Forest fragmentation in the Himalaya: A Central Himalayan case study

Administrative divisions in the Great Southern Watershed of the Himalaya are diverse in terms of population density and forest cover. This study analyzed the spatial patterns of different attributes in the different Indian states and Himalayan kingdoms, and explored the extent and patterns of forest fragmentation in a Himalayan landscape as a case study. Of the total landscape in the case study area (3167 km²), 41% was fragmented. Homogenous landscape (59%) includes either continuous natural vegetation or a village landscape. Presence of two forest patches (38% of the total fragmented area) at a unit scale of about 0.5 km² (525 × 525 m) was the most commonly occurring pattern but, in some parts, up to 13 patches were observed. Fragmentation of vegetation was visible even at smaller scales of landscape analysis. At a scale of 75 × 75 m, land division into three patches was observed. With an increase in the unit area of landscape analysis the number of patches per unit land area and the total fragmented area also increased. The forests that escaped fragmentation were either inaccessible to humans or had rigorous legal protection. Anthropogenic activities appeared to be one of the factors responsible for fragmentation but, natural factors also contributed.     

Conflict resilience among community forestry user groups: experiences in Nepal

This paper explores the impact of violent conflict in Nepal on the functioning of community forestry user groups (CFUGs), particularly those supported by the Livelihoods and Forestry Programme, funded by the United Kingdom's Department for International Development (DFID). The key questions are: (i) what explains the resilience of CFUGs operating at the time of conflict?; (ii) what institutional arrangements and strategies allowed them to continue working under conflict conditions?; and (iii) what lessons can be drawn for donor‐supported development around the world? The study contributes to other research on the everyday experiences of residents of Nepal living in a period of conflict. It suggests that CFUG resilience was the result of the institutional set up of community forestry and the employment of various tactics by the CFUGs. While the institutional design of community forestry (structure) was very important for resilience, it was the ability of the CFUGs to support and use it effectively that was the determining factor in this regard.     

High seasonal variation of atmospheric C and particle concentrations in Delhi,India

The highly populated Indian regions are currently in a phase of rapid economic growth resulting in high emissions of carbonaceous aerosols. This leads to poor air quality and impact on climate. The chemical composition of carbonaceous aerosols has rarely been studied in industrial areas of India. Here, we investigated carbonaceous aerosols in particulate matter (PM) monthly in the industrial area of Delhi in 2011. The concentrations of organic C and elemental C in PM₁₀ fraction were analyzed. Results show a clear seasonal variability of organic and elemental C. PM₁₀ ranged 95.9–453.5 μg m^?3, organic C ranged 28.8–159.4 μg m^?3, and elemental C ranged 7.5–44.0 μg m^?3; those values were higher than reported values. Organic and elemental C were correlated with each other in pre-monsoon and winter seasons, implying the existence of similar emission sources such as coal combustion, biomass burning and vehicular exhaust. The annual average contribution of total carbonaceous aerosols in PM₁₀ was estimated as 62 %.     

Ruthenium-driven catalysis for sustainable water decontamination: a review

Environmental Chemistry Letters - The worldwide demand for clean water is rising worldwide, yet wastewater decontamination is actually limited by the presence of refractory organic and inorganic...     

Heavy Metal Transport in the Hindon River Basin, India

Total mass transfers of heavy metal in dissolved and particulate form has been determined in the downstream section of river Hindon, an important tributary of river Yamuna (India). The contribution of different point sources to the river Hindon has also been assessed. The river Kali has the largest contribution to the river Hindon. The highest metal loads were related to the highest flow of the river and thereby increased both by surface runoff and sediment resuspension. The contribution of monsoon months to the total transported load was also calculated and it was observed that monsoon months contributes more than 40% of total loading annually for all the metals. The metal fluxes from the river Hindon were compared with other rivers of Indian sub-continent.     

Overcoming growing water scarcity: Exploring potential improvements in water productivity in India

Improvements in water productivity (WP) are often suggested as one of the alternative strategies for overcoming growing water scarcity in India. This paper explores the potential improvements in WP of food grains at district level, which currently varies between 0.11 and 1.01 kilogram per cubic metre (kg/m³), in the 403 districts that account for 98% of the total production of food grains. The paper first finds the maximum yield function conditional on consumptive water use (CWU) and then explores the potential improvements in WP by: (a) bridging the gap between actual and maximum yield while keeping CWU constant; and (b) changing the maximum yield by adjusting the CWU using supplementary or deficit irrigation. Deficit irrigation in some areas may decrease yield but can increase production if land availability is not a constraint. A large potential exists for bridging the yield gap in irrigated areas with CWU between 300 and 475 mm. Of the 222 districts that fall under this category, a 50% reduction in yield gap alone could increase production by 100 million tonnes (Mt) without increasing CWU. Supplementary irrigation can increase yield and WP in rain‐fed and irrigated areas of 266 and 16 districts with CWU is below 300 mm. Deficit irrigation in irrigated areas of 185 districts with CWU above 475 mm could increase yield, WP and production. Decreasing CWU in irrigated areas with CWU between 425 and 475 mm reduces yield slightly, but if availability of land is not a constraint then the benefits due to water saving and production increases could exceed the cost.     

