Management status of end-of-life vehicles and characteristics of automobile shredder residues in Korea

An end-of-life vehicle (ELV) is dismantled to recover and recycle any re-usable parts, then shipped to the shredding facility for further recovery of iron with any remaining Automobile Shredder Residue (ASR) to be considered as wastes and to be disposed of by either thermal treatment or landfill. Overall ELVs management status in Korea, including recycling resulting from the dismantling processes, was surveyed using some questionnaires given to dismantlers and other available information to provide some feasible means for future treatment. The averaged recycle rate in the dismantling stage showed a value of 44% and the rest of an ELV was then compressed and transported to shredding companies to recover mainly the iron content which averaged 38.7% of the mass of a new vehicle. The non-ferrous metals such as copper, antimony, zinc and aluminum accounted for only 1.5%. The Shredder dusts (SDs) were found to be composed of light and heavy fluffs and soil/dust and amounted to 15.8% based on the mass of a new vehicle. Dumping of fluff and inorganic residues into a landfill site, however, will be restricted when new regulations are implemented to reduce the disposal amount to less than 5% of a new car as done in European countries and Japan. The detailed characteristics of SDs were investigated to provide an idea of how to treat them in order to meet a future expected enforcement.     

Remediating munitions-contaminated soil with zerovalent iron and cationic surfactants

Soils contaminated from military operations often contain mixtures of HMX (octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine), RDX (hexahydro-1,3,5-trinitro-1,3,5-triazine), and TNT (2,4,6-trinitrotoluene) rather than a single explosive. Differences among explosives in solubility and reactivity make developing a single remediation treatment difficult. When Fe(0) was used to treat a munitions-contaminated soil, we observed high rates of destruction for RDX and TNT (98%) but not HMX. Our objective was to determine if HMX destruction by Fe(0) could be enhanced by increasing HMX solubility by physical (temperature) or chemical (surfactants) means. To determine electron acceptor preference, we treated RDX and HMX with Fe(0) in homogeneous solutions and binary mixtures. Increasing aqueous temperature (20 to 55 degrees C) increased HMX solubility (2 to 22 mg L(-1)) but did not increase destruction by Fe(0) in a contaminated soil slurry that also contained RDX and TNT. Batch experiments using equal molar concentrations of RDX and HMX demonstrated that RDX was preferentially reduced over HMX by Fe(0). By testing various surfactants, we found that the cationic surfactants (HDTMA [hexadecyltrimethylammonium bromide], didecyl, and didodecyl) were most effective in increasing HMX concentration in solution. Didecyl and HDTMA were also found to be highly effective in facilitating the transformation of HMX by Fe(0). Using HDTMA or didecyl solutions (3%, w/v) containing solid-phase HMX, we observed that 100% of the added HMX was transformed by Fe(0) in the didecyl matrix and 60% in the HDTMA matrix. These results indicate that cationic surfactants can increase HMX solubility and facilitate Fe(0)-mediated transformation kinetics but HMX destruction rates will be slowed when RDX is present.     

Combined effect of natural organic matter and surfactants on the apparent solubility of polycyclic aromatic hydrocarbons

Both natural organic matter (NOM) and surfactants are known to enhance the apparent aqueous solubility of hydrophobic organic contaminants (HOCs) in aqueous systems. In this study, the combined effect of NOM and surfactants on enhancing the solubility of HOCs was investigated, since both may occur and affect the fate and transport of HOCs in natural aqueous environments. Experimental results indicated that the apparent solubility of naphthalene, phenanthrene, and pyrene in NOM and anionic surfactant solution was lower than their solubility in NOM solution alone. However, the apparent solubility of an HOC in NOM and nonionic surfactant solution is almost the same as the sum of the HOC's solubility in NOM solution plus its solubility in nonionic surfactant solution. The observation that apparent aqueous solubility of HOCs in NOM and anionic surfactant solution is decreased is probably due to the fact that the cations that are released when the anionic surfactant dissociates may form ion pairs with acidic or phenolic groups associated with the NOM. This serves to increase the size of hydration of these groups, thereby decreasing the effective size of the nonpolar moieties associated with the NOM, and thus decreasing hydrophobic partitioning of the HOCs into the NOM. The results presented here will help us to understand the effect of NOM and surfactants on the fate and transport of HOCs in aquatic systems.     

