Thermal Degradation and Kinetics of Alginate Polyurethane Hybrid Material Prepared from Alginic Acid as a Polyol

Alginate polyurethane hybrid materials are prepared by varying mole ratio of 2, 4-TDI as a di-isocyanate and alginic acid as a polyol in presence of dimethyl sulfoxide (DMSO) as a solvent. FT-IR and ¹³C one-dimensional (1D) solid state NMR (SSNMR) spectroscopy indicates that alginic acid is converted into alginate-polyurethane hybrid material via urethane linkage. Surface morphology of alginate-polyurethane hybrids changes by varying alginic acid: TDI ratio. The peak at near 221 °C in DSC thermogram of alginic acid (Alg) is shifted to higher temperature in alginate-polyurethane hybrid (Algpu1 and Algpu2). TGA study shows that alginate-polyurethane hybrid prepared using alginic acid: TDI = 1:1 (Algpu2) is more stable than alginic acid: TDI = 1:0.5 (Algpu1) at 300 °C. Kinetic analysis was performed to fit with TGA data, where the entire degradation process has been considered as three consecutive 1st order reactions. This study shows that thermal stability of alginate-polyurethane hybrid material was increased by adjusting mole ratio of 2, 4-TDI and alginic acid.     

Preparation of Alginic Acid and Metal Alginate from Algae and their Comparative Study

Alginic acid and metal alginates are prepared from fresh algae using extraction method. A FTIR spectrum indicates that alginic acid is converted into the metal alginate. Comparing calcium and cobalt alginates, asymmetric stretching of free carboxyl group of calcium alginate at 1630 cm⁻¹ is shifted to 1585 cm⁻¹ in cobalt alginate, due to the change of charge density, radius and atomic weight of the cation, creating a new environment around the carbonyl group. The strong exothermic peak of alginic acid in DSC thermogram indicates the decomposition of biopolymer, whereas strong exothermic peak of metal alginate in DSC thermogram attributed to the decomposition of biopolymer and formation of respective carbonate. Based on DSC study, the decomposition of cobalt alginate occurs at higher temperature comparing to those of sodium and calcium alginate, which may conclude into the higher stability of cobalt alginate. TGA results reveal that, cobalt alginate is more stable than calcium and sodium alginate at 300 °C temperature. Surface morphology (at same magnification), as well as porosity (%) and pore size distribution results change with metals present in different metal alginates.     

Effect of photo-biodegradation and biodegradation on the biogeochemical cycling of dissolved organic matter across diverse surface water bodies

The objective of this research was to quantify the temporal variation of dissolved organic matter(DOM) in five distinct waterbodies in watersheds with diverse types of land use and land cover in the presence and absence of sunlight. The water bodies were an agricultural pond, a lake in a forested watershed, a man-made reservoir, an estuary, and a bay. Two sets of samples were prepared by dispensing unfiltered samples into filtered samples in 1:10 ratio(V/V). The first set was exposed to sunlight(10 hr per day for 30 days) for examining the combined effect of photo-biodegradation, while the second set was stored in dark for examining biodegradation alone. Spectroscopic measurements in tandem with multivariate statistics were used to interpret DOM lability and composition. The results suggest that the agricultural pond behaved differently compared to other study locations during degradation experiments due to the presence of higher amount of microbial humic-like and protein-like components derived from microbial/anthropogenic sources. For all samples, a larger decrease in dissolved organic carbon(DOC) concentration(10.12% ±9.81% for photo-biodegradation and 6.65% ± 2.83% for biodegradation) and rapid transformation of DOM components(i.e., terrestrial humic-like components into microbial humic and protein-like components) were observed during photo-biodegradation experiments.Results suggest that sunlight facilitated DOM biodegradation, resulting in simpler recalcitrant molecules regardless of original composition. Overall, it was found that combined effects of light and bacteria are more efficient than bacterial effects alone in remineralizing and altering DOM, which highlights the crucial importance of sunlight in transforming aquatic DOM.     

Diplomacy for science: strategies to promote international collaboration

Technology innovation is an increasingly globalized exercise with dramatic consequences for scientific and diplomatic goals alike, and requires enhanced participation and integration of scientists and science-minded diplomats within diplomatic missions to advance shared policy goals. This more general problem is addressed in the present article by focusing on recent collaborations between U.S. and German scientists, including several of the coauthors.     

Dominance based fuzzy decision support framework for g-resilient (ecosilient) supplier selection: an empirical modelling

A novel decision support framework has been proposed herein to solve supplier selection problems by considering green as well as resiliency criteria, simultaneously. An expert team involving a finite number of Decision-Makers (DMs) is to be employed to obtain degree of importance of each of the evaluation criteria and also to assign an appropriate rating for each supplier alternative with respect to the criteria. Since subjective human judgment often bears some sort of ambiguity as well as vagueness, application of fuzzy set theory can be recommended in this context. The present work represents a dominance based decision support system in the light of fuzzy set theory which is basically a simplified version of TODIM and PROMETHEE. It explores dominance between two alternatives with respect to a particular criterion, based on which a global dominance measure is computed to facilitate ranking order of candidate suppliers. The approach proposed in this research seems straightforward which can exclude complex and tedious computational steps of TODIM as well as PROMETHEE. Application potential of the proposed dominance based fuzzy decision-making approach has been compared to that of Fuzzy-TOPSIS and Fuzzy-VIKOR. Good agreement has been observed. In addition to this, the concept of a unique performance index i.e. ‘g-resilient’ (also called ‘ecosilient’) index has been introduced to help in assessing suppliers’ overall performance extent. The work has also been extended to identify the ill (poor)-performing areas in which suppliers are lagging and seek further improvement towards enhancing g-resilient performance level.     

