Seasonal variations and source profile of <Emphasis Type="Italic">n</Emphasis>-alkanes in particulate matter (PM<Subscript>10</Subscript>) at a heavy traffic site,Delhi

Delhi is one of the most polluted cities in the world. The generation of aerosols in the lower atmosphere of the city is mainly due to a large amount of natural dust advection and sizable anthropogenic activities. The compositions of organic compounds in aerosols are highly variable in this region and need to be investigated thoroughly. Twenty-four-hour sampling to assess concentrations of n-alkanes (ng/m³) in PM₁₀ was carried out during January 2015 to June 2015 at Indira Gandhi Delhi Technical University for Women (IGDTUW) Campus, Delhi, India. The total average concentration of n-alkanes, 243.7 ± 5.5 ng/m³, along with the diagnostic tools has been calculated. The values of CPI₁, CPI₂, and CPI₃ for the whole range of n-alkanes series, petrogenic n-alkanes, and biogenic n-alkanes were 1.00, 1.02, and 1.04, respectively, and C _max were at C₂₅ and C₂₇. Diagnostic indices and curves indicated that the dominant inputs of n-alkanes are from petrogenic emissions, with lower contribution from biogenic emissions. Significant seasonal variations were observed in average concentrations of n-alkanes, which is comparatively higher in winter (187.4 ± 4.3 ng/m³) than during the summer season (56.3 ± 1.1 ng/m³).     

Groundwater Quality Assessment of Tehsil Kheragarh, Agra (India) with Special Reference to Fluoride

Fluoride concentration and other parameters in groundwater from 261 villages in Tehsil Kheragarh of District Agra were assessed and attempts were made to observe the relationship between fluoride and other water quality parameters. Of 658 groundwater samples (collected from separate sources) analysed for fluoride, 27% were in the range of 0–1.0 mg/L, 25% in 1.0–1.5 mg/L, 32% in1.5–3.0 mg/L and 16% above 3.0 mg/L. The highest fluoride concentration recorded was 12.80 mg/L. Significant correlation of fluoride with pH, alkalinity, Na, SiO₂ and PO₄ were observed. Factor analysis was also attempted in order to identify the contributing sources.     

Traffic generated non-exhaust particulate emissions from concrete pavement: A mass and particle size study for two-wheelers and small cars

This study aimed to understand the non-exhaust (NE) emission of particles from wear of summer tire and concrete pavement, especially for two wheelers and small cars. A fully enclosed laboratory-scale model was fabricated to simulate road tire interaction with a facility to collect particles in different sizes. A road was cast using the M-45 concrete mixture and the centrifugal casting method. It was observed that emission of large particle non exhaust emission (LPNE) as well as PM₁₀ and PM_2.5 increased with increasing load. The LPNE was 3.5 mg tire⁻¹ km⁻¹ for a two wheeler and 6.4 mg tire⁻¹ km⁻¹ for a small car. The LPNE can lead to water pollution through water run-off from the roads. The contribution of the PM₁₀ and PM_2.5 was smaller compared to the LPNE particles (less than 0.1%). About 32 percent of particle mass of PM₁₀ was present below 1 μm. The number as well as mass size distribution for PM₁₀ was observed to be bi-modal with peaks at 0.3 μm and 4–5 μm. The NE emissions did not show any significant trend with change in tire pressure.     

Stand-alone hybrid energy system for sustainable development in rural India

Renewable energy system such as solar, wind, small hydro and biogas generators can be used successfully in rural off-grid locations where grid connection is not possible. The main objectives of this study are to examine which configuration is the most cost-effective for the village. One renewable energy model has been developed for supplying electric power for 124 rural households of an off-grid rural village in eastern India. The load demand of the village was determined by the survey work, and the loads were divided into three sub-heads such as primary load I, primary load II and deferred load. Locally available energy sources such as solar radiation and biogas derived from cow dung and kitchen wastes were used as sensitivity variables. This study is unique as it has not considered any diesel generator for supplying unmet electricity to the households; rather it completely depends on locally available renewable resources. Here in this paper, two different models were taken and their cost and environmental benefit were discussed and compared. The net present cost, levelised cost of energy and operating cost for various configurations of models were determined. The minimum cost of energy of $0.476/kWh with lowest net present cost of $386,971 and lowest operating cost ($21,025/year) was found with stand-alone solar–biogas hybrid system.     

Microbial siderophores and their potential applications: a review

Siderophores are small organic molecules produced by microorganisms under iron-limiting conditions which enhance the uptake of iron to the microorganisms. In environment, the ferric form of iron is insoluble and inaccessible at physiological pH (7.35–7.40). Under this condition, microorganisms synthesize siderophores which have high affinity for ferric iron. These ferric iron-siderophore complexes are then transported to cytosol. In cytosol, the ferric iron gets reduced into ferrous iron and becomes accessible to microorganism. In recent times, siderophores have drawn much attention due to its potential roles in different fields. Siderophores have application in microbial ecology to enhance the growth of several unculturable microorganisms and can alter the microbial communities. In the field of agriculture, different types of siderophores promote the growth of several plant species and increase their yield by enhancing the Fe uptake to plants. Siderophores acts as a potential biocontrol agent against harmful phyto-pathogens and holds the ability to substitute hazardous pesticides. Heavy-metal-contaminated samples can be detoxified by applying siderophores, which explicate its role in bioremediation. Siderophores can detect the iron content in different environments, exhibiting its role as a biosensor. In the medical field, siderophore uses the “Trojan horse strategy” to form complexes with antibiotics and helps in the selective delivery of antibiotics to the antibiotic-resistant bacteria. Certain iron overload diseases for example sickle cell anemia can be treated with the help of siderophores. Other medical applications of siderophores include antimalarial activity, removal of transuranic elements from the body, and anticancer activity. The aim of this review is to discuss the important roles and applications of siderophores in different sectors including ecology, agriculture, bioremediation, biosensor, and medicine.     

Transformation of atmospheric ammonia and acid gases into components of PM<Subscript>2.5</Subscript>: an environmental chamber study

Introduction  

The kinetics of the transformation of ammonia and acid gases into components of PM_2.5 has been examined. The interactions of existing aerosols and meteorology with the transformation mechanism have also been investigated. The specific objective was to discern the kinetics for the gas-to-particle conversion processes where the reactions of NH₃ with H₂SO₄, HNO₃, and HCl take place to form (NH₄)₂SO₄, NH₄NO₃, and NH₄Cl, respectively, in PM_2.5.     

Organic matter source discrimination by humic acid characterization: Synchronous scan fluorescence spectroscopy and Ferrate(VI)

In this study, seven soil and sedimentary humic acid samples were analyzed by synchronous scan fluorescence (SSF) spectroscopy. The spectra of these humic acids were compared to each other and characterized, based on three major SSF peaks centered at approximately 281, 367 and 470 nm. Intensity ratios were calculated based on these peaks that were used to numerically assist in source discrimination. All humic acid samples were then reacted with Ferrate(VI) and were again analyzed with SSF. Upon the addition of Ferrate(VI) SSF spectra were obtained which more readily differentiated humic acid source. This method will assist geochemists and water management districts in tracing sources of organic matter to receiving water bodies and may aid in the elucidation of the chemical nature of humic acids.