Performance of a small-scale solar-powered adsorption cooling system

In this study, an experimental investigation on the performance of a small-scale residential-size solar-driven adsorption (silica gel-water) cooling system that was constructed at Assiut University campus, Egypt is carried out. As Assiut area is considered as hot, arid climate, field tests for performance assessment of the system operation during the summer season are performed under different environmental operating conditions. The system consists of an evacuated tube with a reflective concentration parabolic surface solar-collector field with a total area of 36 m², a silica gel-water adsorption chiller of 8 kW nominal cooling capacity, and hot and cold water thermal storage tanks of 1.8 and 1.2 m³ in volume, respectively. The results of summer season field test show that under daily solar insolation varying from 21 to 27 MJ/m², the solar collectors employed in the system had high and almost constant thermal efficiency. The daily solar-collector efficiency during the period of system operation ranged from about 50% to 78%. The adsorption chiller performance shows that the chiller average daily coefficient of performance (COP) was 0.41 with the average cooling capacity of 4.4 kW when the cooling-water and chilled-water temperatures were about 31°C and 19°C, respectively. As the chiller cooling water is cooled by the cooling tower in the hot arid area, the cooling water is at a higher temperature than the design point of the chiller. Therefore, an experiment was carried out using the city water for cooling. The results show that an enhancement in the chiller COP by 40% and the chilling power by 17% has been achieved when the city water was 27.7°C.     

Evaluation of hydroxyapatite/poly(acrylamide-acrylic acid) for sorptive removal of strontium ions from aqueous solution

Environmental Science and Pollution Research - A composite polymer, hydroxyapatite/poly(acrylamide-acrylic acid), was synthesized by gamma-induced polymerization. The factors affecting the sorption...     

Analyses of phenolic compounds occurring in olive oil mill wastewaters by GC–MS

Phenolic compounds in olive oil mill wastewaters were analysed by HRGC–MS after extracting the acidified solution with ethyl acetate and derivatization with N,O-bis(trimethylsilyl)trifluoroacetamide. Both simple and complex phenols were detected with the latter being the most abundant. 1,2-dihydroxybenzene (catechol), p-hydroxyphenyl ethanol (tyrosol), 3,4-dihydroxyphenyl ethanol (hydroxytyrosol) and 4-hydroxy-3-methoxyphenyl ethanol (homovanillyl alcohol) predominated among the simple phenols using a gas chromatograph coupled with a mass selective detector.     

Delineating shallow saline groundwater zones from Southern India using geophysical indicators

A geophysical survey was conducted over an industrial belt encompassing 80 functional leather factories in Southern India. These factories discharge untreated effluents which pollute shallow groundwater where electrical conductivity (EC) value had a wide range between 545 and 26,600 μS/cm (mean, 3, 901 μS/cm). The ranges of Na⁺ and Cl^? ions were from 46 to 4,850 mg/L (mean, 348 mg/L) and 25 to 10,390 mg/L (mean, 1,079 mg/L), respectively. Geoelectrical layer parameters of 37 vertical electrical soundings were analyzed to demarcate fresh and saline water zones. However, the analysis not did lead to a unique resolution of saline and fresh waters. It was difficult to assign a definitive value to the aquifer resistivity of any area. Thus, geophysical indicators, namely longitudinal unit conductance (S), transverse unit resistance (T), and average longitudinal resistivity (R _s), were calculated for identifying fresh and saline waters. Spatial distributions of S, T, and R _s reflected widely varying ranges for the saline and fresh water zones. Further, the empirical relation of formation factor (F) was established from pore-water resistivity and aquifer resistivity for fresh and saline aquifers, which may be used to estimate local EC values from the aquifer resistivity, where well water is not available.     

Residues of PCDD,PCDF, and PCBs in some marine organisms in Lake Temsah,Ismailia, Egypt

Residues of PCDDs/F, non-ortho, mono-ortho PCBs, and other PCBs were monitored in the tissues of mullet fish, bolti fish, bivalves and crab taken from Lake Temsah, at Ismailia, Egypt.

Results showed that 2,3,7,8 Tetra CDD and 1,2,3,7,8 Penta CDD were the most frequently detected PCDD congeners. Similarly, 2,3,7,8 Tetra CDF, 1,2,3,7,8 Penta CDF and 2,3,4,7,8 Penta CDF were the most frequently detected PCDF congeners. No relationship was apparent between the concentrations of detected PCDDs congeners and the degree of chlorination, except with crab samples in which an increase in the chlorination coincided with a decrease in the concentrations of the congeners.

