An improvement selection methodology for key performance indicators

Key performance indicators (KPIs) are critical measures for determining the health of a manufacturing plant in relationship to the plant’s goals. In today’s competitive environment, manufacturers cannot be careless about their business; in fact, they must ensure that their KPIs are effective and use them to make improvements when necessary. This paper describes a method for suggesting improvements to a manufacturer’s KPIs, based on the results achieved from a workshop to score the KPI on a number of predefined criteria. The approach uses a prospect theory approach to weight the scoring. Different problem formulations were derived that allow for both recommendations for improvements and the recommendations for disinvestments to over-performing KPIs. The authors applied the developed approach to two workshop outputs, each from independent manufacturers, and the results highlighted the significant difference between the two manufacturers in terms of improvement priorities and KPI assessment. The optimal improvement suggestions were compared to those found through a fast heuristic. It was determined that given the underlying assumptions of the approach that the heuristic solutions were just as adequate as the optimal ones.     

Heat wave vulnerability and exposure mapping for Osaka City,Japan

Heat waves and heat-related stresses are increasing environmental concerns in urban areas. The impact of heat waves is dependent on the intensity and duration of each event and on underlying environmental and socio-demographic factors which influence population vulnerability. In order to develop effective adaptation strategies, it is important to develop a method to clearly identify the most vulnerable areas based on these factors. The purpose of this study is to develop and map a heat wave vulnerability index combined with heat exposure analysis to identify areas where interventions can be targeted. The vulnerability index was derived from a principle component analysis of eight key variables that influence heat wave vulnerability. Eight proxy measures of vulnerability were obtained from 2010 census and land-use data for the 1904 census districts of Osaka City. Three principle components explained >77 % of the variance (age, employment and education; social isolation; density and lack of green space). The components were combined and weighted to produce a vulnerability score for each census district. The vulnerability scores ranged from 0 to 106, were categorised into eight vulnerability levels and were overlaid with fine-scale air temperature observations. The resulting output identified the distribution of population vulnerability and exposure. This assessment of vulnerability, combining exposure and sensitivity components, can provide precedent for efficient, targeted action to be taken to reduce the impact of heat waves at present and under climate change.     

Think Global,Buy National: CSR,Cooperatives and Consumer Concerns in the Norwegian Food Value Chain

In a world where issues of food safety and food security are increasingly important, the social responsibility of central actors in the food chain—producers and the main grocery chains—becomes more pressing. As a response, these actors move from implicitly assuming social responsibilities implied in laws, regulations and ethical customs, towards explicitly expressing social responsibilities. In this paper, we discuss the ethical values relevant for the social responsibility of central food producers and retailers in Norway, one of the most subsidized and protected areas of food production in the world. How do the actors perceive and express their social responsibility, and—given their position in the local, national and global market—how should they handle these responsibilities? We analyze Tine and Nortura, two producers owned by farmer cooperatives with market regulator function, as well as Coop—a dominant grocery chain in Norway, with basis in the same public ownership model as the farmer-owned cooperative producers. While the complex roles of these key actors in the Norwegian food market have been criticized from several angles, we argue that these multifaceted roles put them in a good position to promote informed consumer choices in a globalized market.     

Choosing rewarding flowers; perceptual limitations and innate preferences influence decision making in bumblebees and honeybees

