An LCA model for waste incineration enhanced with new technologies for metal recovery and application to the case of Switzerland

A process model of municipal solid waste incinerators (MSWIs) and new technologies for metal recovery from combustion residues was developed. The environmental impact is modeled as a function of waste composition as well as waste treatment and material recovery technologies. The model includes combustion with a grate incinerator, several flue gas treatment technologies, electricity and steam production from waste heat recovery, metal recovery from slag and fly ash, and landfilling of residues and can be tailored to specific plants and sites (software tools can be downloaded free of charge). Application of the model to Switzerland shows that the treatment of one tonne of municipal solid waste results on average in 425 kg CO₂-eq. generated in the incineration process, and 54 kg CO₂-eq. accrue in upstream processes such as waste transport and the production of operating materials. Downstream processes, i.e. residue disposal, generates 5 kg CO₂-eq. Savings from energy recovery are in the range of 67 to 752 kg CO₂-eq. depending on the assumptions regarding the substituted energy production, while the recovery of metals from slag and fly ash currently results in a net saving of approximately 35 kg CO₂-eq. A similar impact pattern is observed when assessing the MSWI model for aggregated environmental impacts (ReCiPe) and for non-renewable resource consumption (cumulative exergy demand), except that direct emissions have less and no relevance, respectively, on the total score. The study illustrates that MSWI plants can be an important element of industrial ecology as they provide waste disposal services and can help to close material and energetic cycles.     

Effect of orchard age on soil nitrogen transformation in subtropical China and implications

A better understanding of nitrogen transformation in soils could reveal the capacity for biological inorganic N supply and improve the efficiency of N fertilizers. In this study, a ¹⁵N tracing study was carried out to investigate the effects of converting woodland to orchard, and orchard age on the gross rates of N transformation occurring simultaneously in subtropical soils in Eastern China. The results showed that inorganic N supply rate was remained constant with soil organic C and N contents increased after converting woodland into citrus orchard and with increasing orchard age. This phenomenon was most probably due to the increase in the turnover time of recalcitrant organic-N, which increased with decreasing soil pH along with increasing orchard age significantly. The amoA gene copy numbers of both archaeal and bacterial were stimulated by orchard planting and increased with increasing orchard age. The nitrification capacity (defined as the ratio of gross rate of nitrification to total gross rate of mineralization) increased following the Michaelis–Menten equation, sharply in the first 10 years after woodland conversion to orchard, and increased continuously but much more slowly till 30 years. Due to the increase in nitrification capacity and unchanged NO₃⁻ consumption, the dominance of ammonium in inorganic N in woodland soil was shifted to nitrate dominance in orchard soils. These results indicated that the risk of NO₃⁻ loss was expected to increase and the amount of N needed from fertilizers for fruit growth did not change although soil organic N accumulated with orchard age.     

Recently planted vegetation strips reduce Giardia runoff reaching waterways

Current methods for tracking pathogens across farmland and into surrounding waterways via runoff are limited and typically have been developed using artificially created landscapes. No studies have investigated how Giardia in farm runoff moves across the landscape, despite high prevalence rates in dairy cattle (Bos taurus) worldwide. Here, we report the development of a field-based tracking method specific for Giardia movement in runoff and use this technique to compare the pathogen reduction capability of recently planted vegetation strips with bare soil strips cleared of vegetation. Such scenarios represent typical events in schemes to plant vegetation barriers aimed at reducing waterway contamination. A significant treatment effect was identified, with 26% fewer Giardia detected in runoff collected from the planted strip (P = 0.006). These results highlight the immediate benefit of pathogen removal to be gained from vegetation planting. The successful discrimination of treatment effects by this new technique will enable the assessment of different vegetation types on runoff reduction and the effects of plant development over time.     

Application and test of a simple tool for operational footprint evaluations

We present a user-friendly tool for footprint calculations of flux measurements in the surface layer. The calculations are based on the analytical footprint model by Kormann, R. and Meixner, F.X. [2001. An analytical footprint model for Non-neutral Stratification. Boundary-Layer Meteorology 99, 207-224]. The footprint density function of a flux sensor is determined using readily available data from standard eddy covariance measurements. This footprint density function is integrated over defined surface areas given as quadrangular polygons representing e.g. agricultural fields. We illustrate the use and performance of the tool by applying it to CO2 flux measurements with three eddy covariance system at the Swiss CarboEurope grassland site. Two flux towers were positioned in the centre of two neighbouring fields, respectively, that showed a very different CO2 flux during the study period. The third tower was located near the border of the two fields and was frequently influenced by both fields to a similar degree. The calculated footprint fractions were used to simulate the latter flux from the other two systems. The measured and simulated fluxes showed a good agreement and thus support the reliability of the footprint calculation. The presented simple footprint tool can be used as a routine quality check for flux monitoring stations influenced by surface areas with varying vegetation covers and/or land-use.     