In PCDF congeners, detected residues have had a reversed relationship with chlorination increase. In PCDD congeners, Octa CDD had the highest detected concentrations in the two fish species, while in the bivalves and crab, 2,3,7,8 Tetra CDD had the highest concentrations. The mullet fish had the highest total PCDDs concentration, at 0.398?pg/g fresh weight, followed by crab at 0.395?pg/g fresh weight, then bivalves and bolti fish at 0.187 and 0.062?pg/g fresh weight, respectively. In all the examined organisms, the total concentrations of PCDFs were much higher than the total concentrations of the PCDD congeners. The WHO–TEQ values were 11.92, 39.12, 25, and 3.6?pg/g fresh weight, for mullet fish, bolti fish, bivlaves and crab, respectively. The concentration of the mono-ortho congeners CB 118 was the highest detected of all non-ortho and mono-ortho PCBs congeners, with values of 0.382, 0.022, 0.231 and 0.357?ng/g fresh weight, in mullet fish, bolti fish, bivalves and crab, respectively. The WHO–TEQ concentrations were 0.799, 0.003?pg/g fw, 0.05?pg/g fresh weight, 0.676?pg/g, and 0.799?pg/g fresh weight, for the same species, respectively. The total concentration of PCBs 28, 52, 95, 99, 101, 105, 110, 118, 138, 146, 149, 151, 153, 170, 177, 180, 187 were 6.86?ng/g fresh weight for mullet fish, 0.2?ng/g fresh weight, for bolti fish, 2.72?ng/g fresh weight for bivalves and 2.8?ng/g fresh weight for crab, respectively.     

Impacts of climate variability and changes on domestic water use in the Yellow River Basin of China

We present a methodology for using a domestic water use time series that were obtained from Yellow River Conservancy Commission, together with the climatic records from the National Climate Center of China to evaluate the effects of climate variability on water use in the Yellow River Basin. A suit of seven Global Circulation Models (GCMs) were adopted to anticipate future climate patterns in the Yellow River. The historical records showed evidences of rises in temperature and subsequent rises in domestic water demand in the basin. For Upstream of Longyangxia region, the impact was the least, with only 0.0021?×?10⁸ m³ for a temperature increase of 1 °C; while for Longyangxia-Lanzhou region, domestic water use was found to increase to 0.18?×?10⁸ m³ when temperature increases 1 °C. Downstream of Huayuankou was the region with the most changes in temperature that gave the highest increase of 1.95?×?10⁸ m³ in domestic water demand for 1 °C of change of temperature. Downstream of Huayuankou was identified as the most vulnerable area, where domestic water demand increases nearly by 42.2 % with 1 °C increase of temperature. Judging from the trends of temperature range, we concluded that future temperature in Yellow River Basin has an increasing tendency. This could worsen the existing issues of domestic water demand and even more to trigger high competition among different water-using sectors.     

The semiochemically mediated interactions between bacteria and insects

In natural environment, semiochemicals are involved in many interactions between the different trophic levels involving insects, plants and hosts for parasitoids or prey for predators. These volatile compounds act as messengers within or between insect species, inducing particular behaviours, such as the localisation of a source of food, the orientation to an adequate oviposition site, the selection of a suitable breeding site and the localisation of hosts or prey. In this sense, bacteria have been shown to play an important role in the production of volatile compounds which ones act as semiochemicals. This review, focusing on the semiochemically mediated interactions between bacteria and insects, highlights that bacterial semiochemicals act as important messengers for insects. Indeed, in most of the studies reported here, insects respond to specific volatiles emitted by specific bacteria hosted by the insect itself (gut, mouthparts, etc.) or present in the natural environment where the insect evolves. Particularly, bacteria from the families Enterobacteriaceae, Pseudomonaceae and Bacillaceae are involved in many interactions with insects. Because semiochemicals naturally produced by bacteria could be a very interesting option for pest management, advances in this field are discussed in the context of biological control against insect pests.     

People's Perception About Participatory Developmental Programs: Lessons from the Mountain Risk Engineering Program in the Indian Central Himalaya

The Indian Himalayan Region (IHR) is suffering from environmental degradation due to population pressure and infra-structural needs. This is coupled with a natural setting, which creates problems of accelerated soil erosion and mass wasting. In view of these environmental difficulties and the growing concern for effective restoration, there has become an urgent need for multi-disciplinary coordinated improvement schemes. The mitigation of risk arising from hazardous mass wasting processes, through a careful and systematic approach, has helped in the development of the concept of Mountain Risk Engineering (MRE). The MRE practices involve an integrated approach to solving the infra-structural engineering problems of hilly and mountainous areas through environmentally conscious cost-effective and site-specific designs. However, the role of people's participation is extremely crucial for the success of such programs. This paper analyzes the perception of the local people about the approaches adopted in MRE participatory developmental programs and throws light on the intricacies of peoples' participation.