Discussion

Environmental and Ecological Statistics -     

Brazil's Electric Power Choices and Their Corresponding Carbon Emissions Implications

This study analyzes the options for meeting power demand in the Brazilianpower sector through the year 2015. Three policy cases are constructedto test economic and environmental policy measures against a baseline:advanced technologies scenario, environmental control scenario and carbon(C) elimination scenario. Least-cost modeling simulated these scenarios throughchanges in emissions fees and caps, costs for advanced technologies,demand side efficiency, and clean energy supplies. Results show that, in theabsence of alternative policies, new additions to Brazil's electric powersector will shift rapidly from hydroelectricity to combined-cycle natural gasplants. When the cost of environmental impacts are incorporated in theprice of power, the least-cost mix of electric power generation technologycould change in other ways. In all scenarios, energy efficiency andcogeneration play an important role in the least-cost power solution. Savingelectricity through increased efficiency offsets the needs for new supply andhas enormous potential in Brazil's industrial sector. Efficiency also reducesthe environmental burden associated with electricity production andtransmission, without compromising the quality of the services demandedby end users. Interesting enough, carbon dioxide (CO₂) emissions will remainrelatively low under almost every conceivable scenario.     

The influence of humic acids on the phytoextraction of cadmium from soil

Cadmium poses a major environmental and human health threat because of its constant release through anthropogenic activities. A need, therefore, exists for cost-effective remediation procedures. Phytoremediation, the use of plants to extract contaminants from soils and groundwater, has revealed great potential. However, it is limited by the fact that plants need time, nutrient supply and, moreover, have a limited metal uptake capacity. Synthetic chelators have shown positive effects in enhancing heavy metal extraction through phytoremediation, but they have also revealed a vast number of negative side-effects. The objective of this research was to investigate the use of humic acids as an alternative to synthetic chelators. Humic acids were applied to a cadmium-contaminated soil at various dosages, and the uptake of cadmium into Nicotiana tabacum SR-1 was determined in relation to the amounts of total and bioavailable cadmium in the soil. It was found that the theoretical bioavailability of cadmium, as determined by diethylenetriaminepentaacetic acid (DTPA) extraction, did not change, but its plant uptake was enhanced significantly, in some cases up to 65%. Humic acids added at a rate of 2 g kg(-1) soil increased the cadmium concentration in the shoots from 30.9 to 39.9 mg kg(-1). A possible reason for this enhancement is the decrease in pH, resulting in higher cadmium availability. Another possibility taken into account is that plants may take up cadmium complexes with humic acid fragments, which result from microbiological degradation or, self-dissociation.     

Mineralization,metabolism and formation of non-extractable residues of 14C-labelled organic contaminants during pilot-scale composting of municipal biowaste

Use of municipal biowaste for composting instead of its disposal has become a major source of concern as regards contamination by hazardous substances. To elucidate the hazard potential of compost application, municipal biowaste was amended with 14C-labelled model substances (pyrene, simazine) and incubated in a pilot-scale composting simulation system. A mass balance incorporating the mineralization, metabolism and sorption of the two model substances was established over a period of 370 days. The results are quite different for the two chemicals, reflecting their intrinsic properties: more than 60% of the applied 14C-simazine resulted in non-extractable residues (NER). Silylation experiments indicated that the formation of NER from simazine and its metabolites was due to both physical entrapment in the matrix and chemical binding. The mineralization and formation of NER represented the major pathways of disappearance for pyrene during one year of composting, accounting for 60 and 26% of initially applied 14C-activity, respectively. Mineralization occurred delayed after the thermophilic phase. As regards remobilization, release of pyrene from NER during composting could be excluded, whereas simazine, data were inconclusive in this respect.     

