Physicochemical and biological characterisation of different dredged sediment deposit sites in France

The aim of this work is to determine sediment properties, metal contents and transfers of Cd and Zn from dredged sediments to plants. To this end 10 deposit sites with different contexts were visited in France. The main agronomic characteristics and metal contents for surface soil layers were measured, the plant species present at the sites, such as Brassicaceae and Fabaceae, were listed, and the distribution of their root systems described. Soil characteristics such as available P (Olsen) varied between sites, with values ranging from 0.01 to 0.49 g kg(-1). Total contents and enrichment factors were studied, highlighting metal contamination in most of the sites. Despite carrying out principal component analyses, it was not possible to group deposits by age or geographical localisation. However, deposits could be distinguished as a function of proximity of industrial facilities, sediment grain size and carbonate content. Associations between metals were also highlighted: (1) Cd, Pb and Zn, and (2) Al, Cr, Cu and Fe. Consequently, we propose classifying them as technogenic anthrosols.     

An evaluation of indoor and outdoor biological particulate matter

The incidences of allergies, allergic diseases and asthma are increasing world wide. Global climate change is likely to impact plants and animals, as well as microorganisms. The World Health Organization, U.S. Environmental Protection Agency, U.S. Department of Agriculture, U.S. Department of Health and Human Services, and the Intergovernmental Panel on Climate Change cite increased allergic reactions due to climate change as a growing concern. Monitoring of indoor and ambient particulate matter (PM) and the characterization of the content for biological aerosol concentrations has not been extensively performed. Samples from urban and rural North Carolina (NC), and Denver (CO), were collected and analyzed as the goal of this research. A study of PM₁₀ (<10 μm in aerodynamic diameter) and PM_2.5 (<2.5 μm in aerodynamic diameter) fractions of ambient bioaerosols was undertaken for a six month period to evaluate the potential for long-term concentrations. These airborne bioaerosols can induce irritational, allergic, infectious, and chemical responses in exposed individuals. Three separate sites were monitored, samples were collected and analyzed for mass and biological content (endotoxins, (1,3)-β-d-glucan and protein). Concentrations of these bioaerosols were reported as a function of PM size fraction, mass and volume of air sampled. The results indicated that higher concentrations of biologicals were present in PM₁₀ than were present in PM_2.5, except when near-roadway conditions existed. This study provides the characterization of ambient bioaerosol concentrations in a variety of areas and conditions.     

Advanced rescue techniques: lessons learned from the collapse of a building in Nairobi, Kenya

This paper examines the collapse of a five-storey building in Nairobi, Kenya, on 23 January 2006. It draws on reports from local authorities and on debriefings by Israel's Home Front Command (HFC), including information on injury distribution, rescue techniques, and the mode of operation. Most of the 117 people found under the structure were evacuated on the first day to a public hospital, which was overwhelmed by the incident. HFC forces arrived 23 hours after the disaster. At that stage, two people were still buried under the building and special techniques (tunnelling and scalping) were required to secure their evacuation. The two people quickly recovered after a short stay in hospital. Local technology is the preferred option during such events because time is crucial. International cooperation is required when this technology is not available. All of the hospitals in the disaster area, including private facilities, should participate in treating casualties.     

Co-cropping for phyto-separation of zinc and potassium from sewage sludge

The use of sewage sludge as a fertilizer and soil amendment has resulted in high concentrations of heavy metals in the soil limiting its use. The present study was carried out to find the possibility of phyto-separating toxic and beneficial elements from the sludge using suitable plants. Of the five plants tested the hyperaccumulator Sedum alfredii H achieved the greatest removal of Zn, while shoots of Alocasia marorrhiza accumulated high content of K. Co-cropping these two plants on the sludge verified the previous observations on A. marorrhiza and the shoots of this plant could accumulate more than 120 g K kg(-1) dry matter in the median growth stage. Zn hyperaccumulated in Sedum's shoots to an extent more than 10 g kg(-1) dry matter; K concentrated five to ten times in the Alocasia's shoots which could be used as a good organic-K-fertilizer. Hence, the two elements were simultaneously phytoseparated and could be recycled. Furthermore, cultivation of plants in the sludge resulted in significant decreases in total Zn but kept the favorable agronomic characteristics of the sludge material, such as pH, organic matter content, and NPK concentrations and ameliorated its biological stability. These results suggest that simultaneous phyto-separation of toxic and beneficial elements from sewage sludge are possible by co-cropping using specific plants without the input of any chemicals.     

