Development of a Safe Solid-State Microorganism/Biodegradable Polymer Composite for Decomposition of Formaldehyde

A very safe and environmentally friendly solid-state material for bioremediation was prepared using a combination of Aspergillus oryzae and poly(ε-caprolactone) (PCL), a porous biodegradable polymer. The novel material was capable of decomposing 200 ppm formaldehyde solutions to 0 ppm within 7 days. Degradation ability was prolonged by addition of yeast extract-peptone-dextrose medium into the composite; 200 ppm formaldehyde was decomposed to 0 ppm over eight additional decomposition cycles and 100 days. A unique mechanism is proposed where, during PCL degradation, the solid-state composite provides nutrients to A. oryzae.     

Preparation of Natural Rubber/Condensed Tannin Semi-interpenetrating Polymer Network Composites by Hematin-Catalyzed Cross-Linking

In this study, the preparation of semi-interpenetrating polymer network (semi-IPN) composites composed of natural rubber and condensed tannin was performed by means of the enzyme-mimetic cross-linking of condensed tannin catalyzed by hematin. Prior to the preparation of the composites, the hematin-catalyzed cross-linking behavior of condensed tannin was evaluated by the TGA measurement. The TGA results indicated that condensed tannin was sufficiently cross-linked by the hematin-catalyzed reaction in the presence of appropriate amounts of 30% (w/v) H₂O₂ aq. to give the relatively thermostable materials. For the preparation of the composites, a solution of condensed tannin and hematin, and subsequently 30% (w/v) H₂O₂ aq. were added to natural rubber latex and the mixture was stirred at room temperature for 10 min to perform the cross-linking of condensed tannin, followed by drying of the reaction mixture at 50 °C for 5 h, which was subsequently put into a heat device and hot-pressed at 100 °C and 20 MPa for 20 min to give the semi-IPN composite. The tensile stress?Cstrain measurement of the composites was conducted to evaluate the mechanical properties, which were changeable depending on the weight ratios of natural rubber to condensed tannin and the amounts of 30% (w/v) H₂O₂ aq. Moreover, the miscibility of the cross-linked tannin with natural rubber in the composite was evaluated by the SEM measurement.     

Dioxin concentration in human milk in Hebei province in China and Tokyo, Japan: potential dietary risk factors and determination of possible sources

Very limited information is available on body burdens and environmental levels of dioxins and dioxin-like PCBs (dl-PCBs) in mainland China. In the current studies, human milk samples were collected from 30 breastfeeding mothers in Shijiazhuang city (industrialized) and 11 in the Tanshan countryside (agricultural) of Hebei Province in northern China. An additional 20 samples were obtained from mothers in Tokyo, Japan. PCDDs, PCDFs, and dl-PCBs in human milk were analyzed by high-resolution gas chromatography/high-resolution mass spectrometry. Our results show that arithmetic means for body burdens of PCDDs/Fs and dl-PCBs in Hebei were 3.6 and 1.9 pg TEQ g⁻¹ fat, respectively, which were only about one fourth of the levels in Japan. In addition, no difference was found in the chemical levels except dl-PCBs between the urban and rural areas. Based on the results of an in-person interview of the Chinese mothers using a 59-item questionnaire, freshwater fish consumption was found to correlate with the body burden of dioxins. Principal component analysis of dioxin congeners revealed that the patterns of dioxins in the Hebei urban and rural areas are quite similar; however, they are clearly different from those in Japan. Collectively, our results suggest that the lower body burdens of dioxin in Hebei may be due in part to the relatively slow industrialization and a lower consumption of marine foods. Finally, the results indicate that comprehensive monitoring of dioxins and dl-PCBs in humans as well as in the environment and foods is necessary in China.     

Estimation of Contamination Sources of Human Enteroviruses in a Wastewater Treatment and Reclamation System by PCR–DGGE

A polymerase chain reaction–denaturing gradient gel electrophoresis (PCR–DGGE) method was employed to estimate the contamination sources of human enteroviruses and understand how their dominant strains vary in a wastewater treatment and reclamation system consisting of sewage collection, wastewater treatment with membrane bioreactor and open lakes for reclaimed water storage and reuse. After PCR–DGGE using a selected primer set targeting enteroviruses, phylogenetic analysis of acquired enterovirus gene sequences was performed. Enteroviruses identified from the septic tank were much more diverse than those from grey water and kitchen wastewater. Several unique types of enterovirus different from those in wastewater samples were dominant in a biological wastewater treatment unit. Membrane filtration followed by chlorination was proved effective for physically eliminating enteroviruses; however, secondary contamination likely occurred as the reclaimed water was stored in artificial lakes. Enterovirus 71 (EV71), a hand-foot-and-mouth disease (HFMD) viral pathogen, was detected mainly from the artificial lakes, implying that wastewater effluent was not the contamination source of EV71 and that there were unidentified non-point sources of the contamination with the HFMD viral pathogen in the reclaimed water stored in the artificial lakes. The PCR–DGGE targeting enteroviruses provided robust evidence about viral contamination sources in the wastewater treatment and reclamation system.     

