Hatching with the enemy: Daphnia diapausing eggs hatch in the presence of fish kairomones

Summary. Infochemicals are known to play a key role in mediating predator-prey interactions, both in aquatic and terrestrial communities. However, state-dependent variation may exist in how effectively individuals can use this information, depending on genotype, life stage and experience. For our study, we used the predator-prey model system fish-waterflea Daphnia magna Straus (Cladocera, Daphniidae). Adult Daphnia use fish-derived infochemicals, so-called kairomones, as indicators of predation risk, and exhibit a spectrum of morphological, behavioural and life-history responses to the presence of fish kairomones. Here, we investigate whether diapausing eggs, an embryonic resting stage in the life cycle of D. magna, also use fish kairomones and tune their hatching to the risk of fish predation, as reported for diapausing stages of dinoflagellates. In two laboratory experiments, we studied hatching proportion and time until hatching of D. magna diapausing eggs in the absence and presence of fish kairomones. D. magna families differed significantly in their response to the presence of fish kairomones; some families reduced hatching proportion, whereas others increased it. Our results imply genotype-dependent differences in the hatching reactions to fish kairomones as observed for other traits in adult Daphnia.     

Life on the Edge: Vulnerability and Adaptation of African Ecosystems to Global Climate Change

Donor countriesare providing financial and technicalsupport for global climate change countrystudies to help African nations meet theirreporting needs under the United NationsFramework Convention on Climate Change(UNFCCC). Technical assistance to completevulnerability and adaptation assessmentsincludes training of analysts, sharing ofcontemporary tools (e.g. simulationmodels), data and assessment techniques,information-sharing workshops and aninternational exchange programme foranalysts. This chapter summarizes 14African country studies (Botswana, Côted'Ivoire, Egypt, Ethiopia, the Gambia,Kenya, Malawi, Mauritius, Nigeria, SouthAfrica, Tanzania, Uganda, Zambia andZimbabwe) assessing vulnerabilities toglobal climate change and identifyingadaptation options. The analysis revealedthat the participating African countriesare vulnerable to global climate change inmore than one of the followingsocio-economic sectors: coastal resources,agriculture, grasslands and livestock,water resources, forests, wildlife, andhuman health. This vulnerability isexacerbated by widespread poverty,recurrent droughts, inequitable landdistribution, environmental degradation,natural resource mismanagement anddependence on rain-fed agriculture. Arange of practical adaptation options wereidentified in key socio-economic sectors ofthe African nations analysed. However,underdeveloped human and institutionalcapacity, as well as the absence ofadequate infrastructure, renders manytraditional coping strategies (rooted inpolitical and economic stability)ineffective or insufficient. FutureAfrican country studies should be moreclosely coordinated with development ofnational climate change action plans     

Thriving on challenge stressors? Exploring time pressure and learning demands as antecedents of thriving at work

In the conceptualization of thriving at work, it is emphasized that employees' learning and vitality are two equally important components of thriving and that thriving is facilitated by contextual features and available resources. In this study, we examined the effects of two challenge stressors (time pressure and learning demands) on thriving at work. Based on the literature on challenge and hindrance stressors, we proposed that challenge stressors positively affect learning and negatively affect vitality. To uncover underlying mechanisms, we measured challenge appraisal and hindrance appraisal of work situations in a diary study. A sample of 124 knowledge workers responded to three daily surveys (before the lunch break, during the afternoon, and at the end of the workday) for a period of five workdays. Results indicate that the indirect effects of learning demands and time pressure on learning are mediated by challenge appraisal, whereas indirect effects of learning demands on vitality are mediated by hindrance appraisal. Overall, our study shows that challenge stressors have a positive total effect on learning but no total effect on vitality. These differential relationships call for a finer distinction between the two components of thriving at work in future research. Copyright © 2016 The Authors Journal of Organizational Behavior Published by John Wiley & Sons Ltd.     

Knowledge,attitudes and practices of occupational risks in Colombian taxi drivers

Objective. The objective of this study was to learn about the health and safety strategies in a sample of taxi drivers in Bucaramanga, Colombia. Methods. A cross-sectional study was conducted among 138 taxi drivers. A survey was used to identify the socio-demographic and working characteristics, knowledge, attitudes and practices according to their occupational risk. Results. Eighty-five percent of the workers labored 9–15?h/day. Of those who suffered accidents, 27% were not affiliated to an occupational risk administrator (p = 0.028). Of the workers who had a work-related accident, 58% considered that the use of a cell phone while driving would not always reduce their attention, 50% always used their seat belt and 7% took active breaks and wore their seat belt (p = 0.01). Conclusions. Within this group of taxi drivers, having or believing to possess knowledge regarding an occupational risk did not ensure that they had a safe attitude or safe working practices.     

Toxicity and Mutagenicity of Component Classes of Oils Isolated from Soils at Petroleum- and Creosote-Contaminated Sites

Abstract

Microtox and Ames bioassays were employed to assess acute toxicity and mutagenicity of water soluble components of class–fractionated oils extracted from one creosote–and four petroleum–contaminated soils. Microtox results revealed that potential acute toxicity resides mainly in the polar class fractions at three sites and indicated potential synergistic and antagonistic effects between compounds in the total extracts at two sites. Ames Salmonella/microsome testing indicated that the polyaromatic fractions at two sites exhibit weak mutagenicity with enzymatic activation, while the polar fractions at two sites are weakly mutagenic without enzyme activation. Further chemical characterization of the polar and polyaromatic fractions is required to fully assess the potential of health and ecological risks at the creosote–and petroleum–contaminated sites exhibiting these toxic responses.     

