Shoaling internal waves may reduce gravity current transport

Gravity currents descending along slopes have typically been studied in quiescent environments, despite the fact that in many geophysical settings there is significant externally driven motion. Here we investigate how the head of a gravity current is influenced by interfacial internal waves at the pycnocline of a two-layer ambient water column. Our experimental measurements show that larger amplitude internal waves, interacting with the gravity current, reduce both the mass transport by the gravity current and its thickness. These results suggest that the ambient internal wave field should be considered when estimating transport by gravity currents in geophysical settings with strong internal waves, such as lakes and the coastal ocean.     

A high resolution measurement of the morning ABL transition using distributed temperature sensing and an unmanned aircraft system

We used an unmanned aircraft system (UAS) to lift and suspend distributed temperature sensing (DTS) technologies to observe the onset of an early morning transition from stable to unstably stratified atmospheric conditions. DTS employs a fiber optic cable interrogated by laser light, and uses the temperature dependent Raman scattering phenomenon and the speed of light to obtain a discrete spatial measurement of the temperature along the cable. The UAS/DTS combination yielded observations of temperature in the lower atmosphere with high resolution (1 s and 0.1 m) and extent (85 m) that revealed the detailed processes that occurred over a single morning transition. The experimental site was selected on the basis of previous experiments and long term data records; which indicate that diurnal boundary layer development and wind sectors are predictable and consistent. The data showed a complex interplay of motions that occur during the morning transition that resulted in propagation and growth of unstable wave modes. We observed a rapid cooling of the air aloft (layer above the strong vertical temperature gradient) layer directly after sunrise due to vertical mixing followed by an erosion of the strong gradient at the stable layer top. Midway through the transition, unstable wave modes were observed that are consistent with Kelvin–Helmholtz motions. These motions became amplified through the later stages of the transition.     

Interaction of North Brazil Current rings with the Lesser Antilles Arc and Barbados Island: laboratory experiments and observations

The interaction of North Brazil Current (NBC) rings with the Lesser Antilles Arc (LAA) and the Barbados Island (BI) is addressed by experimental modeling and observations. Our results compare well with previous experimental results and numerical simulations. Several sizes, intensities and two different vorticity profiles (non-isolated and initially isolated vortices) were tested. Three regimes were found namely: (1) the vortex surrounds the BI and its translational motion (TM) stops North of BI; (2) the vortex passes through the corridor between the LAA and the BI by reducing its size; and (3) The vortex stopped at the entrance to the corridor South of the BI. Isolated vortices were prone to stopped North of the BI. Apparently the intensity in the outer vorticity ring has an influence on the fate of the NBC ring. Non-isolated vortices can also stop its TM North of the BI because when in \(\beta\) plane they develop an outer ring similar to the isolated vortices. From these results we conclude that intense and big NBC rings are likely to stop its TM North of the BI. Medium and moderate vortices stops its TM South of the BI and they reduce their size until they are able to pass through the corridor between the LAA and the BI. Mild vortices of all sizes stop South of the corridor, close to the BI and the LAA. Drifter trajectories and Sea Surface Height altimetry confirm the results.     

Trajectory of a jet in crossflow in a channel bend

Mixing in rivers is an important issue with many applications in water quality and water resource management. Mixing of effluents with ambient river water is especially important, particularly in river bends, where secondary circulation complicates the mixing process. By comparing measured trajectories from dye tests to velocimetry data measured with an acoustic Doppler velocimeter, this paper models the trajectory of a jet in an open channel bend using a modified formula for a jet trajectory in a straight crossflow. The original formula is shown to be insufficient for modeling the trajectory in the bend. Modifications are proposed using the position of the centre of the main secondary circulation cell to account for the bend effects. In the absence of secondary circulation, the modified formula reduces to the original formula. Once the secondary circulation has developed, the proposed formula is shown to have better residuals, lower root mean squared error, and higher \(R^2\) than the original formula.     

Fast and complete removal of the 5-fluorouracil drug from water by electro-Fenton oxidation

Cytostatic drugs are a troublesome class of emerging pollutants in water owing to their potential effects on DNA. Here we studied the removal of 5-fluorouracil from water using the electro-Fenton process. Galvanostatic electrolyses were performed with an undivided laboratory-scale cell equipped with a boron-doped diamond anode and a carbon felt cathode. Results show that the fastest degradation and almost complete mineralization was obtained at a Fe²⁺ catalyst concentration of 0.2 mM. The absolute rate constant for oxidation of 5-fluorouracil by hydroxyl radicals was 1.52 × 10⁹ M^?1 s^?1. Oxalic and acetic acids were initially formed as main short-chain aliphatic by-products, then were completely degraded. After 6 h the final solution mainly contained inorganic ions (NH₄ ⁺, NO₃ ^? and F^?) and less than 10% of residual organic carbon. Hence, electro-Fenton constitutes an interesting alternative to degrade biorefractory drugs.     

Nanosystems for drug delivery of coenzyme Q10

Coenzyme Q10 is an antioxidant present in the human body. Coenzyme Q10 has an essential role in various biochemical reactions. The deficiency of coenzyme Q10 in the body leads to disorders including neurological degeneration, ageing and cancer. Clinical trials have tested coenzyme Q10 as a drug or a dietary supplement. However, the major pharmaceutical issue of coenzyme Q10 delivery is its high molecular weight and poor water solubility. This limitation leads to its poor oral bioavailability. Several methods have been designed to overcome the poor water solubility of coenzyme Q10, such as size reduction and ionization. This article presents nanotechnology-based drug delivery systems for coenzyme Q10 with special emphasis on pharmacokinetic perspectives and clinical relevance. Systems include nanoparticles, solid dispersions, liposomes, nanoemulsions, self-emulsifying drug delivery systems, nanostructured lipid carriers, cyclodextrins and nanocapsules.     

