Use of O2 consumption and CO2 production in kinetic cells to delineate pyrite oxidation-carbonate buffering and microbial respiration in unsaturated media

Identifying zones of sulphide oxidation and carbonate buffering is important in the development of a management plan for mine waste-rock piles. In this study, we used a kinetic cell technique to measure rates of O2 consumption and CO2 production in low sulphide (<0.12 wt.% S), low inorganic carbon (<0.20 wt.% C(inorganic)), gneissic waste rock and associated organic-rich lake sediment (0.7 wt.% C(organic)), and forest soil (1.4 wt.% C(organic)) collected from the Key Lake uranium mine in Saskatchewan, Canada. Solid chemistry, stable carbon isotope, pore water sulphate concentration data, and stoichiometric considerations indicated that O2 consumption and CO2 production were constrained by microbial respiration in the lake sediment and forest soil and by pyrite oxidation-carbonate buffering in the gneissic waste rock. Mean ratios of molar CO2 production to O2 consumption rates were 0.5 for lake sediment, 0.7 for forest soil, and 0.2 for gneissic waste rock. The different O2/CO2 ratios suggested that O2-CO2 monitoring may provide a practical tool for identifying the zones of microbial respiration and pyrite oxidation-carbonate buffering in mine waste-rock piles. Rates of O2 consumption and CO2 production were about one order of magnitude greater in lake sediment than in gneissic waste rock, indicating that microbial respiration would exert a control on the distribution of O2 and CO2 gas in waste-rock piles constructed upon the dewatered lake sediments.     

The digestibility of waste activated sludges.

Laboratory digestion studies using waste activated sludges (WAS) were conducted to compare the digestion performance between anaerobic and aerobic processes. Nine samples of WAS from seven wastewater treatment plants were collected and batch-digested under both anaerobic and aerobic conditions for 30 days at 25 degrees C. The cation content of wastewater (both floc and solution phases) and solution biopolymer (protein and polysaccharide) was measured before and after digestion and compared with volatile solids destruction data. The study revealed that each digestion process was associated with a distinct biopolymer fraction, which accounted for differences in volatile solids reduction under anaerobic and aerobic conditions. The anaerobic digestion data showed strong correlations between soluble protein generation, ammonium production, percent volatile solids reduction, and floc iron (Fe). These data suggest that the amount of volatile solids destroyed by anaerobic digestion depends on the Fe content of floc. In aerobic digestion, polysaccharide accumulated in solution along with calcium and magnesium. For aerobic digestion, correlations between divalent cation release and the production of inorganic nitrogen were found. This implies that divalent cation-bound biopolymer, thought to be lectin-like protein, was the primary organic fraction degraded under aerobic conditions. The results of the study show that the cation content in wastewater is an important indicator of the material that will digest under anaerobic or aerobic conditions and that some of the volatile solids will digest only under either anaerobic or aerobic conditions.     

Simulation of 1-year-old Populus tremuloides response to ozone stress at Ithaca, USA, and Suwon, Republic of Korea

The growth of 1-year-old aspen was simulated using TREGRO, a computer simulation model of individual tree growth, to assess potential effects of ozone (O3). TREGRO was parameterized using information from a field experiment conducted at Ithaca, NY, USA; the model was then applied using environmental information from Suwon, Korea, where O3 exposures of aspen had not been conducted. In the parameterization at Ithaca, the simulated and measured total biomass differed by about 3% and the differences between measured and simulated biomass gain of leaf, shoot, and root were 15.4, 8.3, and 4.4%, respectively. Simulating growth at Suwon required adjustment in growth rates to match measured growth due to the different weather conditions at the two cities. The assimilated carbon was evenly distributed to each tissue (foliage, branch, stem, coarse, fine roots) in Suwon, whereas it was mainly allocated to vigorous stem growth in Ithaca. The vigorous growth under Suwon conditions resulted in less total non-structural carbon and perhaps trees more vulnerable to O3 stress. Although the ambient O3 in Suwon (1.2 ppm.h of sum of the hourly concentrations greater than 0.06 ppm [SUM06]) was lower than that in Ithaca (2.1 ppm.h of SUM06), a reduction of 8% of total assimilated carbon was found compared to simulation without O3. Severe effects on root growth at elevated O3 (1.7 times ambient) were predicted; however, the effects on leaf growth would not be as severe.     

Documentation of selected constructs and parameter values in the aquatic model cleaner

Process representations critical to the phytoplankton and zooplankton submodels are described. These include constructs for: light- and nutrient-limitations and their interaction, temperature, consumption, and population-age structure. Values for key parameters are documented with reference to the literature on aquatic ecology and ecological modelling. Time-course relationships of the processes affecting the phytoplankton, zooplankton, phosphorus and nitrogen compartments are presented and discussed. These serve as additional documentation and are an important result of modelling synthesis.     