Modelling of geochemical and isotopic changes in a column experiment for degradation of TCE by zero-valent iron

Zero-valent iron (ZVI) permeable-reactive barriers have become an increasingly used remediation option for the in situ removal of various organic and inorganic chemicals from contaminated groundwater. In the present study a process-based numerical model for the transport and reactions of chlorinated hydrocarbon in the presence of ZVI has been developed and applied to analyse a comprehensive data set from laboratory-scale flow-through experiments. The model formulation includes a reaction network for the individual sequential and/or parallel transformation of chlorinated hydrocarbons by ZVI, for the resulting geochemical changes such as mineral precipitation, and for the carbon isotope fractionation that occurs during each of the transformation reactions of the organic compounds. The isotopic fractionation was modelled by formulating separate reaction networks for lighter ((12)C) and heavier ((13)C) isotopes. The simulation of a column experiment involving the parallel degradation of TCE by hydrogenolysis and beta-elimination can conclusively reproduce the observed concentration profiles of all collected organic and inorganic data as well as the observed carbon isotope ratios of TCE and its daughter products.     

Environmental assessment of ester-based lubricants after application

GOAL, SCOPE AND BACKGROUND: Lubricants based on renewable resources are an environmentally friendly alternative to petrochemical products due to their better ecotoxicological performance and their excellent biodegradability. To improve the technical performance of lubricants, and to reduce friction and wear, the use of additives is nowadays obligatory. The collaborative research center SFB 442 aims at developing environmentally acceptable lubricants that facilitate the avoidance of these additives by transferring their function to suitable coatings. For a complete assessment of the ecological performance of these newly developed lubricants, the whole life cycle including production, application as well as disposal and fate in the environment is studied. In the following study the focus was on the application and its influence on the environmental behavior of the lubricant. The application of lubricants leads, among other things, to the intake of metals due to abrasion from tools, work pieces or mechanical components. Previous examinations indicated a possible influence of metals on the toxicity of eluates prepared from used lubricants (Erlenkaemper et al. 2005). To clarify if the apparent toxicity of used lubricants solely results from the intake of metals, the extractability of these metals from the oil matrix is determined. By combining chemical analyses with bioassays, the bioavailability of metals that are present in the extract is estimated. To further investigate the relevance of metals on toxicity, toxic units (TU) were calculated and related to the results of the bioassays. Interactions between the metals were investigated with aqueous mixtures of metal chlorides and calculations based on the concept of concentration addition and independent action. METHODS: A lubricant mixture was applied to a tribological test bench that simulates real conditions of use and extremely short time load, respectively. Samples were taken at particular times, water soluble fractions (WSF) of these fluids were prepared and dilution series were investigated in several bioassays. Concentration of metals and total organic carbon (TOC) were determined in the eluates. TUs were calculated according to Sprague (1970) and mixture toxicity was calculated according to the concept of concentration addition (Loewe and Muischnek 1926) and independent action (Bliss 1939). RESULTS: Analyses of the metal content of the lubricant and the eluates clearly revealed the availability of the metals in the aqueous extracts. Especially copper, zinc, nickel and chromium were found and their concentrations increased during the time of use. The water extractable fraction, e.g., of copper, rose from 8.8% to 45.3% of the total content in the lubricant after 33.5 hours of use. Tests performed with the algal growth inhibition assay and the luminescence inhibition assay revealed the uptake or absorption by the organisms and, thus, the bioavailability of the metals. The calculation of TUs partly indicated a possible influence of the metals on ecotoxicity of the eluates. Copper reached concentrations equal to or higher than the EC50 value of copper chloride in the growth inhibition assays with algae and Ps. putida as well in the immobilization assay with daphnids. TUs for copper are also larger than 1 for the algal growth inhibition assay. The EL50 values indicated that the luminescence inhibition assay was the most sensitive test system, with values between 4.7% and 9.6%. While the toxicity towards algae and V. fischeri in the growth inhibition assay decreased until both organisms were no longer influenced by the exposure, the EL50 values for the D. magna immobilization assay and the Ps. putida growth inhibition assay decreased with the progressing use of the lubricant. The tested metal salt mixtures showed that Ps. putida, algae and daphnids are the most sensitive organisms with EC50 values below 1 mg/l. DISCUSSION: Although the intake of metals mainly occurred via abrasion of particles, the results revealed the availability of these metals in water. The availability varied for each of the four metals. For both the algal growth inhibition assay and the luminescence inhibition assay, an uptake or absorption of the metals could be demonstrated. The calculated TUs indicated an effect in some bioassays that was not verified in the test itself. The influence of copper on V. fischeri, for example, was not confirmed while the EL50 values for the daphnid bioassay decreased, meaning that the eluates became more toxic with progressing use of the lubricant. The calculations of mixture toxicity based on the concept of concentration addition demonstrated good correlations with the tested metal mixtures, but also a different sensitivity of the organisms. CONCLUSIONS: The results presented here reveal the availability of those metals in water that were taken in during the use of the lubricant in a tribological test bench and, thus, have the possibility of interacting with the organisms. The availability of the metals in the bioassays was proven by chemical analyses. The calculation of TUs and the corresponding EL50 values, however, indicate different availabilities of the metals. The results of the metal salt mixtures show good correlations with calculations of mixture toxicity based on concentration addition. Moreover, the varying sensitivity of the organisms when exposed to eluates or metal mixtures indicates a different bioavailability of the metals and/or the presence of other compounds that exert toxic action. RECOMMENDATIONS AND PERSPECTIVES: For further investigations, the organic oil matrix and its influence on the toxicity have to be taken into account. The toxicity of the eluates may not only be due to metals; additional effects could arise from changes in the lubricant itself.     