Flowers exhibit great intra-specific variation in the rewards they offer. At any one time, a significant proportion of flowers often contain little or no reward. Hence, foraging profitably for floral rewards is problematic and any ability to discriminate between flowers and avoid those that are less rewarding will confer great advantages. In this study, we examine discrimination by foraging bees among flowers of nasturtium, Tropaeolum majus. Bee visitors included carpenter bees, Xylocopa violacea, which were primary nectar robbers; honeybees, Apis mellifera, which either acted as secondary nectar robbers or gathered pollen legitimately and bumblebees, Bombus hortorum, which were the only bees able to gather nectar legitimately. Many flowers were damaged by phytophagous insects. Nectar volume was markedly lower in flowers with damaged petals (which were also likely to be older) and in flowers that had nectar-robbing holes. We test whether bees exhibit selectivity with regards to the individual flowers, which they approach and enter, and whether this selectivity enhances foraging efficiency. The flowers approached (within 2 cm) by A. mellifera and B. hortorum were non-random when compared to the floral population; both species selectively approached un-blemished flowers. They both approached more yellow flowers than would be expected by chance, presumably a reflection of innate colour preferences, for nectar standing crop did not vary according to flower colour. Bees were also more likely to accept (land on) un-blemished flowers. A. mellifera gathering nectar exhibited selectivity with regards to the presence of robbing holes, being more likely to land on robbed flowers (they are not able to feed on un-robbed flowers). That they frequently approached un-robbed flowers suggests that they are not able to detect robbing holes at long-range, so that foraging efficiency may be limited by visual acuity. Nevertheless, by using a combination of long-range and short-range selectivity, nectar-gathering A. mellifera and B. hortorum greatly increased the average reward from the flowers on which they landed (by 68% and 48%, respectively) compared to the average standing crop in the flower population. Overall, our results demonstrate that bees use obvious floral cues (colour and petal blemishes) at long-range, but can switch to using more subtle cues (robbing holes) at close range. They also make many mistakes and some cues used do not correlate with floral rewards.     

Recent changes in flood preparedness of private households and businesses in Germany

Using the focusing event framework, a comprehensive analysis of private households’ and businesses’ preparedness was undertaken in the aftermath of the 2002 and 2006 flood events on the Elbe River in Germany. In August 2002, preparedness of households (n = 235) and businesses (n = 103) was low: 30% of the households and 54% of the businesses took no precautionary measures before the flood event. Many undertaken emergency measures were ineffective, since only 26% of all households knew how to react when the flood warning came, and only 9% of businesses had an emergency plan in place. Due to this extreme flood, double-loop learning occurred in many households and businesses, so that many did implement precautionary measures. The distribution of adopted precautionary measures for households fits well to Preisendörfer’s low-cost hypothesis, but does not apply for businesses. Only 10% of the households (n = 112), but still 29% of the businesses (n = 41) were unprepared before the flood in 2006. Significant improvement in flood preparedness activities is still necessary. Particularly for businesses, regulatory programs and programs encouraging proactive behaviour should be implemented. The focusing event framework proofed to be a useful tool for a differentiated analysis of the responses to and learning due to a disaster also in the commercial and private sector.     

Suitability of passive sampling for the monitoring of pharmaceuticals in Finnish surface waters

The occurrence of five pharmaceuticals, consisting of four anti-inflammatory and one antiepileptic drug, was studied by passive sampling and grab sampling in northern Lake Päijänne and River Vantaa. The passive sampling was performed by using Chemcatcher® sampler with a SDB-RPS Empore disk as a receiving phase. In Lake Päijänne, the sampling was conducted during summer 2013 at four locations near the discharge point of a wastewater treatment plant and in the years 2013 and 2015 at four locations along River Vantaa. The samples were analyzed by liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS) in the multiple reaction monitoring mode. The concentrations of carbamazepine, diclofenac, ibuprofen, ketoprofen, and naproxen in Lake Päijänne determined by passive sampling ranged between 1.4–2.9 ng L^?1, 15–35 ng L^?1, 13–31 ng L^?1, 16–27 ng L^?1, and 3.3–32 ng L^?1, respectively. Similarly, the results in River Vantaa ranged between 1.2–40 ng L^?1, 15–65 ng L^?1, 13–33 ng L^?1, 16–31 ng L^?1, and 3.3–6.4 ng L^?1. The results suggest that the Chemcatcher passive samplers are suitable for detecting pharmaceuticals in lake and river waters.     

Rare earth element recovery potentials from end-of-life hybrid electric vehicle components in 2010–2030

Increasing attention is currently given to the management of end-of-life (EoL) hybrid electric vehicles (HEVs), because approximately two decades have passed since they were first introduced to the market. A HEV would be one of the largest consumers of rare earth elements (REEs), and hence represents the greatest potential for REE recovery in the future. The purpose of this study is to clarify the present and future recovery potential of REEs that are disposed of as EoL HEVs. This study first estimated the numbers of EoL HEVs during fiscal years (FYs) 2010–2030, and then clarified the potential for recovery of REEs from two HEV-specific components—the hybrid transmission and NiMH battery unit. The results suggest that 0.51–0.65 million HEVs will reach the EoL stage in FY2030, compared with only 11,000 HEVs in FY2010. As of FY2030, REE recovery potentials will increase to 220 tons and 2900 tons for EoL hybrid transmission and NiMH battery units, respectively. A total of 49,000 tons of REEs will be contained within HEV-specific components of HEVs still in use. Moreover, the potential for recovery of REEs from EoL hybrid transmissions and NiMH battery units is estimated to equal 35.4 and 92.1 % of respective demand.     

