Evaluation of a fast response pressure solver for flow around an isolated cube

This work describes and evaluates a pressure solver that has been incorporated into a fast response three-dimensional building-resolving diagnostic wind modeling system. The solver computes the three-dimensional pressure field around buildings and on exterior walls in terms of a coefficient of pressure by solving a simplified pressure Poisson equation (that neglects turbulence stresses in the Navier-Stokes) for incompressible flow. The input to the solver is the three-dimensional mean wind field obtained from a fast response empirical-diagnostic urban wind model. The present study is an evaluation of the pressure solver using wind-tunnel data for flow normal to and at a 45° angle to an isolated cubical building. Results for the normal incident wind angle case indicate that the model satisfactorily reproduces the general spatial patterns and the magnitude of the pressure difference around much of the cube. Details of the flow field that are not satisfactorily predicted include the spatial distribution of pressure on the roof and the lower half of the front side of the building and the magnitude along the sidewalls where pressures are over predicted. The results for the 45° case show reasonable agreement between the model and experiments on the front and the back walls, but over predict pressures on the leading edge of the rooftop. Regions with poor pressure predictions appear to be a result of unsatisfactory mean wind modeling.     

Empirical likelihood confidence intervals for adaptive cluster sampling

Adaptive cluster sampling (ACS) is an efficient sampling design for estimating parameters of rare and clustered populations. It is widely used in ecological research. The modified Hansen-Hurwitz (HH) and Horvitz-Thompson (HT) estimators based on small samples under ACS have often highly skewed distributions. In such situations, confidence intervals based on traditional normal approximation can lead to unsatisfactory results, with poor coverage properties. Christman and Pontius (Biometrics 56:503–510, 2000) showed that bootstrap percentile methods are appropriate for constructing confidence intervals from the HH estimator. But Perez and Pontius (J Stat Comput Simul 76:755–764, 2006) showed that bootstrap confidence intervals from the HT estimator are even worse than the normal approximation confidence intervals. In this article, we consider two pseudo empirical likelihood functions under the ACS design. One leads to the HH estimator and the other leads to a HT type estimator known as the Hájek estimator. Based on these two empirical likelihood functions, we derive confidence intervals for the population mean. Using a simulation study, we show that the confidence intervals obtained from the first EL function perform as good as the bootstrap confidence intervals from the HH estimator but the confidence intervals obtained from the second EL function perform much better than the bootstrap confidence intervals from the HT estimator, in terms of coverage rate.     

Characterization and source apportionment of polycyclic aromatic hydrocarbons in the ambient air (Tehran,Iran)

Polycyclic aromatic hydrocarbons (PAHs) are ubiquitous in the urban atmosphere and the atmospheric pollutants to be identified as the most suspected carcinogens. In early measurements of urban PAH concentrations in Tehran area, the correlation between concentrations of different species indicated that automobiles were the predominant source of emission of PAHs in this city. From the diagnostic ratios, the results indicated that PAHs in the ambient air in Tehran originate primarily from diesel and gasoline engines, but contribution of the related diesel emission is apparently higher, or dominant, at the sampling sites and therefore considered as the major emission of PAHs in the ambient air.     

Effect of the nitrification inhibitor dicyandiamide on microbial communities and N<Subscript>2</Subscript>O from an arable soil fertilized with ammonium sulphate

Nitrous oxide (N₂O) affects climate change as a greenhouse gas and indirectly contributes to stratospheric ozone depletion. The main source of N₂O in soils is denitrification which requires high soil moisture, carbon and nitrate. Nitrification inhibitors can be used to mitigate emissions of N₂O from soils. In Portugal, fertilisers are often applied when soils are still relatively warm and moist conditions conducive to denitrification. A Portuguese arable soil was inhibited with dicyandiamide, a nitrification inhibitor and the effect on soil microbiological activity and composition was determined after 46 days. Soils were then incubated and received carbon and ammonium under high soil water conditions and mineral N and N₂O fluxes were measured during 22 days. We found that dicyandiamide decreased microbial populations and activity, but did not alter composition. Pre-conditioning of the soil with dicyandiamide was 80% more effective in reducing fluxes of N₂O than simultaneous application with fertiliser.     

Evaluation of metabisulfite and a commercial steel wool for removing chromium(VI) from wastewater

Efficiency of metabisulfite and a commercial steel wool as reducing agents in the removal of Cr(VI) from wastewaters was evaluated. Chromium(VI) was converted to Cr(III), precipitated with NaOH, and removed by filtration. A reduction of more than 1.0 × 10⁵ and 4.0 × 10⁵ fold in total Cr and the Cr(VI) concentrations, respectively, was observed by employing steel wool masses as low as 0.4420 g to 30-mL solutions of wastewater. Chromium(III) hydroxide obtained after the treatment was recycled and used as marker in cattle nutrition studies. The liquid residue obtained after the treatment was reused as precipitation agent replacing NaOH.     

Removal of malachite green from water samples by cloud point extraction using Triton X-100 as non-ionic surfactant

A surfactant mediated cloud point extraction (CPE) procedure has been developed to remove color from wastewater containing malachite green using Triton X-100 as non-ionic surfactant. The effects of the concentration of the surfactant, temperature and salt concentration on the different concentrations of dye have been studied and optimum conditions were obtained for the removal of malachite green. The concentration of malachite green in the dilute phase was measured using UV–Vis spectrophotometer. It was found that the separation of phases was complete and the recovery of malachite green was very effective in the presence of NaCl as an electrolyte. The results showed that up to 500 ppm of malachite green can quantitatively be removed (>95%) by CPE procedure in a single extraction using optimum conditions.     

Rechts- und naturwissenschaftliche Kooperation im Umweltrecht am Beispiel des Chemikalien- und Naturschutzrechts

This article is based on a speech held at the annual conference of the German Chemical Society (working group Environmental Chemistry and Ecotoxicology) on 23 September 2009 in Trier. Despite strong arguments for interdisciplinary co-operation in the field of law and natural sciences, it still appears as a rather rare phenomenon in the current research environment. This is partly due to the difficulties emerging from the increasing specialization and diversification in sciences. Beyond that, the current possibilities of third-party funding, not least aimed at initiating and intensifying interdisciplinary projects, provide a comparatively weak incentive to jurists. Nonetheless, there are indications for a change in the near future. However, at least chemical law (as well as for example nature conservation law) offers a range of starting points for a productive co-operation among jurists and natural scientists.     

Gold and gold working in Late Bronze Age Northern Greece

Numerous objects of gold displaying an impressive variety of types and manufacturing techniques are known from the Late Bronze Age (LBA) contexts of Mycenaean Greece, but very little is known about the origin and processing of gold during the second millennium B.C: . Ancient literature and recent research indicate that northern Greece is probably the richest gold-bearing region in Greece, and yet, very little evidence exists regarding the exploitation of its deposits and the production as well as use of gold in the area during prehistory. The unusual find of a group of small stone crucibles at the prehistoric settlement of Thessaloniki Toumba, one with visible traces of gold melting, proves local production and offers a rare opportunity to examine the process of on-site gold working. Furthermore, the comparison of the chemical composition of prehistoric artefacts from two settlements with those of gold deposits in their immediate areas supports the local extraction of gold and opens up the prospect for some of the Mycenaean gold to have originated in northern Greece. The scarcity of gold items in northern Greek LBA contexts may not represent the actual amount of gold produced and consumed, but could be a result of the local social attitudes towards the circulation and deposition of artefacts from precious metals.