Waterfowl abundance does not predict the dominant avian source of beach Escherichia coli

The horizontal, fluorophore enhanced, rep-PCR (HFERP) DNA fingerprinting technique was used to identify potential sources of in water, nearshore sand, and sediment at two beaches in the Duluth-Superior Harbor, near Duluth, MN, and Superior, WI, during May, July, and September 2006. An animal or environmental source could be identified for 35, 29, and 30% of strains in water, sand, and sediments, respectively. Waterfowl, including Canada geese, ring-billed gulls, and mallard ducks, were the largest source of that could be identified in water (55-100%), sand (59-100%), and sediment (92-100%) at both beaches. Although ring-billed gulls were more abundant in this harbor, Canada geese were usually the dominant source of waterfowl found at these beaches. The percentage of identified from treated wastewater was always less than the percentage of originating from waterfowl. At both beaches, the percentage of in water contributed by treated wastewater was higher in May compared with July and September. The larger proportion of wastewater-derived seen in May probably reflected a smaller contribution of from geese when these birds were less abundant rather than an absolute increase in from treated wastewater. Microbial source analysis and bird census data both indicated that waterfowl were a major source of at beaches in the Duluth-Superior Harbor. These data also indicated it is risky to assume that the most abundant waterfowl species present in waterways will also be the largest source of avian-derived in water, nearshore sand, and sediments at beaches.     

Degradation of polychlorinated dibenzo-p-dioxins in aqueous solution by Fe(II)/H2O2/UV system

The photodegradation of polychlorinated dibenzo-p-dioxins (PCDDs), which include tetra- to octa-CDDs (TeCDD, PeCDD, HxCDD, HpCDD and OCDD), was carried out in the presence of Fe(II) and H2O2 mixed reagent. The degradation efficiency was strongly influenced by UV irradiation, and the initial concentrations of H2O2 and Fe(II). An initial TeCDD concentration of 10 ng l(-1) was completely degraded within 20 min under the optimum conditions. All PCDDs tested were successfully degraded by Fe(II)/H2O2/UV treatment and complete degradation of TeCDD, PeCDD and HxCDD was achieved within 120 min. PCDD photodegradation rates decreased with the number of chlorine atoms. The degradation process of TeCDD by this system seems to be initiated by an oxidative reaction (OH* radical attack) because less chlorinated DDs as intermediate products were not detected. From the Frontier electron density calculation, the first OH* radical attack positions on TeCDD were found to be four C atoms neighboring two O atoms. The decomposition of TeCDD gave 4,5-dichlorocatechol as an intermediate product. A TeCDD degradation scheme was proposed based on the identified intermediate and the values of Frontier electron density. Based on these results, Fe(II)/H2O2/UV system could be useful technology for the treatment of wastewater containing persistent pollutants such as dioxins and polychlorinated biphenyls.     

Formaldehyde Exposure in a Gross Anatomy Laboratory. Personal Exposure Level Is Higher Than Indoor Concentration (5 pp)