Chitosan nanoparticles preparation and applications

Shell fish processing industry is very common in coastal areas. While processing, only the meat is taken, the head and shells are discarded as waste. On an average, the sea food industry produces 80,000 tons of waste per year. The sheer amount of waste makes degradation a slow process causing accumulation of waste over a period of time. A very simple and effective solution to this environmental hazard is the recycling of shell waste to commercially viable products like chitin. Chitosan is the N-acetyl derivative of chitin obtained by N-deacetylation. Chitosan is widely used in food and bioengineering industries for encapsulation of active food ingredients, enzyme immobilization, as a carrier for controlled drug delivery, in agriculture as a plant growth promoter. Chitosan is also a defense elicitor and an antimicrobial agent. Chitosan has interesting properties such as biodegradability, biocompatibility, bioactivity, nontoxicity and polycationic nature. This review presents structural characteristics and physicochemical properties of chitosan. The methods of preparation of chitosan nanoparticles are detailed. Applications of chitosan nanoparticles are discussed. Applications include drug delivery, encapsulation, antimicrobial agent, plant growth-promoting agent and plant protector.     

Chemical speciation and bioaccessibility of lead in surface soil and house dust,Lavrion urban area,Attiki, Hellas

In the Lavrion urban area study, Hellas, a five-step sequential extraction method was applied on samples of ‘soil’ (n = 224), affected by long-term mining and metallurgical activities, and house dust (n = 127), for the purpose of studying the potential bioaccessibility of lead and other metals to humans. In this paper, the Pb concentrations in soil and house dust samples are discussed, together with those in rocks and children’s blood. Lead is mainly associated with the carbonate, Fe–Mn oxides and residual fractions in soil and house dust. Considering the very low pH of gastric fluids (1–3), a high amount of metals, present in soil (810–152,000 mg/kg Pb) and house dust (418–18,600 mg/kg Pb), could be potentially bioaccessible. Consequently, children in the neighbourhoods with a large amount of metallurgical processing wastes have high blood-Pb concentrations (5.98–60.49 μg/100 ml; median 17.83 μg/100 ml; n = 235). It is concluded that the Lavrion urban and sub-urban environment is extremely hazardous to human health, and the Hellenic State authorities should urgently tackle this health-related hazard in order to improve the living conditions of local residents.     

Increasing polybrominated diphenyl ether (PBDE) contamination in sediment cores from the inner Clyde Estuary,UK

The concentrations of 16 polybrominated diphenyl ether (PBDE) congeners in six short sediment cores from the Clyde Estuary were determined by gas-chromatography mass-spectrometry. Total PBDE concentrations ranged from 1 to 2,645 μg/kg and the average concentration was 287 μg/kg. BDE-209 was the main congener and varied from 1 to 2,337 μg/kg. Elevated total PBDE concentrations were observed close to the sediment surface in the uppermost 10 cm of four of the six sediment cores. Comparison of the down core PBDE profiles revealed that the increase was driven by the accumulation of deca-BDE. Although the deca-BDE mix was dominant, the presence of lower molecular weight congeners BDE-47, BDE-99, BDE-183 and BDE-153 at most sediment intervals suggested additional sources of penta-BDE and octa-BDE pollution. Changing PBDE source input was the major factor in influencing the proportion of nona-brominated congeners, although other explanations such as post burial photo-debromination of BDE-209 cannot be entirely discounted. A clear cascading to lower hepta-, hexa-, and penta-homologues was not found. The increase in total PBDE concentrations and particularly the deca-BDE may possibly be ascribed to the use and subsequent disposal of electrical appliances such as televisions and computers. In the Clyde sediments, the proportion of nona-brominated congeners was higher than that reported for commercial mixtures. This might be due to changing sources of PBDEs or post burial photo-debromination of BDE-209.     

PULSE,progressive upper level set scan statistic for geospatial hotspot detection

This paper presents a scan statistic, progressive upper level set (PULSE) scan statistic, for geospatial hotspot detection and its software implementation. Like ULS, the PULSE scan statistic is based on the arbitrarily shaped scan window and can be adapted for a network setting. PULSE is a refinement of the upper level set (ULS) scan statistic. Like some other likelihood based scanning devices, the ULS scan statistic identifies maximum likelihood estimate (MLE) zones that tend to be ‘stringy’ and sprawling. Its search path increases possibility of inclusion of extraneous cells in its MLE zones and, to a smaller extent, of exclusion of cells that belong to a true hotspot from its MLE zone. The PULSE scan statistic achieves improvement over the ULS scan statistic in two ways. First, it begins its search for a most likely zone with a large population of candidate zones obtained by modifying the ULS tree structure and continues its search using a genetic algorithm. Secondly, to reduce chances of generating an MLE that is excessively stringy and that includes extraneous cells in the MLE zone, PULSE uses cardinality and compactness of zones along with their likelihoods as the fitness function in the genetic algorithm and uses several pertinent criteria including evenness of intra-zone cellular response ratios to determine the MLE zone. To reduce computation, Gumbel distribution of extreme values is used to determine the p-value of the MLE zone. Better results come at the cost of increased processing time. An evaluative performance study is presented.