The environmental audit. II. Application to stream network design

The planning and execution of water quality management programs requires careful collection and analysis of data coupled with a systematic review and analysis of programmatic success. The environmental audit is a tool which facilitates improved water quality planning and management. This article demonstrates the utility of the environmental audit by reviewing portions of a comprehensive review of the water quality management program for the state of Idaho. The audit is a tool which forces careful design of a sampling program before data are collected. In the audit approach, program objectives are clearly stated prior to initiation of sampling. Stated objectives are also evaluated regularly to identify tension points, that is, conflicts between expectations and reality. In the example taken from Idaho, a management review team followed a directive to redesign the water quality monitoring program. We present a summary of the redesign as proposed by that team, to illustrate the results of a typical review of monitoring programs. That summary is followed by an example of how the proposed program would differ if the audit approach had been used. The two approaches offered both coincident and conflicting recommendations. Management review team and audit recommendations for lake sampling programs were similar even though a different process was used to develop the recommendations. The most striking contrast between the two results lies in the review team's approach to the problem. The directives followed, and the team's responses, concentrate on tools, such as increasing biological monitoring or reliance on monthly BWMP stations. In contrast, the audit results stress addressing management questions for which clear objectives have been stated, depending on specific tools only as needed to meet stated objectives. Although the audit does integrate externalities in its structure, it is little affected by economic or political influences. A major strength of the audit approach is its ability to provide defensible data for management decision making.     

Evaluation of the effect of small organic acids on phytoextraction of Cu and Pb from soil with tobacco Nicotiana tabacum

Phytoremediation, the use of plants to extract contaminants from soils and groundwater, is a promising approach for cleaning up soils contaminated with heavy metals. However its use is limited by the time required for plant growth, the nutrient supply and, moreover, by the limited metal uptake capacity. Synthetic chelators have shown positive effects in enhancing heavy metal extraction, but they have also revealed several negative side-effects. The objective of this study was to investigate the use of three natural low molecular weight organic acids (NLMWOA) (citric, oxalic, and tartaric acid) as an alternative to synthetic chelators. Slurry-, column-, toxicity- and phytoextraction experiments were performed. For the phytoextraction experiment the three NLMWOA were applied to a copper- and a lead-contaminated soil respectively. A significant increase in copper uptake was visible only in the citric acid treatment (67 mg kg-1) in comparison to the EDTA treatment (42 mg kg-1). The NLMWOA application showed no enhanced effect concerning the lead phytoextraction. A possible explanation for this lack of significance could be the rate of the degradation of NLMWOA. This rate might well be too high for these heavy metals with low mobility and bioavailability such as lead. The amounts of NLMWOA applied to the soil were very high (62.5 mmol kg-1 of soil) and the effect was too little. In this respect EDTA, which was applied in very small amounts (0.125 mmol kg-1) was more efficient. Thus making NLMWOA unsuitable to enhance phytoextraction of heavy metals from soil.     

Contamination of Clams with Human Norovirus and a Novel Hepatitis A Virus in Cameroon

Food and Environmental Virology - Shellfish constitute an important protein source but may be contaminated by viruses from various origins. A study performed on clams collected in Cameroon showed a...     

Threshold estimation from the linear dose-response model: Method and radiation data

The linear dose-response model is considered a conservative, nonthreshold relationship. This is based on a confusion between the sufficient condition (that is, zero slope at zero dose) and the necessary condition (that is, response distinguishable from zero). Once the threshold is properly defined, it is shown that the linear model predicts thresholds for radiation data in good agreement with experimental results.     

Indicators for sustainable energy development: Brazil's case study

This article summarizes the results of the project on indicators for sustainable energy development (ISED) in Brazil. The project's aim was to present energy related economic, social and environmental data to policy makers in a coherent and consistent form, showing interlinkages, time‐series and cross‐sectoral analyses and assess energy policy. Two priority areas assessed by these indicators, regarding the country's energy supply and demand, helped in the identification of a number of energy policy options that focused on specific aspects of the country's energy sector. On the supply side, these options include the development and stimulation of renewable energy, such as small‐scale hydroelectric, wind, solar photovoltaic power and bagasse cogeneration; stimulation of programmes for ethanol use as automotive fuel and sugarcane bagasse cogeneration; and implementation of natural gas‐fired, combined heat and power (CHP) plants. On the demand side, policy options include: the full implementation of the law on efficiency standards for appliances; expansion of utility investment in end‐use energy efficiency; adoption of targets and protocols to reduce energy intensity in the industrial sector; improvement of passenger transport efficiency; and the creation of a fund to improve energy affordability for the poor.