Aspects and prospects of algal carbon capture and sequestration in ecosystems: a review

Long-term storage of carbon dioxide (CO₂) and other forms of carbon in non-atmospheric reservoirs is called carbon sequestration. Selective anthropogenic enrichment of the atmospheric carbon pool is causing dire environmental problems, thereby necessitating remediation by mitigation. Algae possess efficient carbon concentrating mechanisms and consequently high photosynthetic rates which make them suitable candidates for biosequestration of CO₂. Globally, nearly half of the atmospheric oxygen is generated by algal photosynthesis despite the fact that algae account for less than 1% of photosynthetic biomass. In water bodies, algae are responsible for creating the ‘biological pump’ that transports carbon from the upper sunlit waters to the depth below. A diverse array of photoautotrophs ranging from prokaryotic cyanobacteria to eukaryotic algae such as Chlorophytes, and even protists like euglenoids, contribute to this ‘biological pump’. It operates in a variety of aquatic ecosystems ranging from small freshwater ponds to the oceans where it has been most extensively studied. Two separate but intricately linked processes constitute this ‘biological pump’, viz. the ‘organic carbon pump’ and the ‘calcium carbonate pump’. The present review discusses the natural CO₂ sequestration processes carried out by algae and cyanobacteria in their native ecosystems.     

Assessment and occurrence of various heavy metals in surface water of Ganga river around Kolkata: a study for toxicity and ecological impact

A study was conducted during November, 2005–October, 2006 to evaluate the surface water quality of river Ganga around Kolkata. The samples were analyzed for a number of physico-chemical parameters using standard laboratory procedures and giving prime thrust to determine the heavy metal concentrations (Fe, Mn, Cu, Zn, Pb, Cd, Cr, and Ni) of surface water at four different locations of the river Ganga around Kolkata from two points (middle of the river stream and a discharge point) at each location. Out of 96 samples analyzed, Fe, Mn, Cu, Zn, and Ni were detected in 71, 47, 38, 60, and 45 samples in the concentrations ranging from 0.013 to 5.49, 0.022 to 1.78, 0.003 to 0.033, 0.005 to 0.293, and 0.045 to 0.24 mg L^???1, respectively. Cd and Pb were detected in six and 21 samples in the range of 0.005 to 0.006 and 0.05 to 0.53 mg L^???1, respectively. But Cr was not detected in any of the samples analyzed. The metals exhibited no significant variation with respect to sampling locations as well as discharge points. However, the concentration of those metals varied with season, being higher in rainy and lower in winter season.     

Remediation technologies for heavy metal contaminated groundwater

The contamination of groundwater by heavy metal, originating either from natural soil sources or from anthropogenic sources is a matter of utmost concern to the public health. Remediation of contaminated groundwater is of highest priority since billions of people all over the world use it for drinking purpose. In this paper, thirty five approaches for groundwater treatment have been reviewed and classified under three large categories viz chemical, biochemical/biological/biosorption and physico-chemical treatment processes. Comparison tables have been provided at the end of each process for a better understanding of each category. Selection of a suitable technology for contamination remediation at a particular site is one of the most challenging job due to extremely complex soil chemistry and aquifer characteristics and no thumb-rule can be suggested regarding this issue. In the past decade, iron based technologies, microbial remediation, biological sulphate reduction and various adsorbents played versatile and efficient remediation roles. Keeping the sustainability issues and environmental ethics in mind, the technologies encompassing natural chemistry, bioremediation and biosorption are recommended to be adopted in appropriate cases. In many places, two or more techniques can work synergistically for better results. Processes such as chelate extraction and chemical soil washings are advisable only for recovery of valuable metals in highly contaminated industrial sites depending on economical feasibility.     

Occurrence of heavy metals in fish: a study for impact assessment in industry prone aquatic environment around Kolkata in India

A study was conducted during November 2005-October 2006 for determining the heavy metal contamination in surface water and sediments and giving prime thrust to determine the heavy metal concentrations fish samples collected from various points of the river Ganga at different time interval. Fish samples (viz., Channa marulius and Aorichthys seengala) were analyzed for heavy metals using standard laboratory procedures by AAS method. In impact points the annual average values for Cu, Cr, Cd, Pb and Zn were 0.15, 0.04, 0.03, 0.02 and 0.29 ppm, respectively. The concentrations of heavy metals in the riverine water collected from middle point had the order Zn > Cu > Cr > Cd > Pb. The data indicated that copper was maximally accumulated in the riverine sediments whereas least annual average concentration was obtained for lead. The trend of accumulation suggested deposition was maximum for zinc and minimum for cadmium in the muscles of both fish species. Only zinc has shown some significant seasonal variation in relation to metal deposition in fish muscles (minimum in monsoon and maximum in summer). The heavy metal contamination to fish may be due to indiscriminate discharge of polluted and untreated sewage sludge to the river. The heavy metal contents in fish at some places are alarming.     

Engineering layout of fuel tanks in a tank farm

The present paper deals with the location of tanks in a tank farm, in chemical and allied industries. Ideally the tanks are so placed and installed that in case of fire, the neighbouring tanks could remain safe. The safe distance of separation among the tanks is calculated in no wind condition, as well as, in the presence of wind. The paper uses the methods available in literature and modifies the point source model to include the effect of wind vector on the flame height during the calculation of safe inter-tank distance. It is found that for wind velocity > 4 m/s, the modified point source model provides appropriate inter-tank distance. However, for no wind and with wind velocity < 4 m/s, the Shokri-Beyler’s method provides safe inter-tank distance.     

