溶胶-凝胶Ag-Al2O3催化剂还原稀燃氮氧化物的研究

系统地研究了培烧条件、氧气浓度、C／N摩尔比等因素对溶胶-凝胶Ag(5)-Al2O3催化剂活性的影响。实验结果表明,氧气浓度对催化剂活性的影响表现为促进低温活性和抑制高温活性;催化剂的最佳焙烧条件为焙烧温度600℃和升温速率5C／min;催化剂的活性随着C／N摩尔比的降低而降低。此外,还考察了空速对Ag(5)-Al2O3催化剂活性的影响。结果表明,该催化剂在较大的空速范围内具有良好的活性。     

城市垃圾重金属污染及其治理研究进展

城市垃圾重金属污染及其治理是当前城市发展过程中急需解决的重大课题。本文分别从城市垃圾中重金属的来源、重金属污染及治理现状等方面综述了目前城市垃圾重金属污染方面的研究进展,指出了当前研究中存在的问题和今后的发展方向。     

黄磷诱发氧化水中苯酚的机理研究

运用衍生化气相色谱法和GC/MS对黄磷诱发氧化水中苯酚的降解产物进行了定性、定量分析,并初步探讨了反应机理。实验结果表明,在所研究的黄磷诱发氧化条件下,苯酚首先氧化成中间产物,然后进一步降解,反应的非挥发性产物以羧酸为主。在合适的反应条件下,苯酚去除率可达95％以上,降解表现一级反应特征。文章还探讨了苯酚的起始浓度、磷和酚的比例及温度对苯酚去除率和降解深度的影响。     

皂土对CuCl_2的吸附性能

研究了CuCl2在荷结构负电荷皂土上的吸附性能,考察了pH、无机以及有机添加剂等因素的影响,并结合IR和XRD实验结果探讨了吸附机理。研究表明,皂土对CuCl2有很强的吸附能力,其吸附动力学和吸附等温线分别符合准二级速率方程和Langmuir方程。初始pH增大,吸附量增加。无机以及有机添加剂均能能明显抑制吸附。Cu2＋在皂土上的吸附层在微观上可分为因化学键合作用而形成的内络合层和因静电作用而形成的外络合层。     

Cr(Ⅵ)在Mg-Al型类水滑石上的脱附性能研究

研究了Cr(Ⅵ)在带结构正电荷的Mg-Al型类水滑石(HTlc)上的脱附性质,考察了多种脱附剂的脱附性能,研究了脱附剂种类、浓度、pH值和脱附时间等因素的影响。实验表明,脱附平衡时间比吸附平衡时间稍长,不同的脱附剂脱附效果不一样,对同一种脱附剂来说,随着脱附剂浓度的增大,脱附量增大;随着pH值的升高,脱附量总体呈上升趋势。     

皂土对CuCl2的吸附性能

研究了CuCl2在荷结构负电荷皂土上的吸附性能,考察了pH、无机以及有机添加剂等因素的影响,并结合IR和XRD实验结果探讨了吸附机理。研究表明,皂土对CuCl2有很强的吸附能力,其吸附动力学和吸附等温线分别符合准二级速率方程和Langmuir方程。初始pH增大,吸附量增加。无机以及有机添加剂均能能明显抑制吸附。Cu2+在皂土上的吸附层在微观上可分为因化学键合作用而形成的内络合层和因静电作用而形成的外络合层。     

膜蒸馏处理糖精钠生产废水

采用直接接触式膜蒸馏(DCMD)工艺处理糖精钠生产废水。分析了经过活性炭吸附预处理前后,膜蒸馏连续循环运行的效果。实验结果表明,未经预处理的废水在膜蒸馏过程中,废水中所含有机物不仅导致膜材料的润湿,引起产水电导率升高及膜孔润湿,促进盐晶体在膜表面附着,使产水通量下降。经吸附预处理后,膜蒸馏过程中产水通量介于10.40～11.24 kg/(m2.h)。吸附预处理能有效减缓产水通量的衰减,提高产水水质。废水经过活性炭预处理后进行膜蒸馏浓缩处理,当浓缩倍数达到5倍时,通量保持在10.55 kg/(m2.h)左右;产水水质稳定,截留率在99.5%以上。研究结果表明,吸附-膜蒸馏工艺可以应用于糖精钠生产废水的回用处理,有明显的应用前景。     

