order to reduce air pollution will provide health, economic, and environmental benefits to the city.

Implications: The need to develop and implement emission control programs to reduce air pollution in Dire Dawa City is urgent. This will provide enormous economic, health, and environmental benefits. It is expected that economic effects of air quality improvement will offset the expenditures for pollution control. Also, strategies that focus on air quality and climate change present a unique opportunity to engage different stakeholders in providing inclusive and sustainable development agenda for Dire Dawa.