Simulating urban-scale air pollutants and their predicting capabilities over the Seoul metropolitan area

Urban-scale air pollutants for sulfur dioxide, nitrogen dioxide, particulate matter with aerodynamic diameter > or = 10 microm, and ozone (O3) were simulated over the Seoul metropolitan area, Korea, during the period of July 2-11, 2002, and their predicting capabilities were discussed. The Air Pollution Model (TAPM) and the highly disaggregated anthropogenic and the biogenic gridded emissions (1 km x 1 km) recently prepared by the Korean Ministry of Environment were applied. Wind fields with observational nudging in the prognostic meteorological model TAPM are optionally adopted to comparatively examine the meteorological impact on the prediction capabilities of urban-scale air pollutants. The result shows that the simulated concentrations of secondary air pollutant largely agree with observed levels with an index of agreement (IOA) of >0.6, whereas IOAs of approximately 0.4 are found for most primary pollutants in the major cities, reflecting the quality of emission data in the urban area. The observationally nudged wind fields with higher IOAs have little effect on the prediction for both primary and secondary air pollutants, implying that the detailed wind field does not consistently improve the urban air pollution model performance if emissions are not well specified. However, the robust highest concentrations are better described toward observations by imposing observational nudging, suggesting the importance of wind fields for the predictions of extreme concentrations such as robust highest concentrations, maximum levels, and >90th percentiles of concentrations for both primary and secondary urban-scale air pollutants.     

Indivisibility and divisibility in land development over time and under uncertainty

The quasi-option value (QOV) literature originated by Arrow et al. (Arrow, K.J., Fisher, A.C., 1974. Environmental preservation, uncertainty, and irreversibility. Quarterly Journal of Economics 88, 312-319) and by Henry (Henry, C., 1974. Option values in the economics of irreplaceable assets. Review of Economic Studies 41, 89-104) is largely concerned with the analysis of two-period models of land development. Our paper extends this literature by analyzing two scenarios in which the decision to develop land is made in a multi-period and stochastic framework. In the first scenario, the development decision is indivisible. In contrast, in the second scenario, the development decision is divisible. Specifically, we study the properties of the indivisible development decision when there is a time constraint on when land is to be developed. We then analyze the ways in which the divisible land development decision depends on the extent of a landowner's landholding and on the number of development opportunities awaiting this landowner.     

Use of sodium transfer tissue biosensor (STTB) for monitoring of marine toxic organism

A highly sensitive sodium (Na+) transfer tissue biosensor (STTB) was designed using a frog bladder membrane to measure paralytic shellfish poisons (PSP). The STTB consists, of a Na+ electrode covered by the membrane, which was then integrated into a flow-through system for continuous measurements. In the absence of Na+ channel blocker, active transfer of Na+ occurred from inside to outside across the frog membrane. When the STTB was used to measure the Na+ -dependent dissociation of PSP, it was able to detect PSB at a level contained in a single cell. However, 5 fg or higher (100 cells or more) is needed for accurate and reproducible measurements. The toxicity obtained by the STTB was significantly correlated (r = 0.9449) to that determined by the HPLC. Therefore, the simple method of the STTB can be used not only to detect a low level PSP in toxic plankton populations, but also to monitor poisons in shellfish.     

Receptor-mediated in vitro bioassay for characterization of Ah-R-active compounds and activities in sediment from Korea

Sediment extracts of stream sediments, collected from inland areas of Lake Shihwa (LSI) and Masan Bay (MBI), were screened for their abilities to induce aryl hydrocarbon receptor (Ah-R) mediated gene expression in vitro. Cell viability assay was also performed to examine cytotoxic effects on the Ah-R-mediated activities of sediment samples. Over 80% (30 out of 36) of sediment raw extracts (REs) induced significant Ah-R-mediated activities in the H4IIE-luc cell bioassays. Ah-R-mediated activities of sediment REs from LSI locations (mean=58%-TCDD-max; n=21) were greater than those of sediment REs from MBI locations (mean=35%-TCDD-max; n=15), in general. Seven (mean+/-SD=100+/-14%-TCDD-max) of 21 sediment REs from LSI showed Ah-R-mediated activities comparable to that (set to, 100%-TCDD-max) elicited by 1240 pM TCDD. Whereas, in MBI, only two REs from M1 (93%-TCDD-max) and M9 (82%-TCDD-max) showed significantly great responses that comparable to maximum response of TCDD standard curve. Sample potencies relative to the TCDD standard (TCDD-EQs) were estimated based on full dose-response characteristics of REs and TCDD-EQs were found to be 14-868 pg TCDD/g, dw and 17-275 pg TCDD/g, dw, in LSI and MBI, respectively. A range of TCDD-EQ20-80 of samples, based on multiple estimates of relative potency (REP20-80), did not vary greatly (2-4-fold) in the H4IIE-luc bioassays, which indicated relatively low degree of uncertainties in point estimates of REP for sediment REs examined. Acid-treatment of REs samples improved quantitative biological responses of samples followed by decreases in cytotoxicity identified by MTT cell viability assays.     