Groundwater Flow Model Calibration of a Coastal Multilayer Aquifer System Based on Statistical Sensitivity Analysis

Environmental Modeling & Assessment - The identification of the hydrological processes taking place at coastal systems and the interaction between aquifers and the sea have been key features...     

Climate change mitigation in Austria and Switzerland: The pitfalls of federalism in greening decentralized building policies

The present paper analyses and compares how federalism in Austria and Switzerland affected climate change mitigation in the fully decentralized building sectors of the two countries during the Kyoto Period (1990–2012). This is of interest because the environmental significance of federal political systems is still contested. We first review the literature on federalism in the context of environmental and climate policymaking, and we show that the effects of federal political systems can be positive or negative (depending on interactions between politics and problem characteristics). We then summarize the two qualitative country studies. By analysing who initiated and coordinated respective policies at what time and why, we show that respective policy changes neither emerged bottom-up nor diffused between provinces/cantons, although the latter are fully responsible for building policies. While most policy changes were triggered by federal and/or European Union interventions, the provinces/cantons usually delayed and/or watered down policy changes to smallest common denominator solutions. Based on these findings we conclude that the building sectors of the two countries became more efficient despite, not because of federalism. Against this background we recommend centralizing building policies, or to engage sub-national actors in national target-setting early on.     

Design and field application of an automated cartridge sampler for VOC concentration and flux measurements

One of the major limitations in advancing the understanding of tropospheric ozone and aerosol generation and developing strategies for their control is the technical ability to accurately measure volatile organic compounds (VOCs). This paper describes the design of a constant flow VOC sampler. The versatile sampler can be used for fully automated concentration and flux measurements of VOCs. The sampler incorporates a microprocessor control unit and provides highly accurate mass flow control and significant ease of operation. Sampling sequences can be programmed directly or by remote control through a PC. All important operational parameters necessary for a complete sampling audit trail are logged. Compact weatherproof housings and low power consumption allow operation at remote sites and locations which are sensitive to disturbances or have restricted access. Inner wetted surfaces of the sampler are constructed from non-contaminating materials that do not sorb or emit VOC, and thus permit the collection of representative samples even in environments with very low VOC concentrations. The cartridge magazine provides a maximum of 20 sequential cartridge samples, which allows for long-term air quality assessments. In the dual channel mode, two samples can be collected simultaneously through two independent sample loops, providing ten sequential sample pairs. This design allows the parallel collection of (a) quality assurance backup samples, (b) samples on two different types of cartridges/sorbents to allow a variety of analyses, or (c) differential samples for flux measurements using enclosure, aerodynamic profile, or relaxed eddy accumulation (REA) methods. Field applications including airplane profile measurements above a tropical rainforest area, as well as gradient and REA measurements over a mid-latitude mixed forest stand are described, and demonstrate the validity and flexibility of the system. In particular, the application of the VOC sampler as an integrated part of a REA system is emphasized.