Ultra-low concentration of total organic carbon in ultrapure water using ion-exchange resin embedding silanized magnetic nanoparticles

Regeneration of pure water is an important issue not only for the healthy life but also for the fine control of precise processes in various industries.One important issue in ultrahigh purified water is to reduce the amount of total organic carbon(TOC).Herein,we introduce a new approach to reduce the TOC using the surface silanized nanoparticles,in which the magnetic nanoparticles(mNPs) are silanized and then complexed with ion exchange resin(IER) beads.The Fe_3O_4 mNPs are surface modified by using high concentrated vinyltrimethoxysilane(VTMS) and then adhered on the surface of IER beads.The surface modified mNPs have a thick-shell of polysiloxane layer varying from 5 to 22 nm depending on the amount of VTMS used,which leads the significant increase of specific surface area.The IER beads embedding VTMS-silanized mNPs achieves about 7 μg/L of the TOC level in ultrapure water system,which is two orders less than 228 μg/L of the feeding water and one order less than 96 μg/L from the system using pristine IER beads.This result is mainly attributed to the polysiloxane layer forming broccoli-like surface structure and some part by the vinyl group of VTMS exposed to the amines in the water.     

The Optimization of Methods for the Collection of Aerosolized Murine Norovirus

Globally, norovirus is the most common gastroenteritis causing pathogen. Annually, norovirus causes 685 million cases of acute gastroenteritis and 200,000     

Effects of Asian dust events on atmospheric bacterial communities at different distances downwind of the source region

Aeolian dust particles arising from arid and semiarid zones are known to carry microbes by air currents. The effect of wind-borne bacteria on atmospheric bacterial population at various downwind distances from the dust source regions must be clarified, but has not yet been reported. This study monitored the bacterial abundance and community composition in outdoor aerosol samples in Beijing, China, which is close to the Asian dust source regions, and compared them with the results obtained in a distant region(Osaka, Japan).The Asian dust collected in Beijing contained(4 ± 3) × 10~4 bacterial cells/m~3, approximately~4 times higher than in Osaka. On 15 April 2015, Beijing experienced severe Asian dust events with a 1000-fold increase in bacterial abundance, relative to non-Asian dust days. Dominant bacterial phyla and classes in Asian dust collected in Beijing were Actinobacteria, Bacilli and Acidobacteria, and the bacterial community composition varied more widely than in Osaka.The bacterial community compositions differed between the Beijing and Osaka dusts, even for the same Asian dust events. These results indicated that aerosol bacterial communities nearer the dust source are more affected by eolian dust than their distant counterparts.     

A nanofilter composed of carbon nanotube-silver composites for virus removal and antibacterial activity improvement

We have developed a new nanofilter using a carbon nanotube-silver composite material that is capable of efficiently removing waterborne viruses and bacteria.The nanofilter was subjected to plasma surface treatment to enhance its flow rate,which was improved by approximately 62%.Nanoscale pores were obtained by fabricating a carbon nanotube network and using nanoparticle fixation technology for the removal of viruses.The pore size of the nanofilter was approximately 38 nm and the measured flow rate ranged from 21.0 to 97.2 L/(min·m~2)under a pressure of 1–6 kgf/cm~2 when the amount of loaded carbon nanotube-silver composite was 1.0 mg/cm~2.The nanofilter was tested against Polio-,Noro-,and Coxsackie viruses using a sensitive real-time polymerase chain reaction assay to detect the presence of viral particles within the outflow.No trace of viruses was found to flow through the nanofilter with carbon nanotube-silver composite loaded above 0.8 mg/cm~2.Moreover,the surface of the filter has antibacterial properties to prevent bacterial clogging due to the presence of 20-nm silver nanoparticles,which were synthesized on the carbon nanotube surface.     

Design and modeling of optimal distillation sequence for recovery of valuable components from a waste photoresist stripper

Currently, waste photoresist stripper from the semiconductor industries is generally incinerated at high temperatures or processed as a high-calorie fuel, which can have adverse effects on the environment and economy. Recovery of valuable solvents from waste photoresist strippers is, therefore, very important for thin flat transistor-liquid crystal display (TFT-LCD) manufactures to reduce the production costs and protect the environment against industrial waste. In the present work, systematic laboratory-scale distillation experiments were carried out to regenerate the organic solvents from the waste photoresist stripper and determine if they are feasible to recycle for commercial TFT-LCD grade chemicals: in particular, 1-hydroxyethylpiperazine and methyl diglycol were mainly tried to retrieve. Based on the experiment results, possible alternative distillation sequences were examined through intensive techno-economic analysis using a rigorous process simulator. As a result, an optimal distillation sequence and condition were drawn to separate valuable organic solvents from waste photoresist stripper for a commercial purpose recovery process.     

The mixing and segregation characteristics of rice straw in a cylindrical bubbling fluidized bed

In the present study, an experiment was performed to investigate the mixing and segregation characteristics of standard sand and rice straw particles in a cylindrical bubbling fluidized bed. The mass ratio (rice straw/standard sand = 0.5–1.25 %) of two particles and superficial gas velocity (0.13–0.18 m/s) were changed as experimental variables. The pressure drop curve and Kramer’s equation were used to determine the minimum fluidization velocity and mixing index, respectively. In all cases, the mixing index was the lowest at U/U _mf = 1.15. Based on the point of U/U _mf = 1.15, the segregation region and mixing region were observed. In the segregation region, mass ratio of 0.75 % showed the lowest mixing index. At the U/U _mf = 1.23 which was selected as the starting of fast pyrolysis considering residence time and the previous fast pyrolysis experiment, mass ratio of 1.25 % showed the highest mixing index which was 0.90.