土壤渗滤介质系统去除雨水径流污染物

利用昆明当地的土壤在室内填装一个土柱渗滤系统,使用配水浓度模拟昆明市区雨水径流污染物浓度,进行去除雨水径流污染物的实验研究,考察系统对COD、TN、NH4＋、NO3^-、NO2^-和TP的去除效果。实验结果表明,该土壤渗滤系统对COD平均去除率为82．04％,对TN的平均去除率为22．64％,对NH;平均去除率为94．26％,但是对NO3^-、NO2^-去除效果较差,对TP平均去除率为96．95％;另外,系统长期运行导致下渗速度降低,出水效果反而变好。     

Partition of iodine (¹²⁹I and ¹²⁷I) isotopes in soils and marine sediments

Natural organic matter, such as humic and fulvic acids and humin, plays a key role in determining the fate and mobility of radioiodine in soil and sediments. The radioisotope ¹²⁹I is continuously produced and released from nuclear fuel reprocessing plants, and as a biophilic element, its environmental mobility is strongly linked to organic matter.Due to its long half-life (15.7 million years), ¹²⁹I builds up in the environment and can be traced since the beginning of the nuclear era in reservoirs such as soils and marine sediments. Nevertheless, partition of the isotope between the different types of organic matter in soil and sediment is rarely explored. Here we present a sequential extraction of ¹²⁹I and ¹²⁷I chemical forms encountered in a Danish soil, a soil reference material (IAEA-375), an anoxic marine sediment from Southern Norway and an oxic sediment from the Barents Sea. The different forms of iodine are related to water soluble, exchangeable, carbonates, oxides as well as iodine bound to humic acid, fulvic acid and to humin and minerals. This is the first study to identify ¹²⁹I in humic and fulvic acid and humin. The results show that 30-56% of the total ¹²⁷I and 42-60% of the total ¹²⁹I are associated with organic matter in soil and sediment samples. At a soil/sediment pH below 5.0-5.5, ¹²⁷I and ¹²⁹I in the organic fraction associate primarily with the humic acid while at soil/sediment pH > 6 ¹²⁹I was mostly found to be bound to fulvic acid. Anoxic conditions seem to increase the mobility and availability of iodine compared to oxic, while subaerial conditions (soils) reduces the availability of water soluble fraction compared to subaqueous (marine) conditions.     

Capability of novel ZnFe₂O₄ nanotube arrays for visible-light induced degradation of 4-chlorophenol

Highly ordered ZnFe₂O₄ nanotube arrays were successfully prepared by anodic aluminum oxide templates from sol-gel solution. The results from environmental scanning electron microscopy and X-ray photoemission spectroscopy indicated that the as-prepared samples were vertically aligned spinel ZnFe₂O₄ nanotube arrays, and the nanotubes were uniform along the axial direction with an average diameter of approximately 200 nm. The absorption edge of ZnFe₂O₄ nanotube arrays shifted to a higher energy in the UV-Vis absorption spectrum compared with that of ZnFe₂O₄ nanoparticles film. The synthesized ZnFe₂O₄ nanotube arrays exhibited excellent photocatalytic capability for degradation of 4-chlorophenol under visible-light irradiation. The main intermediate degradation species of 4-chlorophenol identified by liquid chromatography-mass technique were benzoquinone, hydroquinone, hydroxybenzoquinone and 2-peroxy-o-dihydroxybenzene. The degradation pathways of 4-chlorophenol under visible-light irradiation was derived and discussed by interpreting the observations of the intermediate species in the photocatalytic reactions.