Bioaccumulation surveillance in Milford Haven Waterway

Biomonitoring of contaminants (metals, organotins, polyaromatic hydrocarbons (PAHs), PCBs) was undertaken in Milford Haven Waterway (MHW) and a reference site in the Tywi Estuary (St Ishmael/Ferryside) during 2007–2008. Bioindicator species encompassed various uptake routes—Fucus vesiculosus (dissolved contaminants); Littorina littorea (grazer); Mytilus edulis and Cerastoderma edule (suspension feeders); and Hediste (=Nereis) diversicolor (sediments). Differences in feeding and habitat preference have subtle implications for bioaccumulation trends though, with few exceptions, contaminant burdens in MHW were higher than the Tywi reference site, reflecting inputs. Elevated metal concentrations were observed at some MHW sites, whilst As and Se (molluscs and seaweed) were consistently at the higher end of the UK range. However, for most metals, distributions in MH biota were not exceptional. Several metal-species combinations indicated increases in bioavailability upstream, which may reflect the influence of geogenic/land-based sources—perhaps enhanced by lower salinity. TBT levels in MH mussels were below OSPAR toxicity thresholds and in the Tywi were close to zero. Phenyltins were not accumulated appreciably in M. edulis, whereas some H. diversicolor populations appear subjected to localized (historical) sources. PAHs in H. diversicolor were distributed evenly across most of MHW, although acenaphthene, fluoranthene, pyrene, benzo(a)anthracene and chrysene were highest at one site near the mouth; naphthalenes in H. diversicolor were enriched in the mid-upper Haven (a pattern seen in M. edulis for most PAHs). Whilst PAH (and PCB) concentrations in MH mussels were mostly above reference and OSPAR backgrounds, they are unlikely to exceed ecotoxicological thresholds. Bivalve Condition indices (CI) were highest at the Tywi reference site and at the seaward end of MH, decreasing upstream—giving rise to several significant (negative) relationships between CI and body burdens. Despite the possible influence of salinity gradient as a complicating factor, multivariate analysis indicated that a combination of contaminants could influence the pattern in condition (and the biomarkers metallothionein and TOSC). Integrating bioaccumulation data with biological and biochemical endpoints is seen as a useful way to discriminate environmental quality of moderately contaminated areas such as MHW and to prioritise cause and effect investigations.     

Assessment of Spatiotemporal Varying Relationships Between Rainfall,Land Cover and Surface Water Area Using Geographically Weighted Regression

Traditional regression techniques such as ordinary least squares (OLS) are often unable to accurately model spatially varying data and may ignore or hide local variations in model coefficients. A relatively new technique, geographically weighted regression (GWR) has been shown to greatly improve model performance compared to OLS in terms of higher R ² and lower corrected Akaike information criterion (AIC_C). GWR models have the potential to improve reliabilities of the identified relationships by reducing spatial autocorrelations and by accounting for local variations and spatial non-stationarity between dependent and independent variables. In this study, GWR was used to examine the relationship between land cover, rainfall and surface water habitat in 149 sub-catchments in a predominately agricultural region covering 2.6 million ha in southeast Australia. The application of the GWR models revealed that the relationships between land cover, rainfall and surface water habitat display significant spatial non-stationarity. GWR showed improvements over analogous OLS models in terms of higher R ² and lower AIC_C. The increased explanatory power of GWR was confirmed by the results of an approximate likelihood ratio test, which showed statistically significant improvements over analogous OLS models. The models suggest that the amount of surface water area in the landscape is related to anthropogenic drainage practices enhancing runoff to facilitate intensive agriculture and increased plantation forestry. However, with some key variables not present in our analysis, the strength of this relationship could not be qualified. GWR techniques have the potential to serve as a useful tool for environmental research and management across a broad range of scales for the investigation of spatially varying relationships.     

Measurement of the proximity effect for indoor air pollutant sources in two homes

Personal exposure to air pollutants can be substantially higher in close proximity to an active source due to non-instantaneous mixing of emissions. The research presented in this paper quantifies this proximity effect for a non-buoyant source in 2 naturally ventilated homes in Northern California (CA), assessing its spatial and temporal variation and the influence of factors such as ventilation rate on its magnitude. To quantify how proximity to residential sources of indoor air pollutants affects human exposure, we performed 16 separate monitoring experiments in the living rooms of two detached single-family homes. CO (as a tracer gas) was released from a point source in the center of the room at a controlled emission rate for 5-12 h per experiment, while an array of 30-37 real-time monitors simultaneously measured CO concentrations with 15 s time resolution at radial distances ranging from 0.25-5 m under a range of ventilation conditions. Concentrations measured in close proximity (within 1 m) to the source were highly variable, with 5 min averages that typically varied by >100-fold. This variability was due to short-duration (<1 min) pollutant concentration peaks ("microplumes") that were frequently recorded in close proximity to the source. We decomposed the random microplume component from the total concentrations by subtracting predicted concentrations that assumed uniform, instantaneous mixing within the room and found that these microplumes can be modeled using a 3-parameter lognormal distribution. Average concentrations measured within 0.25 m of the source were 6-20 times as high as the predicted well-mixed concentrations.     