Assessment of noise pollution during Deepawali festival in a small township of Haridwar City of Uttarakhand,India

In the present study, noise levels were measured in two different areas within Haridwar City viz., residential and commercial area, on festive day and non-festive day (after) of Deepawali in November 2007. The results show that there is an enhanced pressure of noise during the festival of light. The average noise level on festive day shows a rise of 29.6 and 18.1% when compared to non-festive day, respectively, for residential and commercial area.     

Role of physiographic factors in distribution of <Emphasis Type="Italic">Abies pindrow</Emphasis> (<Emphasis Type="Italic">Silver Fir</Emphasis>) along an altitudinal gradient in Himalayan temperate forests

We have made an attempt to understand the significance of physiographic factors viz., altitude, aspect, slope and soil characteristics in determining the structure, composition, growth behavior and distribution of Himalayan Silver Fir (Abies pindrow Spach.) through a comparative analysis of two temperate forests. The occurrence of highest density (370 and 225 ind/ha), importance value index (213.10 and 190.60) and total basal cover (TBC; 95.72 and 51.15 m²/ha) values along with the availability of higher organic carbon (6.53 and 4.47%), nitrogen (N; 0.73 and 0.44%) and potassium (K; 621 and 319 ppm) contents in the soils just beneath the hilltops (2,650–2,800 and 2,550–2,650 m asl), on steeper slopes (45°–50° and 42°–45°) and North-East aspects have revealed better growth of A. pindrow on both the sites. Stem density positively correlated with TBC (0.771), Shannon–Wiener diversity index (H′; 0.879), OC (0.601), N (0.758) and K (0.752), whereas TBC has shown significant positive relationship with H′ (0.894), K (0.793) and N (0.716). Similarly, H′ has also shown significant positive correlation with slope (0.721), K (0.855) and N (0.791). Interestingly, positive correlation of altitude with stem density (0.557) and of slope with TBC (0.608) was noticed in the distribution of A. pindrow individuals.     

Development of an analytical method for analysis of flubendiamide, des-iodo flubendiamide and study of their residue persistence in tomato and soil

Flubendiamide is a new insecticide that has been found to give excellent control of lepidopterous pests of tomato. This study has been undertaken to develop an improved method for analysis of flubendiamide and its metabolite des-iodo flubendiamide and determine residue retention in tomato and soil. The analytical method developed involved extraction of flubendiamide and its metabolite des-iodo flubendiamide with acetonitrile, liquid-liquid partitioning into hexane-ethyl acetate mixture (6:4, v v?1) and cleanup with activated neutral alumina. Finally the residues were dissolved in gradient high pressure liquid chromatography (HPLC) grade acetonitrile for analysis by HPLC. The mobile phase, acetonitrile-water at 60:40 (v v?1) proportion and the wavelength of 235 nm gave maximum peak resolution. Using the above method and HPLC parameters described, nearly 100 % recovery of both insecticides were obtained. There was no matrix interference and the limit of quantification (LOQ) of the method was 0.01 mg kg?1. Initial residue deposits of flubendiamide on field-treated tomato from treatments @ 48 and 96 g active ingredient hectare?1 were 0.83 and 1.68 mg kg?1, respectively. The residues of flubendiamide dissipated at the half-life of 3.9 and 4.4 days from treatments @ 48 and 96 g a.i. ha?1, respectively and persisted for 15 days from both the treatments. Des-iodo flubendiamide was not detected in tomato fruits at any time during the study period. Residues of flubendiamide and des-iodo flubendiamide in soil from treatment @ 48 and 96 g a.i. ha?1 were below detectable level (BDL, < 0.01 mg kg?1) after 20 days. Flubendiamide completely dissipated from tomato within 20 days when the 480 SC formulation was applied at doses recommended for protection against lepidopterous pests.     

Distribution and fate of persistent organochlorine pesticides in coastal marine environment of Mumbai

Multi-compartment monitoring of residue levels of OCPs in coastal marine environment of Mumbai has been studied. The concentration of total HCHs in seawater varied from 0.16 to 15.92 ng/L and concentrations of total DDT varied from 3.01 to 33.21 ng/L. The total HCH concentration in the sediment samples was in the range of 3.8 to 16.2 ng/g. Gamma-HCH contributed almost 55% to the total HCH. In sediment samples the DDT has higher mean concentration in comparison to its metabolite DDE and DDD. The concentration of total HCHs in different marine species varied from 0.87 to 33.73 ng/g and concentrations of total DDT varied from 0.38 to 34.1 ng/g. The variation in the beta-HCH in different compartments is not significant and this could be due to the high persistence and metabolically inactive nature of this isomer. The alpha-HCH is found to be more dominant in fish samples whereas the gamma-HCH is major contributor in the sediment samples.