Microwave assisted solvent-free synthesis and biological activities of novel imines (Schiff bases)

Twelve new ortho-Hydroxyketimines were synthesized by conventional as well as microwave method and evaluated for their antinemic activity against Meloidogyne incognita [(Kofoid and White) Chitwood]. Conventional methods for synthesis of Schiff bases require refluxing at 140°C of the reactants in different solvents for at least 24 h or more, where as the microwave-assisted synthesis has brought down the reaction time from 24 h to 1 minute. The procedure reported is simple as it does not require any organic solvents and the time has been reduced to only 1 minute. Comparative yields of all compounds by different methods revealed that the yield was low in conventional method (79–87%) as compared to microwave assisted synthesis (94–97%). The bioassay revealed that all the test compounds exhibited promising nematicidal activity; N-propyl-2-hydroxypropiophenonimine being the most effective with LC₅₀ value of 74.46 mgL^?1 followed by N-hexyl-2-hydroxyacetophenonimine with LC₅₀ value of 99.60 mgL^?1 after 72 h of exposure. The results obtained from bioassay indicated that this class of compounds has not only given a lead with regard to potential of Schiff bases in pest control, but has suggested that a carbon chain length of 6 atoms in the side chain is optimum on the basis of structure activity relationship (SAR).     

Semen quality of environmentally exposed human population: the toxicological consequence

Human data on the relationship of semen quality with pesticide and metals are mostly inconsistent. The purpose of the study is to confirm the toxicity of organochlorine pesticide β- and γ-hexachlorocyclohexane (HCH), DDE and DDD, and metals lead or cadmium on sperm motility in epidemiological study among fertile and infertile men and to determine whether in vivo and in vitro results are in the same direction. Semen analysis and estimation of the toxicants were done in 60 fertile and 150 infertile men. In the in vitro studies, sperm were exposed to the highest levels of these toxicants found in vivo, as well as five and ten times higher, and to the mixture of all compounds. The study assesses sperm viability and motility for a period ranging between 30 min and 96 h. Epidemiological data showed an inverse correlation of toxicant with sperm motility. In vitro study showed that γ-HCH and lead after 12 h, cadmium after 8 h, and coexposure to toxicants after 6 h of exposure caused significant concentration- and duration-dependent decline in sperm motility. Data of in vitro study were concurrent with epidemiological finding that might be useful in establishing the possible association between exposure and effect of these selected pollutants on sperm motility.     

Effect of compression ratio,nozzle opening pressure,engine load,and butanol addition on nanoparticle emissions from a non-road diesel engine

Currently, diesel engines are more preferred over gasoline engines due to their higher torque output and fuel economy. However, diesel engines confront major challenge of meeting the future stringent emission norms (especially soot particle emissions) while maintaining the same fuel economy. In this study, nanosize range soot particle emission characteristics of a stationary (non-road) diesel engine have been experimentally investigated. Experiments are conducted at a constant speed of 1500 rpm for three compression ratios and nozzle opening pressures at different engine loads. In-cylinder pressure history for 2000 consecutive engine cycles is recorded and averaged data is used for analysis of combustion characteristics. An electrical mobility-based fast particle sizer is used for analyzing particle size and mass distributions of engine exhaust particles at different test conditions. Soot particle distribution from 5 to 1000 nm was recorded. Results show that total particle concentration decreases with an increase in engine operating loads. Moreover, the addition of butanol in the diesel fuel leads to the reduction in soot particle concentration. Regression analysis was also conducted to derive a correlation between combustion parameters and particle number emissions for different compression ratios. Regression analysis shows a strong correlation between cylinder pressure-based combustion parameters and particle number emission.