Preparation, certification and interlaboratory analysis of workplace air filters spiked with high-fired beryllium oxide

Occupational sampling and analysis for multiple elements is generally approached using various approved methods from authoritative government sources such as the National Institute for Occupational Safety and Health (NIOSH), the Occupational Safety and Health Administration (OSHA) and the Environmental Protection Agency (EPA), as well as consensus standards bodies such as ASTM International. The constituents of a sample can exist as unidentified compounds requiring sample preparation to be chosen appropriately, as in the case of beryllium in the form of beryllium oxide (BeO). An interlaboratory study was performed to collect analytical data from volunteer laboratories to examine the effectiveness of methods currently in use for preparation and analysis of samples containing calcined BeO powder. NIST SRM(?) 1877 high-fired BeO powder (1100 to 1200 °C calcining temperature; count median primary particle diameter 0.12 μm) was used to spike air filter media as a representative form of beryllium particulate matter present in workplace sampling that is known to be resistant to dissolution. The BeO powder standard reference material was gravimetrically prepared in a suspension and deposited onto 37 mm mixed cellulose ester air filters at five different levels between 0.5 μg and 25 μg of Be (as BeO). Sample sets consisting of five BeO-spiked filters (in duplicate) and two blank filters, for a total of twelve unique air filter samples per set, were submitted as blind samples to each of 27 participating laboratories. Participants were instructed to follow their current process for sample preparation and utilize their normal analytical methods for processing samples containing substances of this nature. Laboratories using more than one sample preparation and analysis method were provided with more than one sample set. Results from 34 data sets ultimately received from the 27 volunteer laboratories were subjected to applicable statistical analyses. The observed performance data show that sample preparations using nitric acid alone, or combinations of nitric and hydrochloric acids, are not effective for complete extraction of Be from the SRM 1877 refractory BeO particulate matter spiked on air filters; but that effective recovery can be achieved by using sample preparation procedures utilizing either sulfuric or hydrofluoric acid, or by using methodologies involving ammonium bifluoride with heating. Laboratories responsible for quantitative determination of Be in workplace samples that may contain high-fired BeO should use quality assurance schemes that include BeO-spiked sampling media, rather than solely media spiked with soluble Be compounds, and should ensure that methods capable of quantitative digestion of Be from the actual material present are used.     

Projected Years Lost due to Disabilities (YLDs) for bacillary dysentery related to increased temperature in temperate and subtropical cities of China

The impact of climate change on enteric infection has been a concern in recent years. This study aims to project disability burdens of bacillary dysentery (BD) associated with increasing temperature in different climatic zones in China. Years Lost due to Disabilities (YLDs) were used as the measure of burden of bacillary dysentery in this study. A temperate city in northern China and a subtropical city in southern China were selected as the study areas. The quantitative relationship between temperature and the number of cases in each city was base on the regression models developed in our previous studies. YLDs for bacillary dysentery in 2000 were used as the baseline data. Projection of YLDs for bacillary dysentery in 2020 and 2050 under future temperature scenarios were conducted. Demographic changes over the next 20 to 50 years in study cities were considered in the projections. Under the temperature scenarios alone, the YLDs for bacillary dysentery may increase by up to 80% by 2020 and 174% by 2050 in the temperate city and up to 75% increase in the YLDs by 2020 and a 147% increase by 2050 in the tropical city. Considering potential changes in both temperature and population size and structure, if other factors remain constant, compared with the YLDs observed in 2000, the YLDs for bacillary dysentery may double by 2020 and triple by 2050 in both the temperate and subtropical cities in China. The temperature-related health burden of enteric infection in China may greatly increase in the future if there is no effective intervention. Relevant public health strategies should be developed at an earlier stage to prevent and reduce the impact of infectious disease associated with climate change.     

How Do River Nitrate Concentrations Respond to Changes in Land-use? A Modelling Case Study of Headwaters in the River Derwent Catchment,North Yorkshire,UK

A combined semi-distributed hydrological model (CASCADE/QUESTOR) is used to evaluate the steady-state that may be achieved after changes in land-use or management and to explore what additional factors need to be considered in representing catchment processes. Two rural headwater catchments of the River Derwent (North Yorkshire, UK) were studied where significant change in land-use occurred in the 1990s and the early 2000s. Much larger increases in mean nitrate concentration (55%) were observed in the catchment with significant groundwater influence (Pickering Beck) compared with the surface water-dominated catchment (13% increase). The increases in Pickering Beck were considerably greater than could be explained by the model in terms of land-use change. Consequently, the study serves to focus attention on the long-term increases in nitrate concentration reported in major UK aquifers and the ongoing and chronic impact this trend is likely to be having on surface water concentrations. For river environments, where groundwater is a source, such trends will mask the impact of measures proposed to reduce the risk of nitrate leaching from agricultural land. Model estimates of within-channel losses account for 15–40% of nitrate entering rivers.     