Distribution of organochlorine pesticides and heavy metal residues in fish and shellfish from Calicut region, Kerala, India

Fish collected from five different locations from the Calicut region, India were analysed for the levels of organochlorine pesticides (OCPs) and heavy metal (HM) residues in order to elucidate the status of these chemical contaminants in fish and shellfish meant for human consumption. The highest concentrations of OCPs detected in the edible portion of fish were 10.47, 70.57 and 28.35 ng g-1 wet weight, in marine, brackish water and freshwater, respectively. BHC and heptachlor epoxide formed the major share of OCPs in the marine fish while BHCs contributed to the major share in the freshwater and brackish water fish. The DDT (sum of DDT and its metabolites) ranged from 0.05 to 8 ng g-1 in the samples irrespective of the habitat. Among the HMs, Cu, Zn, Mn and Cr were present in the samples irrespective of the place of collection. About 22% of the samples from the freshwater area contained marginally higher lead content above the legal limit of 0.2-0.4 microg g-1. The Cr content ranged from 0.1 to 1.1 microg g-1 in the fish with marginally higher content in the fish from freshwater and marine regions (0.55-1.1 microg g-1). Mercury was detected in the samples (55%) from marine habitat only. The concentrations of OCPs and HMs in the samples, in general, were below the maximum residual level recommended by various organizations.     

Effect of Pollution On the Occurrence, Distribution and Sulphur Transformation Ability of the Thiobacilli in the River Ganga

The occurrence, distribution and nature of ambient thiobacilli along with their ability to oxidize different sulphur species under simulated natural and in vitro culture conditions were studied in the polluted and unpolluted sites of the River Ganga.

Thiobacillus thioparus, T. thiooxidans and T. denitrificans were isolated from the river water. the former two occurred in both polluted and unpolluted sites, while T. denitrificans occurred in polluted areas only. the paper pulp mill effluent discharge area contained the highest population of T. thioparus. the sewage drainage area showed relatively higher populations of T. thiooxidans and T. denitrificans.

The present study revealed that only biological oxidation of either thiosulphate or elemental sulphur occurred in the river water. All the thiobacilli screened oxidized thiosulphate, and three-fourths of them oxidized elemental sulphur. Some strains were found to be very good acidifiers. in spite of such acidification by the ambient thiobacilli, the pH of the river water remained alkaline. the specific rates of thiosulphate (0.18 -0.51 μMmolh^-1 mg^-1 cell) and sulphur (1.3 - 6.2 Normality day^-1 mg^-1 biomass) oxidations under simulated natural condition were found to be higher in polluted areas when compared with the unpolluted one (sulphur: 0.8 - 1.0 Normality day^-1 mg^-1).

Further, addition of thiouslphate or elemental sulphur in the river water in simulated in vitro condition resulted in the increase of respective oxidation rates. the variations in the natae of pollutants discharged into the river water influenced the oxidation rate of thiosulphate or sulphur.     

Cleaning the river Damodar (India): impact of COVID-19 lockdown on water quality and future rejuvenation strategies

Globally, it is established that the partial lockdown system assists to improve the health of the total environment due to inadequate anthropogenic actions in different economic sectors. The ample research on fitness of environment has been proved that the strict imposition of lockdown was the blessings of environment. The river Damodar has historical significance and lifeline for huge population of Jharkhand and West Bengal state of India but in the recent years the water quality has been deteriorated due to untreated industrial effluents and urban sewage. The main objective of this study is to examine the water quality of river Damodar during and prelockdown phase for domestic use and restoration of river ecosystem. A total of eleven (11) effluent discharge sites were selected in prelockdown and during lockdown phase. A new approach of water quality assessment, i.e., water pollution index (WPI) has been applied in this study. WPI is weightage free, unbiased method to analysis of water quality. The result shows that the physical, chemical and heavy elements were found beyond the standard limit in prelockdown period. The cation and anion were arranged in an order of Na²⁺ ?>?K⁺ ?>?Ca²⁺ ?>?Mg²⁺ and Cl^??>?So₄^??>?No₃^??>?F^? in both the sessions. WPI of prelockdown showed that about 100% water samples are of highly polluted. WPI of lockdown period showed that around 90.90% samples improved to ‘good quality’ and 9.10% of samples are of ‘moderately polluted.’ Hypothesis testing by ‘t’ test proved that there was a significant difference (ρ?=?0.05%) in values of each parameter between two periods. Null hypothesis was rejected and indicated the improvement of river water quality statistically. Spatial mapping using Arc GIS 10.4 interpolation (IDW) helps to understand spatial intensity of pollution load in two periods. This research study should be helpful for further management and spatial diagnosis of water resource of river Damodar.

     

Perchlorate contamination of groundwater from fireworks manufacturing area in South India

Perchlorate contamination was investigated in groundwater and surface water from Sivakasi and Madurai in the Tamil Nadu State of South India. Sensitive determination of perchlorate (LOQ?=?0.005 μg/L) was achieved by large-volume (500 μL) injection ion chromatography coupled with tandem mass spectrometry. Concentrations of perchlorate were <0.005–7,690 μg/L in groundwater (n?=?60), <0.005–30.2 μg/L in surface water (n?=?11), and 0.063–0.393 μg/L in tap water (n?=?3). Levels in groundwater were significantly higher in the fireworks factory area than in the other locations, indicating that the fireworks and safety match industries are principal sources of perchlorate pollution. This is the first study that reports the contamination status of perchlorate in this area and reveals firework manufacture to be the pollution source. Since perchlorate levels in 17 out of 57 groundwater samples from Sivakasi, and none from Madurai, exceeded the drinking water guideline level proposed by USEPA (15 μg/L), further investigation on human health is warranted.