三峡水库135 m蓄水前后水体重金属环境健康风险评价

三峡水库135 m蓄水后,水体中各重金属的单因子污染指数和Nemerow综合污染指数均有不同程度的增大,特别是Pb污染应该引起重视.健康风险评价结果表明,成库前后非致癌有毒化学物质(Hg、Pb和Cu)所引起的健康危害的个人年风险为Pb＞Cu＞Hg,致癌物质对人体健康危害的个人年风险均大于非致癌物.各类污染物所致个人平均健康危害成库前后均低于国际辐射防护委员会(ICRP)推荐的标准,为可接受水平.     

高浓度氨氮废水好氧反硝化反应的基本条件

文章通过室内实验,对高浓度氨氮废水(垃圾渗滤液)间歇曝气,在只存在有机碳、无机氮的条件下进行好氧反硝化脱氮研究。实验结果表明:垃圾渗滤液中存在好氧反硝化土著微生物菌落;发生好氧反硝化的基本条件为在溶解氧充足的条件下间歇曝气;碳源不仅是厌氧反硝化所必须的,同样也是好氧反硝化的必要条件。     

用微孔填充理论研究活性炭对有机气体的吸附性能

用微孔填充理论研究了活性炭C40／4对丙酮、甲苯、二氯甲烷有机气体的吸附性能,测试了该活性炭对3种有机气体在不同温度下（288．15,293．15,298．15K）的吸附结果。用D—R方程处理了实验数据,建立了3种有机气体在活性炭C40／4上的等温吸附模型,并将实验测试值与理论预测值进行了比较。实验结果表明：微孔填充理论及D—R方程可很好地描述活性炭C40／4对有机气体的吸附性能,理论预测值与实验测试值的平均相对误差小于3％;有机气体分压较高时,由于发生毛细凝聚,理论预测值较实验测试值偏低。     

Optimization of bio-drying of kitchen waste: inoculation,initial moisture content and bulking agents

Journal of Material Cycles and Waste Management - Bio-drying has been proved to be a promising method for treatment of MSW (municipal solid waste) and sewage sludge due to its high energy...     

Lateral movement of soil fumigants 1,3-dichloropropene and chloropicrin from treated agricultural fields

The soil fumigants 1,3-dichloropropene (1,3-D) and chloropicrin (CP) are often used for controlling soil-borne plant pathogens and parasitic nematodes before reestablishing new vineyards and orchards. To evaluate crop safety and environmental risks with the replant fumigation, four field experiments were performed over 2 yr to examine 1,3-D and CP lateral movement away from the treated fields. Shank injection with or without a virtually impermeable film (V1F) was used in two vineyard fumigation experiments, and spot drip application without tarp cover was used in two orchard experiments. Results showed that 1,3-D and CP gases moved laterally to 6 m from the treated fields when the fumigants were applied by shank injection. The maximum 1,3-D or CP soil gas concentration at 6 m was approximately 10 ng cm(-3) when the fumigated plot was not cover with a tarp. With VIF, the measured maximum concentration increased to approximately 100 ng cm(-3). In the spot drip application, maximum 1,3-D and CP gas concentrations reached approximately 100 ng cm(-3) but at 1.5 m radial distance from the point of fumigant injection.     

Cracking the Achilles’ heel of energy performance contracting projects: the credit risk identification method for clients

ABSTRACT

A credit risk identification model is established to examine the credit status of Energy performance contracting (EPC) project clients (i.e., energy-using companies) in China based on rough set theory. The model is verified with data from 120 listed companies at different times. Study shows that lack of credit is one of the main obstacles to the implementation of EPC projects, and information asymmetry is the main reason for this lack of credit among potential clients in China. The credit risk identification method based on rough set theory can make up for the shortcomings of existing EPC projects in terms of credit risk identification, including redundant information and indicators, and unclear decision rules. Credit risk identification indicators of clients are dynamic. The research results can help energy service companies (ESCOs) determine the credit status of clients, facilitate cooperation between ESCOs and clients, and help explain the various dynamics of clients’ credit risk identification indicators over time.     

松花江水系有机污染的现状

本文介绍了GC、GC/MS、HPLC方法在分析松花江水系有机污染物中的应用。GC/MS、HPLC所用水样在现场处理,而TLC、GC样品在实验室处理。冬夏两次取样,共检出152种有机化合物,其中主要有机污染物55种,PAH_3占19％,氯化物占14％,芳烃占13％,其它占54％。     

新型纤维滤料的研究及应用

随着我国油田相继进入开发后期,传统的滤料及设备过滤精度已不能满足注水的要求。因此,研究并开发了具有一定抗油污能力的新型过滤材料,设计了新型的超精细过滤器系列产品。对滤料进行的室内实验结果表明,在开始过滤的近10h内,过滤后的水中含油量基本上满足注水的水质要求。在开始过滤的近20h内,滤层的水头损失随时间的变化较为平缓;随着过滤时间的延长,水头损失变化加剧。从现场实验可以看出,所设计的过滤器有良好的过滤性能和抗冲击能力。新型过滤材料的研究成功解决了油田含油污水精细过滤的问题,新型过滤器也是含油污水超精细过滤的理想产品。     

花键轴冷挤压成形工艺及模具设计

花键轴是机械中广泛使用的重要零件之一。制造工艺复杂,外观质量、尺寸精度、综合机械性能等要求高。采用冷挤压成形,可使成本降低、提高质量、使用可靠。此文对花键轴成形工艺,模具设计作了详细探讨。     

Influence of filtration velocity on DON variation in BAF for micropolluted surface water treatment

Biological aerated filters (BAFs) are widely used for the treatment of micropolluted surface water. However, the biological process produces dissolved organic nitrogen (DON), which, as precursors of nitrogenous disinfection by-products, pose potential threats to drinking water safety. Therefore, to control DON in BAF effluent, it is necessary to study the influence of BAF operation parameters on DON production. In this study, the influence of filtration velocity in a BAF on DON production was investigated. Under different filtration velocity (0.5, 2, and 4 m/h) conditions, profiles of DON concentrations along the media layer were measured. The profile at a filtration velocity of 0.5 m/h showed a decreasing trend, and the ones under filtration velocities of 2 and 4 m/h fluctuated in a small range (from 0.1 to 0.4 mg/L). Moreover, the relatively high filtration velocities of 2 and 4 m/h resulted in a lower level of DON concentration. Additionally, 3D excitation-emission matrix fluorescence spectroscopy was used to characterize DON. It is found that the patterns of DON at a relatively high filtration velocity condition (4 m/h) were obviously different from the ones under low filtration velocity conditions (0.5 and 2 m/h).