The effect of changes in land use on nitrate concentration in water supply wells in southern Chester County, Pennsylvania

An analysis of private potable water well data was conducted for seven single family residential developments in southern Chester County, Pennsylvania. Background data were available for 165 wells within the communities when the wells were first drilled in the 1980s and early 1990s. Sampling of 75 wells within these same communities was performed in 2006 to determine whether conversion of the land to residential housing along with the use of conventional on-lot septic systems had resulted in elevated concentration of nitrate-nitrogen in the drinking water aquifer. The data indicate that prior land use influenced the occurrence of nitrate-nitrogen in the drinking water aquifer. The median nitrate-nitrogen concentration for the 165 wells in the background dataset was 2.9 mg/L. One hundred-seven of those wells were drilled on land previously used for active agricultural purposes. The median nitrate concentration in these wells was 3.8 mg/L. Of 48 wells drilled on forested land, the median nitrate concentration was 1.1 mg/L, approximately 3.5 times lower than those drilled on active agricultural land. The median nitrate concentration in the 2006 sampling dataset was 3.6 mg/L, an increase of 0.7 mg/L. The data indicate that conversion of the land has not resulted in contamination of the drinking water aquifer with respect to nitrate-nitrogen. Likewise, the data suggest that the conversion has not resulted in significant improvements to overall water quality.     

Calibration and validation of a regionally and seasonally stratified macroinvertebrate index for West Virginia wadeable streams

Multimetric indices (MMIs) are routinely used by federal, state, and tribal entities to assess the quality of aquatic resources. Because of their diversity, abundance, ubiquity, and sensitivity to environmental stress, benthic macroinvertebrates are well suited for MMIs. West Virginia has used a statewide family-level stream condition index (WVSCI) since 2002. We describe the development, validation, and application of a geographically- and seasonally partitioned genus-level index of most probable stream status (GLIMPSS) for West Virginia wadeable streams. Natural classification strata were evaluated with reference site communities using mean similarity analysis and non-metric multidimensional scaling ordination. Forty-one metrics spanning six ecological categories (richness, composition, tolerance, dominance, trophic groups, and habits) were evaluated for sensitivity, responsiveness, redundancy, range and variability across seasonal (spring and summer) and regional (mountains and plateau) strata. Through a step-wise metric selection process, 8–10 metrics were aggregated to comprise four stratum-specific GLIMPSS models (mountain/plateau and spring/summer). A comparison of GLIMPSS with WVSCI exhibited marked improvements where GLIMPSS detecting greater stream impacts. A variation of the GLIMPSS, which differs only in the family-level taxonomic identification of Chironomidae (GLIMPSS (CF)), was comparable to the full GLIMPSS. These MMIs are robust yet practical tools for evaluating impacts to water quality, instream and riparian habitat, and aquatic wildlife in wadeable riffle-run streams based on sensitivity, responsiveness, precision, and independent validation. These models may be used effectively to detect degradation of the naturally occurring benthic community, assess causes of biological degradation, and plan and evaluate remediation of damaged stream ecosystems.     

Long-term dispersion and availability of metals from submarine mine tailing disposal in a fjord in Arctic Norway

Mining of Cu took place in Kvalsund in the Arctic part of Norway in the 1970s, and mine tailings were discharged to the inner part of the fjord, Repparfjorden. Metal speciation analysis was used to assess the historical dispersion of metals as well as their potential bioavailability from the area of the mine tailing disposal. It was revealed that the dispersion of Ba, Cr, Ni, Pb and Zn from the mine tailings has been limited. Dispersion of Cu to the outer fjord has, however, occurred; the amounts released and dispersed from the mine tailing disposal area quantified to be 2.5–10 t, less than 5% of Cu in the original mine tailings. An estimated 80–390 t of Cu still remains in the disposal area from the surface to a depth of 16 cm. Metal partitioning showed that 56–95% of the Cu is bound in the potential bioavailable fractions (exchangeable, reducible and oxidisable) of the sediments, totalling approximately 70–340 t, with potential for continuous release to the pore water and re-precipitation in over- and underlying sediments. Surface sediments in the deposit area were affected by elevated Cu concentrations just above the probable effect level according to the Norwegian sediment quality criteria, with 50–80% Cu bound in the exchangeable, reducible and oxidisable fractions, potentially available for release to the water column and/or for uptake in benthic organisms.     

Aerobic treatment of swine manure to enhance anaerobic digestion and microalgal cultivation

Aerobic treatment of swine manure was coupled with anaerobic digestion and microalgal cultivation. A 14-day aerobic treatment reduced the total solid content of swine manure by >15%. Ammonia and carbon dioxide were stripped by the air supplied, and this off-gas was further used to aerate the culture of Chlorella vulgaris. The microalgal growth rates in Bristol medium and the wastewater with the off-gas increased from 0.08 to 0.22 g/L/d and from 0.15 to 0.24 g/L/d, respectively. Meanwhile, the aerobically treated swine manure showed a higher methane yield during anaerobic digestion. The experimental results were used to establish a demonstration unit consisting of a 100 L composter, a 200 L anaerobic digester, a 60 L tubular photobioreactor, and a 300 L micro-open raceway pond.