Application of life-cycle assessment to type III environmental declarations

The objective of this research is to develop a desirable type III environmental declaration format for the industrial consumer. A total of five different scenarios were chosen for the presentation of life-cycle assessment results in a format that meets the requirements of a type III environmental declaration. Life-cycle assessment of an electronic component was performed for this purpose. Environmentally significant impact categories and input/output items of a product system derived from the life-cycle assessment are presented in this format. Presenting these information concisely in a standardized format would accelerate the communication of environmental aspects of materials and components in a product supply chain. Thus the type III environmental declaration can be a useful instrument for the manufacturing of an ecoproduct.     

Assessment of Flood Vulnerability Based on CMIP5 Climate Projections in South Korea

The objective of this article was to assess flood vulnerability based on the representative concentration pathways (RCP) scenarios at city and county levels. A quantile mapping method was adopted to correct bias that is inherent in climate change scenarios. A series of proxy variables related to climate exposure, sensitivity, and adaptive capacity were chosen to assess flood vulnerability. Proxy variables were standardized using the Z‐score method. Principal component analysis was carried out to calculate the weighting of proxy variables. The study area was the Korean peninsula. The spatial resolution was on a city and county basis and the temporal resolution was 1990s, 2025s, 2055s, and 2085s (divided into 1976‐2005, 2011‐2040, 2041‐2070, and 2071‐2100). In the spatial comparison, we found that the areas with high‐level flood vulnerability increased over time in the central region, including metropolitan areas, and near the southern coast. In the temporal comparison, we found that the RCP4.5 scenario showed a tendency to increase steadily and the RCP8.5 scenario showed a tendency to decrease in the 2055s slightly and increase again in the 2085s. The study findings may provide useful data for the determination of priority for countermeasure development, though robustness of these findings with additional future projections should be established.     

Evaluation of antifouling activity of eight commercially available organic chemicals against the early foulers marine bacteria and Ulva spores

Environmental impacts caused by tin and copper based commercial antifouling (AF) paints were proved to be detrimental to aquatic ecosystems. Therefore, a search of environmental friendly AF compounds to be used in marine paint to protect the surface of maritime developmental structures from the unwanted biofouling is a burning issue of the present time. Commercially available eight organic chemicals--allyl isothiocyanate, beta-myrecene, cis-3-hexenyl acetate, citral, ethyl heptanoate, eugenol, methyl caproate, and octyl alcohol were evaluated forAF activities using both laboratory and field assays. The test chemicals were found to repel the target motile marine bacteria--Alteromonas marina, Bacillus atrophaeus, Roseobactergallaeciensis and Shewanella oneidensis and motile spores of the green alga, Ulva pertusa. The bacterial and Ulva spore repulsion activities of the test chemicals were measured by chemotaxis and agar diffusion methods respectively interestingly these test chemicals were less toxic to the test fouling species. The toxicity of the test chemicals was measured by using antibiotic assay disks against the bacteria and motility test against Ulva spores. Moreover, in field assay, all test chemicals showed a perfect performance ofAF activity showing no fouling during the experimental period of one year Such results and commercial as well as technical feasibility of the test chemicals firmly showed the possibility of using as alternatives of the existing toxic AF agents.     