     

Receptor modeling for source apportionment of polycyclic aromatic hydrocarbons in urban atmosphere

This study reports source apportionment of polycyclic aromatic hydrocarbons (PAHs) in particulate depositions on vegetation foliages near highway in the urban environment of Lucknow city (India) using the principal components analysis/absolute principal components scores (PCA/APCS) receptor modeling approach. The multivariate method enables identification of major PAHs sources along with their quantitative contributions with respect to individual PAH. The PCA identified three major sources of PAHs viz. combustion, vehicular emissions, and diesel based activities. The PCA/APCS receptor modeling approach revealed that the combustion sources (natural gas, wood, coal/coke, biomass) contributed 19–97% of various PAHs, vehicular emissions 0–70%, diesel based sources 0–81% and other miscellaneous sources 0–20% of different PAHs. The contributions of major pyrolytic and petrogenic sources to the total PAHs were 56 and 42%, respectively. Further, the combustion related sources contribute major fraction of the carcinogenic PAHs in the study area. High correlation coefficient (R ² > 0.75 for most PAHs) between the measured and predicted concentrations of PAHs suggests for the applicability of the PCA/APCS receptor modeling approach for estimation of source contribution to the PAHs in particulates.     

Microbial populations and enzyme activities in soil in situ under transgenic corn expressing cry proteins from Bacillus thuringiensis

Transgenic Bt crops produce insecticidal Cry proteins that are released to soil in plant residues, root exudates, and pollen and that may affect soil microorganisms. As a continuation of studies in the laboratory and a plant-growth room, a field study was conducted at the Rosemount Experiment Station of the University of Minnesota. Three Bt corn varieties that express the Cry1Ab protein, which is toxic to the European corn borer (Ostrinia nubilalis Hübner), and one Bt corn variety that expresses the Cry3Bb1 protein, which is toxic to the corn rootworm complex (Diabrotica spp.), and their near-isogenic non-Bt varieties were evaluated for their effects on microbial diversity by classical dilution plating and molecular (polymerase chain reaction-denaturing gradient gel electrophoresis) techniques and for the activities of some enzymes (arylsulfatases, acid and alkaline phosphatases, dehydrogenases, and proteases) involved in the degradation of plant biomass. After 4 consecutive years of corn cultivation (2003-2006), there were, in general, no consistent statistically significant differences in the numbers of different groups of microorganisms, the activities of the enzymes, and the pH between soils planted with Bt and non-Bt corn. Numbers and types of microorganisms and enzyme activities differed with season and with the varieties of corn, but these differences were not related to the presence of the Cry proteins in soil. The Cry1Ab protein of Bt corn (events Bt11 and MON810) was detected in most soils during the 4 yr, whereas the Cry3Bb1 protein was not detected in soils of Bt corn (event MON863) expressing the cry3Bb1 gene.     

Characteristics variation of coal combustion residues in an Indian ash pond.

Coal-fired power plants all over the world are cited as one of the major sources that generate huge quantities of coal combustion residues (CCRs) as solid wastes. Most frequently CCRs are collected through electrostatic precipitators, mixed with bottom ash by hydraulic systems and deposited in ash ponds. The quality of the CCRs at different locations in one of the ash ponds in Central India was evaluated to understand the variation in characteristics with a view to effective utilization. Results revealed that the presence of fine particles (< 50 mocrom) increased with increasing distance from the ash slurry inlet zone in the ash pond. Wide variations in the bulk density (800-980 kg m(-3)), porosity (45-57%) and water-holding capacity (57.5-75.7%) of CCRs were recorded. With increasing distance the pH of the CCRs decreased (from 9.0 to 8.2) and electrical conductivity increased (from 0.25 to 0.65 dS m(-3)). The presence of almost all the heavy metals in CCRs exhibited an increase with distance from the ash slurry discharge zone due to the increase in surface area (from 0.1038 to 2.3076 m2 g(-1)) of CCRs particles. The present paper describes the variation of characteristics of CCRs deposited in the ash pond and their potential applications.     