Quantifying structural physical habitat attributes using LIDAR and hyperspectral imagery

Structural physical habitat attributes include indices of stream size, channel gradient, substrate size, habitat complexity, and riparian vegetation cover and structure. The Environmental Monitoring and Assessment Program (EMAP) is designed to assess the status and trends of ecological resources at different scales. High-resolution remote sensing provides unique capabilities in detecting a variety of features and indicators of environmental health and condition. LIDAR is an airborne scanning laser system that provides data on topography, channel dimensions (width, depth), slope, channel complexity (residual pools, volume, morphometric complexity, hydraulic roughness), riparian vegetation (height and density), dimensions of riparian zone, anthropogenic alterations and disturbances, and channel and riparian interaction. Hyperspectral aerial imagery offers the advantage of high spectral and spatial resolution allowing for the detection and identification of riparian vegetation and natural and anthropogenic features at a resolution not possible with satellite imagery. When combined, or fused, these technologies comprise a powerful geospatial data set for assessing and monitoring lentic and lotic environmental characteristics and condition.     

Biotic homogenization and differentiation of plant communities in tropical and subtropical forests

Anthropogenic impacts on biodiversity can lead to biotic homogenization (BH) and biotic differentiation (BD). BH is a process of increasing similarity in community composition (including taxonomic, functional, and phylogenetic components), whereas BD is a process of decreasing similarity over space and time. Here, we conducted a systematic review of BH and BD in plant communities in tropical and subtropical forests to identify trends and knowledge gaps. Our bibliometric search in the Web of Science returned 1989 papers, of which 151 matched our criteria and were included in the analysis. The Neotropical region had the largest number of articles, and Brazil was the most represented country with 92 studies. Regarding the type of change, homogenization was more frequent than differentiation (noted in 69.6% of publications). The taxonomic diversity component was measured more often than functional and phylogenetic diversity components. Most studies (75.6%) assessed homogenization and differentiation based on a single observation in time; as opposed to few studies that monitored plant community over multiple years. Forest fragmentation was cited as the main determinant of homogenization and differentiation processes (57.2% of articles). Our results highlight the importance of evaluating community composition over time and more than taxonomic components (i.e., functional and phylogenetic) to advance understanding of homogenization and differentiation. Both processes were scale dependent and not mutually exclusive. As such, future research should consider differentiation as a potential transition phase to homogenization and that potential differences in both processes may depend on the spatial and temporal scale adopted. Understanding the complexity and causes of homogenization and differentiation is essential for biodiversity conservation in a world increasingly affected by anthropogenic disturbances.     

Particulates Generated from Combustion of Polymers (Plastics)

ABSTRACT

Yiannis A. Levendis is a professor in the Department of Mechanical, Industrial, and Manufacturing Engineering at Northeastern University. He holds a B.S. and an M.S. in mechanical engineering from the University of Michigan and a Ph.D. in environmental engineering from the California Institute of Technology. Brooke Shemwell is a graduate research assistant in the Department of Mechanical, Industrial, and Manufacturing Engineering at Northeastern University.

This is an experimental study on the characterization of particulate (soot) emissions from burning polymers. Emissions of polystyrene (PS), polyethylene (PE), polypropylene (PP), polymethyl methacrylate (PMMA), and polyvinyl chloride (PVC) plastics were studied. Combustion took place in a laboratory-scale, electrically heated, drop-tube furnace at temperatures of 1300 and 1500 K, in air. The nominal bulk (global) equivalence ratio, φ, was varied in the range of 0.5-1.5, and the gas residence time in the nearly isothermal radiation zone of the furnace was ≈ 1 sec. The particulate emissions were size-classified at the exit of the furnace, using a multi-stage inertial particle impactor. Results showed that both the yields and the size distributions of the emitted soot were remarkably different for the five plastics burned. Soot yields increased with an increasing bulk equivalence ratio. Combustion of PS yielded the highest amounts of soot (most highly agglomerated), several times more than the rest of the polymers. More soot was emitted from PS at 1500 than at 1300 K. Substantial amounts of soot agglomerates were larger than 9 μm. At 1500 and 1300 K, 35 and 29% of the soot mass, respectively, was PM₂ (2 μm or smaller). Emissions from PE and PP were remarkably similar to each other. These polymers produced very low emissions at f< 0.5, but emissions increased drastically with f, and most of the soot was very fine (70-97% of the mass was PM₂, depending on f).

Emissions from the combustion of PMMA were comparatively low and were the least influenced by the bulk f, and 79–95% of the emissions were PM₂. Combustion of PVC yielded the lowest amounts of soot; moreover, only 13–34% of the mass was PM₂. On a comparative basis, at 1500 K, the following ranges of particulate yields were PM₂: 19–75 mg/g of PS, 8–36 mg/g of PE, 1.5–47 mg/g of PP, 11–20 mg/g of PMMA, and 2–8 mg/g of PVC, depending on f. These comparative results demonstrate that PS produces the highest amounts of fine particulates, followed by PP, PE, and PMMA, and then PVC. Burning these materials with excess oxygen drastically reduces the par-ticulate emissions of PE and PP, substantially reduces those of PS, and mildly reduces those of PMMA and PVC.