Diphenylmethane diisocyanate self-polymerization: Thermal hazard evaluation and proof of runaway reaction in gram scale

Thermal analysis by differential scanning calorimetry and thermogravimetric/differential thermal analysis mass spectrometry, adiabatic calorimetry, a gram-scale heating test, and infrared spectroscopy were performed to evaluate the thermal hazards of diphenylmethane diisocyanate (MDI) and prove the occurrence of a runaway reaction. The self-polymerization of MDI was found to occur at about 340 °C under rapid heating conditions. Carbon dioxide was eliminated and heat was generated to allow polymerization. Under adiabatic and closed conditions, the runaway reaction of MDI can begin at least from 220 °C. Besides it is highly probable that the runaway reaction of MDI can begin from a lower temperature in an actual process scale. More heat was generated than in the previous case and the pressure rose rapidly. A closed 2-mm-thick glass vessel exploded because of the runaway reaction of MDI even if the temperature was lower than 300 °C. Therefore, MDI could cause fatal runaway reactions below 300 °C, where MDI had been assumed to self-polymerize by eliminating carbon dioxide previously.     

Use of two population metrics clarifies biodiversity dynamics in large-scale monitoring: the case of trees in Japanese old-growth forests

An alkaline comet assay and a micronucleus test were carried out on erythrocytes of the European chub, Squalius cephalus L., collected in spring and autumn in 2005 and 2006 at three sampling sites in River Sava, near Zagreb, Croatia. The results of comet assay showed the lowest genotoxic influence at the least polluted site, while higher DNA damage was observed at the polluted sites. Although the basal levels of DNA damage were elevated, a clear gradation of DNA damage was found due to pollution intensity in all sampling periods. The lowest cytogenetic damage as revealed by the micronucleus test (MNT) was observed as well at the least polluted site. High variations in MN frequency were observed between sampling periods, although the number of micronucleated erythrocytes was consistently the highest one at the polluted site. The comet assay as a biomarker of genotoxic effect exhibited higher sensitivity in discriminating the genotoxic capacity of studied polluted sites while the MNT was less sensitive. However, both tests should be used together in biomonitoring studies because they can reveal different aspects of DNA damage; comet assay, the early event of genotoxic exposure, and MNT, its final result as a mutagenic potential.     

美人蕉根系对铜绿微囊藻的化感作用

通过在铜绿微囊藻(Microcystis aeruginosa)培养物中添加美人蕉(Canna indica)种植水的方式,研究了美人蕉种植水对铜绿微囊藻的抑制效应. 结果表明:①以蒸馏水培养3 d收集获得的美人蕉种植水对铜绿微囊藻的生长有明显的抑制作用; 在与铜绿微囊藻共培养20 d后,美人蕉种植水对铜绿微囊藻的抑制率最高可达64.4%,对照组铜绿微囊藻中ρ(Chla)是种植水的1.98倍. ②美人蕉种植水(根系分泌物)中有乳酸、己二酸、棕榈酸、乙二醇和硬脂酸等10种脂肪酸,其根系提取物中有乳酸、3-儿茶酚乳酸、亚油酸和棕榈酸等19种物质. ③美人蕉种植水和根系提取物中乳酸含量均最高,美人蕉根系提取物中化合物种类多于种植水,美人蕉种植水中绝大部分化合物在其根系提取物中均可找到. 推断美人蕉自身代谢产生的化感物质释放于水体中,可有效抑制铜绿微囊藻的正常生长.      

Influence of coating method on catalyst activity of AgCl/Al2O3/SUS304 composite plate

The γ-Al₂0₃ and AgCl/Al₂0₃ catalyst powder were coated on a stainless steel substrate by dip coating and electrophoretic deposition method. And AgCl/Al₂0₃ catalyst was produced by three kinds of methods, and the difference between the NOx reduction catalysis of the coated sample was compared. XRD and SEM were used to study the crystalline structure and cross-section of the coatings. The coating of γ-Al₂0₃ with the thickness of 3-5 μm and AgCl/Al₂0₃ catalyst with the thickness of 5-9 μrn were made on the surface of SUS304 plate without exfoliation. The NOx conversion of the coated sample with catalyst was about 70% at the maximum.     

Microfluidic quantification of multiple enteric and opportunistic bacterial pathogens in roof-harvested rainwater tank samples

Potable and non-potable uses of roof-harvested rainwater (RHRW) are increasing due to water shortages. To protect human health risks, it is important to identify and quantify disease-causing pathogens in RHRW so that appropriate treatment options can be implemented. We used a microfluidic quantitative PCR (MFQPCR) system for the quantitative detection of a wide array of fecal indicator bacteria (FIB) and pathogens in RHRW tank samples along with culturable FIB and conventional qPCR analysis of selected pathogens. Among the nine pathogenic bacteria and their associated genes tested with the MFQPCR, 4.86 and 2.77% samples were positive for Legionella pneumophila and Shigella spp., respectively. The remaining seven pathogens were absent. MFQPCR and conventional qPCR results showed good agreement. Therefore, direct pathogen quantification by MFQPCR systems may be advantageous for circumstances where a thorough microbial analysis is required to assess the public health risks from multiple pathogens that occur simultaneously in the target water source.