Goal, Scope and Background Cadavers for gross anatomy laboratories are usually prepared by using embalming fluid which contains formaldehyde (FA) as a principal component. During the process of dissection, FA vapors are emitted from the cadavers, resulting in the exposure of medical students and their instructors to elevated levels of FA in the laboratory. The American Conference of Governmental Industrial Hygienists (ACGIH) has set a ceiling limit for FA at 0.3 ppm. In Japan, the Ministry of Health, Labour and Welfare has set an air quality guideline defining two limit values for environmental exposure to FA: 0.08 ppm as an average for general workplaces and 0.25 ppm for specific workplaces such as an FA factory. Although there are many reports on indoor FA concentrations in gross anatomy laboratories, only a few reports have described personal FA exposure levels. The purpose of the present study was to clarify personal exposure levels as well as indoor FA concentrations in our laboratory in order to investigate the relationship between them. Methods The gross anatomy laboratory was evaluated in the 4th, 10th and 18th sessions of 20 laboratory sessions in total over a period of 10 weeks. Air samples were collected using a diffusive sampling device for organic carbonyl compounds. Area samples were taken in the center and four corners of the laboratory during the entire time of each session (4-6 hours). Personal samples were collected from instructors and students using a sampling device pinned on each person's lapel, and they were 1.1 to 6 hours in duration. Analysis was carried out using high performance liquid chromatography. Results and Discussion Room averages of FA concentrations were 0.45, 0.38 and 0.68 ppm for the 4th, 10th and 18th sessions, respectively, ranging from 0.23 to 1.03 ppm. These levels were comparable to or relatively lower than the levels reported previously, but were still higher than the guideline limit for specific workplaces in Japan and the ACGIH ceiling limit. The indoor FA concentrations varied depending on the contents of laboratory sessions and seemed to increase when body cavity or deep structures were being dissected. In all sessions but the 4th, FA levels at the center of the room were higher than those in the corners. This might be related to the arrangement of air supply diffusers and return grills. However, it cannot be ruled out that FA levels in the corners were lowered by leakage of FA through the doors and windows. Average personal exposure levels were 0.80, 0.45 and 0.51 ppm for instructors and 1.02, 1.08 and 0.89 ppm for students for the 4th, 10th and 18th session, respectively. The exposure levels of students were significantly higher than the mean indoor FA concentrations in the 4th and 10th sessions, and the same tendency was also observed in the 18th session. The personal exposure level of instructors was also significantly higher than the indoor FA level in the 4th session, while they were almost the same in the 10th and 18th sessions. Differences in behavior during the sessions might reflect the differential personal exposure levels between students and instructors. Conclusion The present study revealed that, if a person is close to the cadavers during the gross anatomy laboratory, his/her personal exposure level is possibly 2 to 3-fold higher than the mean indoor FA concentration. This should be considered in the risk assessment of FA in gross anatomy laboratories. Recommendation and Outlook If the risk of FA in gross anatomy laboratories is assessed based on the indoor FA levels, the possibility that personal exposure levels are 2 to 3-fold higher than the mean indoor FA level should be taken into account. Otherwise, the risk should be assessed based on the personal exposure levels. However, it is hard to measure everyone's exposure level. Therefore, further studies are necessary to develop a method of personal exposure assessment from the indoor FA concentration.     

Removal of heavy metals in rinsing wastewater from plating factory by adsorption with economical viable materials

The removal of heavy metals from plating factory wastewater with economical materials was investigated by the column method. Montmorillonite, kaolin, tobermorite, magnetite, silica gel and alumina were used as the economical adsorbents to wastewater containing Cd(II), Cr(VI), Cu(II) and Pb(II). This removal method of heavy metals proved highly effective as removal efficiency tended to increase with increasing pH and decrease with increasing metal concentration. The removal percentages by adsorption onto montmorillonite, tobermorite, magnetite, and silica gel showed high values for all metals. From the results for the heat of adsorption, the adsorption process in the present study might be chemisorption. The proposed method was successfully applied to the removal of Cd(II), Cr(VI) and Cu(II) in rinsing wastewater from plating factory in Nagoya City, Aichi Prefecture, Japan. Since the economical adsorbents used can be obtained commercially because they are easily synthesized, the wastewater treatment system developed is rapid, simple and cheap for the removal of heavy metals.     

Genome size of termites (Insecta, Dictyoptera, Isoptera) and wood roaches (Insecta, Dictyoptera, Cryptocercidae)

The evolution of genome size has been discussed in relation to the evolution of various biological traits. In the present study, the genome sizes of 22 dictyopteran species were estimated by Feulgen image analysis densitometry and 6-diamidino-2-phenylindole (DAPI)-based flow cytometry. The haploid genome sizes (C-values) of termites (Isoptera) ranged from 0.58 to 1.90 pg, and those of Cryptocercus wood roaches (Cryptocercidae) were 1.16 to 1.32 pg. Compared to known values of other cockroaches (Blattaria) and mantids (Mantodea), these values are low. A relatively small genome size appears to be a (syn)apomorphy of Isoptera + Cryptocercus, together with their sociality. In some phylogenetic groups, genome size evolution is thought to be influenced by selective pressure on a particular trait, such as cell size or rate of development. The present results raise the possibility that genome size is influenced by selective pressures on traits associated with the evolution of sociality.     

Social system and reproduction of helpers in a cooperatively breeding cichlid fish (Julidochromis ornatus) in Lake Tanganyika: field observations and parentage analyses

It is suggested that some fish of the genus Julidochromis, substrate-brooding Tanganyikan cichlids with biparental care, breed cooperatively with helpers. We studied the social system of J. ornatus in the wild and analysed genetic parentage using microsatellites. Within the studied population three patterns of social system were identified: monogamous pairs (61%, 44 of 72 groups), pairs with helpers (29%, 21), and polygamous harems with helpers (controlled by either a large female or large male owner; 10%, 7). In cooperatively breeding groups, the number of helpers at each nest ranged from 1 to 6 (median 1), and male helpers were more numerous than female helpers. In both sexes, the body size was different among individuals of different social status (harem owner > breeder > helper). Helpers and harem owners of both sexes exhibited brood defence although its frequency was low. The molecular analysis revealed that (1) the helpers were mostly unrelated to dominant breeders, (2) many helpers of both sexes contributed genetically to the next generations, (3) male helpers had high siring success (41% of young in total), and (4) large young unrelated to group members were detected at 30% of observed nests, which may be due to breeder (or helper) replacements and immigration of young. We discuss the implications of these results for understanding the complex social system of this species, especially the low reproductive skew in comparison with other cooperatively breeding cichlids.     