The effects of <Emphasis Type="Italic">Acidithiobacillus ferrooxidans</Emphasis> on the leaching of cobalt and strontium adsorbed onto soil particles

Bioleaching from soil artificially contaminated with analogues of radionuclides, Co and Sr, was carried out using a Fe-oxidizing bacterium, Acidithiobacillus ferrooxidans. Due to bacterial metabolism, the pH and dissolved Fe³⁺ concentration in a biotic slurry decreased and increased respectively, over time, but the concentrations of Co and Sr extracted from the soil showed no significant enhancement compared with those under abiotic control. In both cases, Co and Sr were leached from the soil during the initial period of the experiment, due to the initially low solution pH of 2.0, and the dissolved concentrations remained almost constant for the duration of the experiment (300 h). Since oxidation of Fe²⁺ by A. ferrooxidans led to the production of Fe precipitates and colloidal suspensions, the Co and Sr extracted into solution were most likely re-adsorbed onto the Fe solids. Also, A. ferrooxidans, without an external supply of Fe²⁺, extracted almost equal or greater amounts of Co and Sr from the soil than when Fe²⁺ was supplied. Under the same leaching conditions, the extent of Sr removal was much lower than that of Co. On the contrary to the high efficiency of microbial metal leaching in biohydrometallurgy for low-graded sulfide ores, which has been widely documented, conventional bioleaching techniques with A. ferrooxidans supplied with enough Fe²⁺ showed low efficiency for the removal of radionuclides loosely bound onto soil particle surfaces.     

AFM probe based nano mechanical scribing of soda-lime glass

In recent years, demands for miniature components have increased due to their reduced size, weight and energy consumption. In particular, brittle materials such as glass can provide high stiffness, hardness, corrosion resistance and high-temperature strength for various biomedical and high-temperature applications. In this study, cutting properties and the effects of machining parameters on the ductile cutting of soda-lime glass are investigated through the nano-scale scratching process. In order to understand the fundamentals of the material removal mechanism at the atomic scale, such as machined surface quality, cutting forces and the apparent friction, theoretical investigation along with experimental study are needed. Scribing tests have been performed using a single crystal diamond atomic force microscope (AFM) probe as the scratching tool, in order to find the cutting mechanism of soda-lime glass in the nano-scale. The extended lateral force calibration method is proposed to acquire accurate lateral forces. The experimental thrust and cutting forces are obtained and apparent friction coefficients are deduced. The effects of feed rates and the ploughing to shearing transition of soda-lime glass have been investigated.     

Decarbonization of Vietnam’s economy: decomposing the drivers for a low-carbon growth

Environmental Science and Pollution Research - Vietnam has witnessed a rapid increase in national-level CO2 emissions due to rising urbanization, economic expansion, export growth, and industrial...     

Do first-trimester screening algorithms for preeclampsia aligned to use of preventative therapies reduce the prevalence of pre-term preeclampsia: A systematic review and meta-analysis

Objective

Traditional obstetric practice relies upon history-based assessment to screen for preeclampsia and guide preventative therapies but is hampered by low sensitivity, high false-positive rates and low treatment rates. First-trimester screening algorithms represent the most efficacious approach for risk prediction and could target early initiation of aspirin to well-defined high-risk populations. A large randomised controlled trial has demonstrated the clinical benefits of this approach, but widespread practice implementation has remained elusive.

Methods

We performed a systematic review and meta-analysis summarising studies linking first-trimester preeclampsia screening algorithms with the initiation of preventative therapy and examined their effect on pre-term preeclampsia rates compared with standard maternity care. Odds ratios were calculated together with 95% confidence intervals.

Results

7 studies with a total of 377,790 participants were included. Within singleton populations, early initiation of aspirin in response to a high-risk screening algorithm result reduced the prevalence of pre-term preeclampsia by 39% compared with routine antenatal care (odds ratio 0.61; 95% CI: 0.52–0.70). There were significant reductions in the prevalence of preeclampsia at <32–34 weeks, preeclampsia at any gestation and stillbirth.

Conclusion

First-trimester screening algorithms for preeclampsia aligned with early initiation of preventative therapy with aspirin reduce the prevalence of pre-term preeclampsia.