Vulnerability of Indian mustard (<Emphasis Type="Italic">Brassica juncea</Emphasis> (L.) Czernj. Cosson) to climate variability and future adaptation strategies

A simulation study has been carried out using the InfoCrop mustard model to assess the impact of climate change and adaptation gains and to delineate the vulnerable regions for mustard (Brassica juncea (L.) Czernj. Cosson) production in India. On an all India basis, climate change is projected to reduce mustard grain yield by ～2 % in 2020 (2010–2039), ～7.9 % in 2050 (2040–2069) and ～15 % in 2080 (2070–2099) climate scenarios of MIROC3.2.HI (a global climate model) and Providing Regional Climates for Impact Studies (PRECIS, a regional climate model) models, if no adaptation is followed. However, spatiotemporal variations exist for the magnitude of impacts. Yield is projected to reduce in regions with current mean seasonal temperature regimes above 25/10 °C during crop growth. Adapting to climate change through a combination of improved input efficiency, additional fertilizers and adjusting the sowing time of current varieties can increase yield by ～17 %. With improved varieties, yield can be enhanced by ～25 % in 2020 climate scenario. But, projected benefits may reduce thereafter. Development of short-duration varieties and improved crop husbandry becomes essential for sustaining mustard yield in future climates. As climatically suitable period for mustard cultivation may reduce in future, short-duration (<130 days) cultivars with 63 % pod filling period will become more adaptable. There is a need to look beyond the suggested adaptation strategy to minimize the yield reduction in net vulnerable regions.     

Response of antioxidants in sunflower (Helianthus annuus L.) grown on different amendments of tannery sludge: its metal accumulation potential

The interaction of metals present in tannery waste and their tolerance in the plants of sunflower (Helianthus annuus L.) was studied in the present paper under field conditions. Effects of 100% tannery sludge and various amendments of tannery sludge (10%, 25%, 35%, 50%, 75%) along with one set of control were studied on the physiological and biochemical parameters of the plant along with their metal accumulation potential after 30, 60 and 90 d after sowing. The plants of H. annuus were found effective in the accumulation of metals (Cr, Fe, Zn and Mn) in roots, shoots and leaves, however, the level of toxic metal, Cr was found below detection limit in the seeds of the plant. The oil was extracted from the seeds of the plant and the level of oil content was increased up to 35% tannery sludge as compared to control followed by decrease at higher tannery sludge ratio. An increase in the chlorophyll, protein, cysteine, non-protein thiol and sugar contents was observed at the lower amendment of tannery sludge at initial exposure periods followed by decrease than their respective controls. Malondialdehyde content in the roots and leaves was increased beyond 50% sludge amendments at all the exposure periods as compared to control. However, proline and ascorbic acid contents of the roots and leaves of the plant increased at all the exposure periods and sludge amendments, compared to their respective controls.     

Concentration and composition of atmospheric aerosols from the 1995 SEAVS experiment and a review of the closure between chemical and gravimetric measurements

We summarize the results from the various measurements and the inter-sampler comparisons from Southeastern Aerosol and Visibility Study (SEAVS), a study with one of its objectives to test for closure among chemical, gravimetric and optical measurements of atmospheric aerosol particles. Sulfate and organics are the dominant components of the SEAVS fine particles (nominally, particles with aerodynamic diameter < or = 2.5 microns) but between 28 and 42% (range over various samplers) of the gravimetrically measured total fine particle concentration is unidentified by the chemical measurements. Estimates of water associated with inorganic components and measurement imprecision do not totally explain the observed difference between gravimetric and chemical measurements. We examine the theoretical and empirical basis for assumptions commonly made in the published literature to extrapolate total fine particle concentration on the basis of chemical measurements of ions, carbon and elements. We then explore the more general question of closure using the SEAVS data as well as data from other, similar studies reported in the literature. In so combining the SEAVS measurements with other similar studies, we find a strong association between organic carbon and the unidentified component, that is, the fraction of the total fine particle concentration not identified by chemical measurements. We offer several tenable hypotheses for the relationship between the organic and unidentified components that deserve to be tested in future work. Specifically, we hypothesize that (1) errors in the sampling and analysis of organic carbon; (2) estimates of organic mass from measurements of organic carbon; and/or (3) water absorption by organics may all contribute to the observed relationship.