Enhanced desorption of phenanthrene from soils using hydroxypropyl-beta-cyclodextrin: experimental results and model predictions

Objective of this study was to evaluate the effects of hydroxypropyl-beta-cyclodextrin (HPCD) on the removal of phenanthrene from solid phase. Batch tests for the phenanthrene distribution between aqueous and solid phase were conducted in the presence of HPCD. Column tests and numerical simulations were conducted to evaluate the roles of HPCD cavities and interaction rates between water, HPCD, and solid phase in the enhanced removal of phenanthrene. Experimental results showed that HPCD was effective in removing sorbed phenanthrene from subsurface environment, primarily due to its negligible sorption to the solid phase and the partitioning of phenanthrene into HPCD cavities. From the numerical simulations, it was found that rate-limited partitioning of phenanthrene into HPCD cavities was most influential factor in the enhanced elution of phenanthrene. Sorption and desorption rate of phenanthrene between aqueous and solid phase was very fast or near equilibrium state. Interaction rates of contaminant between water, HPCD, and solid phase could be affected by other factors such as soil types and organic matter contents. Results from this study implied that HPCD flushing could be effectively applied for the removal of hydrophobic organic pollutants existing in the soils as sorbed or NAPL state.     

Effect of Crystalline and Amorphous Structures on Biodegradability of Poly(Tetramethylene Succinate)

The effect of orientation in the amorphous and crystalline regions on the biodegradability of PTMS [poly(tetramethylene succinate)] was studied using the amorphous orientation function, birefringence, and crystallinity. The crystalline and amorphous intrinsic lateral sonic moduli, E _t,c ⁰ and E _t,am ⁰ , were 2.61 × 10³ and 0.41 × 10³ MPa, respectively. Using the data on birefringence, crystalline and amorphous orientation function (f and f _am), crystallinity, and sonic modulus of the oriented PTMS fibers, the intrinsic birefringence of the crystalline ( _c ⁰ ) and amorphous ( _am ⁰ ) regions were evaluated to be 0.0561 and 0.0634, respectively. The biodegradabilities of oriented PTMS films were reduced as the elongation increased, i.e., the amorphous orientation increased. At low elongation (100 and 150%), however, biodegradabilities remained unchanged when the degradation test was performed in activated sludge, which was attributed to the amorphous orientation occurring even at 100% elongation, though the amorphous orientation direction was perpendicular to the fiber axis.     

Design and fabrication of a laminated thermoforming tool with enhanced features

Thermoforming is a popular manufacturing process for creating useful shapes out of heated thermoplastic sheets using a porous tool under differential pressure. For large, heavy-gauge parts, thermoforming tools are typically made by CNC machining a billet of material or sand casting from an inexpensive master pattern. Although these tooling methods are well established, it is difficult to incorporate enhanced tool functionality such as conformal cooling channels, embedded sensors, unimpeded vacuum channel placement, and customized thermal mass. Profiled Edge Laminas (PEL), a rapid tooling method based on profiling, assembling, and clamping an array of thick layers, is ideally suited for tools used for thermoforming large, heavy-gauge parts and requiring enhanced features. This paper describes how the PEL tooling method can be applied to the design and fabrication of a thermoforming tool and demonstrates the entire process through a case study. Tooling design guidelines and analytical models for predicting conformal channel and vacuum line performance are included. The ease with which multiple-zone conformal cooling/heating channels, vacuum lines, and temperature sensors are incorporated into the tool is also highlighted. Specifically, a 46-layer aluminum PEL tool clamped together with bolts is successfully designed, fabricated, and demonstrated for thermoforming a 0.3×0.4×0.4 m part made from a PVC/Acrylic blend based on the outlined method. The tool incorporates three independent cooling zones sealed by a polymer sealant, three embedded temperature sensors, and an elaborate matrix of vacuum channels. All tool features and the basic geometry were machined into each individual lamina in the same set-up by 2D abrasive waterjet machining, and the final tool surface was CNC-machined. The PEL tooling method is successfully applied to the manufacture of a large, heavy-gauge thermoformed part intended for production.     

Public willingness to pay for eradicating a harmful marine organism: the case of Aurelia aurita in South Korea

Environmental Science and Pollution Research - Aurelia aurita (AA), a legally registered harmful marine organism in South Korea, is damaging marine human leisure activities, local residents’...