Sb release characteristics of the solid waste produced in antimony mining smelting process

Sb release characteristics of blast furnace slag, mining waste rock and tailing sand were investigated in static immersion and dynamic leaching test. These three kinds of waste samples were collected from the antimony mine in Lengshuijiang, China, produced in mining smelting process. Effects of solid/liquid ratio, sample size and pH of leaching solution on Sb release characteristics were inspected based on the analysis of scanning electron microscope, pH and EC of leachate. The optimal parameters for Sb leaching of each sample were analyzed. For blast furnace slag and mining waste rock, Sb release contents increased along with the decline of solid/liquid ratio. The maximum accumulative release contents were 42.13, 34.26 mg/kg at the solid/liquid ratio of 1:20. While Sb release content for tailing sand decreased first and then increased with the reduction of solid/liquid ratio. When the solid/liquid ratio was 1:5, the accumulative Sb release content reached the most (24.30 mg/kg). Sb release content of mining waste rock increased with the drop of leaching solution pH, with the highest accumulative release content of 26.01 mg/kg at pH 2.0. Sb release contents of blast furnace slag and tailing sand showed positive correlation with the variation of leaching solution pH. The maximum accumulative release contents of these two samples were 215.91 and 147.83 mg/kg, respectively, when leaching solution pH was 7.0. In summary, Sb release capacity of the three samples in descending order was tailing sand, blast furnace slag and mining waste rock. pH and EC of the leachate in dynamic test varied independently with the initial pH of leaching solution while showing close relationship with mineral hydrolysis in the waste.     

Effects of Compounded Curing Agents on Properties and Performance of Urea Formaldehyde Resin

The effects of three compounded curing agents on the properties and performance of the urea-formaldehyde (UF) resin were investigated in this study. The compounded curing agents were prepared by mixing ammonium chloride with hexamethylenetetramine, citric acid, and oxalic acid respectively at a ratio of 1:1, named N-H, N–CA, and N–OA, respectively. The curing process, crystallinity, and physical properties were measured, and the three-ply plywood was fabricated to measure its prepress strength, wet shear strength, and formaldehyde emission. Results showed that the compounded curing agents N–CA and N–OA enhanced the initial viscosity, crosslinking density and thermal stability of UF resin. Additionally, the prepress strength of the plywood bonded by UF resin with N–CA and N–OA increased by 82 and 111% respectively compared to the UF resin with NH₄Cl, and the wet shear strength increased by 14 and 16%, the formaldehyde emission decreased by 19 and 42% respectively. However, owing to the short pot-life of these curing agent limited their storage time, the curing agents N–CA and N–OA should be applied to fabricate plywood in winter for obtaining a better bond strength and a lower formaldehyde emission. While the UF resin with N–HT showed a suitable pot-life, so it could be applied to fabricate plywood in summer for long time storage and avoiding procuring problem.     

Biodegradation of Poly(Aspartic Acid-Itaconic Acid) Copolymers by Miscellaneous Microbes from Natural Water

Poly(aspartic acid-itaconic acid) copolymers (PAI) is a new scale inhibitor for water treatment. Thus, it is necessary to investigate its biodegradability. The biodegradability of PAI was investigated through CO₂ evolution tests under different conditions based on determination of carbon dioxide production. The investigation results showed that the degradation rate of PAI on day 10 and day 28 were respectively 38.7 and 79.5%, indicating that PAI was one kind of easily biodegradable scale inhibitors. With the increase in the content of itaconic acid in copolymerization process, the biodegradability of PAI was significantly reduced. In addition, the high biodegradability might be attributed to the existence of C–N bone-structure and more –COO–. Finally, Cu²⁺ could decrease the degradation percentage and the enzyme inhibition effect of Cu²⁺ was not the linear effect, but the “low-dosage effect”.