Assessment of alpha activity of building materials commonly used in West Bengal, India

This paper, reports for the first time, an extensive study of alpha activity of all widely used building materials (plaster of Paris, stone chips, marble, white cement, mosaic stone, limestone, sand, granite, cement brick, asbestos, red brick, cement tile, ceramic tile and ceramics) in West Bengal, India. The alpha activities have been measured using Solid State Nuclear Track Detector (SSNTD), a very sensitive detector for alpha particles. The samples were collected from local markets of Kolkata. The measured average alpha activities ranged from 22.7+/-2.5 to 590.6+/-16.8Bqkg(-1). The alpha activity of ceramic tiles was highest and provides additional data to estimate the effect of environmental radiation exposure on human health.     

To reduce and not to reduce resource consumption? That is two questions

Recent research shows that because they rely on separate goals, cognitions about not performing a behaviour are not simple opposites of cognitions about performing the same behaviour. Using this perspective, two studies (N = 758 & N = 104) examined the psycho-social determinants of reduction in resource consumption. Results showed that goals associated with reducing versus not reducing resource consumption were not simple opposites (Study 1). Additionally, the discriminant validity of the Theory of Planned Behaviour constructs associated with reducing versus not reducing resource consumption was demonstrated (Study 1 & 2). Moreover, results revealed the incremental validity of both Intentions (to reduce and to not reduce resource consumption) for predicting a series of behaviours (Study 1 & 2). Finally, results indicated a mediation role for the importance of ecological dimensions on the effect of both Intentions on a mock TV choice and a mediation role for the importance of non ecological dimensions on the effect of Intention of not reducing on the same TV choice. Discussion is organized around the consequences, at both theoretical and applied levels, of considering separate motivational systems for reducing and not reducing resource consumption.     

Dissipation kinetics of tetraconazole in three types of soil and water under laboratory condition

Laboratory experiment was conducted to understand the persistence behavior of tetraconazole in three soils of West Bengal (alluvial, red lateritic, and coastal saline) and also in water maintained at three different pH (4.0, 7.0, and 9.2) conditions. Processed soil samples (100 g) were spiked at two treatment doses: 2.5 μg/g (T₁) and 5.0 μg/g (T₂). Double distilled buffered water (200 ml) was spiked at two treatment doses: 1.0 μg/ml (T₁) and 2.00 μg/ml (T₂). The tetraconazole dissipation followed first-order reaction kinetics and the residual half-life (T _1/2) values in soil were found to be in the range of 66.9–77.2 days for T₁ and 73.4–86.0 days for T₂. The persistence increased in the order red lateritic > new alluvial > coastal saline. Interestingly, the red lateritic soil exhibited the lowest pH (5.56) and organic carbon (0.52 %) content as compared to other two soils. However, the dissipation of tetraconazole in case of water was not pH dependant. The T _1/2 values in water were in the range of 94 to 125 days. The study indicated the persistent nature of tetraconazole in soil and water.     

Health hazard assessment in an industrial town with the help of GRAM-GIS

Unplanned industrialization and urbanization are causing health hazard mainly in developing countries. It is essential to assess the magnitude of future hazard in an industrial town. The geographical information system is a special type of tool evolved to analyse geographic data for efficient planning. In India large-scale industrialization started after independence. New industrial towns have been established and Durgapur in West Bengal is one of them. In this study an indigenously developed GIS package GRAM has been used to assess air quality in Durgapur town. Using GIS, interpolated maps have been prepared showing the distribution of five pollutants, i.e. carbon monoxide, total oxidant, nitrogen-oxide, sulfur-dioxide and suspended particulate matter. The maps have been used to find the pollutant standard index of the area. The final map shows that the PSI index is high and ranges between the unhealthy to very unhealthy category. This map has been combined with a present landuse pattern. There are three pockets of extremely poor air quality zones which generally match with industrial units. Areas around these units are the potential zones of health hazard. Large numbers of patients admitted in hospitals here suffer from obstructive diseases. Most of them belong to the working age group. This may indicate that the main work force is exposed to the health hazard due to industrial pollution.     

Natural radioactivity and radiation exposure in the high background area at Chhatrapur beach placer deposit of Orissa, India

A high natural background radiation area is reported for the Chhatrapur beach placer deposit of Orissa state, on the southeastern coast of India, due to the presence of radiogenic heavy minerals. The average activity concentrations of radioactive elements 232Th, 238U and 40K were measured by gamma-ray spectrometry using a HPGe detector, and found to be 2500 +/-1850, 230 +/- 140 and 120 +/- 35 Bq kg-1, respectively, for the bulk sand samples. The absorbed gamma dose rates in air due to the naturally occurring radionuclides varied from 375 to 5000 nGy h-1, with an average value of 1625 +/- 1200 nGy h-1. The external annual effective dose rate of the region ranged from 0.46 to 6.12 mSv y-1, with an average value of 1625 +/- 1200 mSv y-1. The absorbed gamma dose rate levels of Chhatrapur beach area were similar to the monazite sand-bearing high background radiation areas of southern and southwestern coastal tracts of India and other similar areas of the world. The major contributors to the enhanced level of radiation are monazite and zircon sands.