Light Stability of Oriental Lacquer Films Irradiated by a Fluorescent Lamp

Oriental lacquer film was prepared and exposed to a fluorescent lamp. The color difference and gloss of the surface of the film decreased compared to those of film kept in a dark place by irradiation with the fluorescent light. The percentage of discoloration was 7.0% on a relative scale with an irradiation of 3600 h. The surface of the film was characterized by X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy. The oxygen content of the surface increased considerably with the decrease in triene groups with exposure time. These changes were also observed when the film was exposed in a glass or acrylic plate box. The change of the above properties was not observed when the film was kept in a dark place for more than 4800 h. The results suggest that oriental lacquer film deteriorates even under irradiation with visible light.     

Mid-trimester fetal sex determination from maternal peripheral blood by fluorescence in situ hybridization without enrichment of fetal cells

To determine the fetal sex on 30 women who were 16–20 weeks pregnant, about 100 000 maternal blood nucleated cells were analysed by means of fluorescence in situ hybridization (FISH) with a Y-chromosome-specific DNA probe. Cells with the hybridization signal were detected in 12 of the 30 women. All the 12 mothers gave birth to a male child. Of the other 18 women who had no Y-positive cells in the peripheral blood, 14 gave birth to a female child and four gave birth to a male child. These false-negative results probably occurred because the number of cells examined was inadequate. The data obtained in this study suggest that fetal sex determination using maternal peripheral blood with FISH is possible and that this diagnostic method will be clinically useful when more cells are analysed.     

The Energy and Environmental Benefits of Superconducting Power Products

Superconductivity has the potential to bring a more fundamental change to electric power technologies than has occurred since electricity use became widespread nearly a century ago. The potential is for an energy revolution as profound as the impact fiber optics has had on communications. The fiber optic ‘information superhighway’ was constructed by replacing copper wires with a higher capacity alternative. Superconductivity provides an ‘energy superhighway’ that greatly improves efficiency and capacity. The economic and energy impacts of superconductors are predicted to be huge. Many challenges are being addressed in order for superconductivity to play this important role in the electric power system. The difficult challenge is underway in many countries to manufacture electrical wire from the ceramic high-temperature superconducting (HTS) materials, while in parallel, super-efficient power devices that use these wires are being designed and demonstrated in field trials. The benefits can be substantial: HTS wires that are a resistance-free alternative to conventional wires while carrying 100 times the amount of electricity; oil-free electrical equipment that is environmentally benign, with half the energy losses and half the size of conventional alternatives; and addressable markets estimated to exceed US$10 billion per annum within the next two decades. The savings due to increased efficiency of HTS electric power products may exceed 36 million metric tons of CO₂ in Japan, and much higher numbers in the U.S. and Europe, if generation continues to rely upon fossil fuels.     

Bacterial community succession during the enrichment of chemolithoautotrophic arsenite oxidizing bacteria at high arsenic concentrations

To generate cost-effective technologies for the removal of arsenic from water, we developed an enrichment culture of chemolithoautotrophic arsenite oxidizing bacteria (CAOs) that could effectively oxidize widely ranging concentrations of As(III) to As(V). In addition, we attempted to elucidate the enrichment process and characterize the microbial composition of the enrichment culture. A CAOs enrichment culture capable of stably oxidizing As(III) to As(V) was successfully constructed through repeated batch cultivation for more than 700 days, during which time the initial As(III) concentrations were increased in a stepwise manner from 1 to 10-12 mmol/L. As(III) oxidation activity of the enrichment culture gradually improved, and 10-12 mmol/L As(III) was almost completely oxidized within four days. Terminal restriction fragment length polymorphism analysis showed that the dominant bacteria in the enrichment culture varied drastically during the enrichment process depending on the As(III) concentration. Isolation and characterization of bacteria in the enrichment culture revealed that the presence of multiple CAOs with various As(III) oxidation abilities enabled the culture to adapt to a wide range of As(III) concentrations. The CAOs enrichment culture constructed here may be useful for pretreatment of water from which arsenic is being removed.