Automated Algorithms for Heuristic Base‐Flow Separation1

Abstract: The subjective nature of graphical base‐flow separation combined with the many applications of base‐flow time series derived from continuous streamflow data, motivates the development and application of automated algorithms for heuristic base‐flow separation. Base‐flow time series derived from gauged streamflow support diverse applications in engineering hydrology, catchment analysis, hydrogeologic investigations, regional low‐flow analysis, and recharge estimation. Whether based on graphical procedures for recession analysis or analytical expressions derived from fundamental equations of ground‐water flow, the variety of base‐flow separation algorithms belies the array of base‐flow definitions and interpretations that variously refer to dominant process, source, flow path, and characteristic response time. Algorithms that are invariant in their consistent – though heuristic – characterization of base‐flow response are particularly useful for interbasin comparisons of low‐flow characteristics and hydrologic regionalization. More adaptable algorithms provide application‐specific flexibility in allocating flow components like interflow to either quickflow or slowflow. Four widely used algorithms that produce consistent base‐flow time series using only gauged streamflow records are compared and contrasted with a complementary heuristic algorithm that incorporates hydrologic judgment explicitly, through manual parameterization. The utility of these inherently subjective algorithms is illustrated through a simple example of flow phase separation in a two‐component end‐member mixing model of dissolved chlorides in the Cuyahoga River.     

Comparison of an enzyme-linked immunosorbent assay (ELISA) to gas chromatography (GC)--measurement of polychlorinated biphenyls (PCBs) in selected US fish extracts

The analysis of PCBs in fish tissues by immunoassay methods was evaluated using fish collected from a US monitoring program, the National Contaminant Biomonitoring Program of the US Department of Interior, Fish and Wildlife Service. Selected composite whole fish samples, which represented widely varying concentrations and sources of PCBs, were extracted and subjected to congener PCB analysis by gas chromatography (GC) and total PCB analysis using an ELISA (ePCBs) calibrated against technical Aroclor 1248. PCB congener patterns in these fishes were different from the patterns found in commercial Aroclors or their combinations as demonstrated by principal component analysis of normalized GC congener data. The sum of the PCB congeners measured by GC (total-PCBs) ranged from 37 to 4600 ng/g (wet weight). Concentrations of PCBs as determined by the ELISA method were positively correlated with total-PCBs and the ePCBs/total-PCBs ratios for individual samples ranged from 1 to 6. Ratios of ePCBs/total-PCBs for dilutions of Aroclors 1242, 1254, and 1260 and for matrix spikes range from 0.6 for 1242 to 2.5 for 1254 and 1260. These results suggest that higher chlorinated PCB congeners have higher affinity for the anti-PCB antibodies. Partial least squares with latent variable analysis of GC and ELISA data of selected Aroclors and fish samples also support the conclusion that ELISA derived PCB concentrations are dependent on the degree of chlorination.     

Acid neutralization within limestone sand reactors receiving coal mine drainage

Pulsed bed treatment of acid mine drainage (AMD) uses CO2 to accelerate limestone dissolution and intermittent fluidization to abrade and carry away metal hydrolysis products. Tests conducted with a prototype of 60 L/min capacity showed effective removal of H+ acidity over the range 196-584 mg/L (CaCO3) while concurrently generating surplus acid neutralization capacity. Effluent alkalinity (mg/L CaCO3) rose with increases in CO2 (DC, mg/L) according to the model Alkalinity=31.22+2.97(DC)0.5, where DC was varied from 11-726 mg/L. Altering fluidization and contraction periods from 30s/30s to 10s/50s did not influence alkalinity but did increase energy dissipation and bed expansion ratios. Field trials with three AMD sources demonstrated the process is capable of raising AMD pH above that required for hydrolysis and precipitation of Fe3+ and Al3+ but not Fe2+ and Mn2+. Numerical modeling showed CO2 requirements are reduced as AMD acidity increases and when DC is recycled from system effluent.     

Controlled-release system for the insect growth regulator cyromazine

An encapsulation system designed to give long-lasting effectiveness of the insect growth regulator (IGR) cyromazine (Neporex) against Culex pipiens (Culicidae) mosquito larvae was developed. The main thrust of the research was to develop a simple method for preparing controlled-release formulations by means of an extrusion technique in combination with a supplementary coating and to study the release characteristics and effectiveness of the formulations. A series of formulations were prepared with low-density polyethylene (LDPE 600) for the matrix and with polyurea or one of four types of polyurethane for the coating. The rate of release of the active material from the controlled-release formulations was determined in an in vitro dissolution system. The biological activity of the controlled-release formulations was tested in vivo against C. pipiens larvae.