Impact of copper on haematological profile of freshwater fish, Channa punctatus

The present study was to evaluate heavy metal toxicity stress symptoms in fish blood during long-term exposure of sublethal concentration of copper sulphate (CuSO4). The effects of copper on various heamatological parameters were evaluated exposing Indian fresh water fish, Channa punctatus to a sub-lethal concentration of copper sulphate (0.36 mg l(-1)) for different periods. Exposure of fish to copper showed a significant decrease in the haemoglobin (Hb) content from 10.73 to 6.60%, red blood cells (RBC) from 2.86 to 1.84 x 10(6)/mm3 and packed cell volume (PCV) from 31.00 to 23.33% at the end of 45th day as compared to control. Whereas the white blood cells (WBC) increased from 60.00 to 92.48 x10(3)/mm3, clotting time (CT) from 27.66 to 43.00 second, erythrocyte sedimentation rate from 5.0 to 13.66 mm/hr and mean corpuscular volume from 108.11 to 126.85 cmu, significantly, with increase in exposure periods. Although mean corpuscular haemoglobin concentration (MCHC) and mean corpuscular haemoglobin (MCH) values showed significant increase during 15 and 30 days exposures, both the values were found significantly increased at the end of the experimental period. The differential leucocytes count (DLC) showed a significant increase in the populations of lymphocytes and eosinophils, whereas neutrophils, monocytes and basophiles were found decreased after exposure to copper.     

Chemical properties of soils in relation to forest composition in moist temperate valley slopes of Garhwal Himalaya, India

The present study was undertaken in moist temperate forest of Mandal-Chopta area in the Garhwal region of Uttarakhand, India. The aim of the present study was to assess the chemical properties of soils in relation to the forest structure and composition. Twelve forest types according to the altitude, slope aspect, and species composition were selected for the study. Chemical properties of the soil, i.e., total nitrogen (N), available phosphorus (P), available potassium (K), organic carbon (C), soil organic matter (SOM), pH and C:N ratios were analyzed for three different depths viz., (i) ??Upper?? (0?C10?cm), (ii) ??Middle?? (11?C30?cm), and (iii) ??Lower?? (31?C60?cm) in all the selected forest types. Phytosociological and diversity parameters viz. total basal cover (Gha^?1), stem density (Nha^?1), tree species richness (SR), Simpson concentration of dominance and Shannon?CWiener diversity index ( $ \overline{\rm H} $ ) were also calculated for each forest type. Values of N, P, K, C, SOM, C:N ratio and pH ranged from 0.17 to 0.45?%, 2.73 to 20.17?ppm, 40.67 to 261.17?ppm, 2.29 to 4.31?%, 3.95 to 7.43?%, 8.12 to 14.49 and 5.47 to 6.67, respectively. N showed a positive relationship with C and K. P was positively correlated with C and negatively correlated with altitude. P was higher in the soil of lower horizons of all the forest types. K was found to be positively correlated with altitude, C and N. pH of all the forest types was slightly acidic. C was comparatively higher in mixed broad-leaved forest types. No relationship between altitude and C was observed, which may be due to different composition of forest types along the altitudinal gradient and their differential decomposition rates. C content decreased with the depth of the soil. C showed positive correlation with N, P, and K. N showed a positive correlation with Gha^?1. K showed a negative correlation with SR and $ \overline{\rm H} $ . P showed no relationship with the phytosociological parameters. This study also provides the comparisons between the results of chemical analysis of the present study with numerous other previous studies in the temperate Himalayan region of the Uttarakhand. The values of soil chemical properties of the present study in most of the forest types are on the higher end than the values previously recorded for the other similar forests of the region. The possible reason being luxuriant vegetation and undisturbed nature of these forest types, which is evident from higher values of diversity and other phytosociological parameters.     

Heavy Metal Transport in the Hindon River Basin, India

Total mass transfers of heavy metal in dissolved and particulate form has been determined in the downstream section of river Hindon, an important tributary of river Yamuna (India). The contribution of different point sources to the river Hindon has also been assessed. The river Kali has the largest contribution to the river Hindon. The highest metal loads were related to the highest flow of the river and thereby increased both by surface runoff and sediment resuspension. The contribution of monsoon months to the total transported load was also calculated and it was observed that monsoon months contributes more than 40% of total loading annually for all the metals. The metal fluxes from the river Hindon were compared with other rivers of Indian sub-continent.     

Conflict resilience among community forestry user groups: experiences in Nepal

This paper explores the impact of violent conflict in Nepal on the functioning of community forestry user groups (CFUGs), particularly those supported by the Livelihoods and Forestry Programme, funded by the United Kingdom's Department for International Development (DFID). The key questions are: (i) what explains the resilience of CFUGs operating at the time of conflict?; (ii) what institutional arrangements and strategies allowed them to continue working under conflict conditions?; and (iii) what lessons can be drawn for donor‐supported development around the world? The study contributes to other research on the everyday experiences of residents of Nepal living in a period of conflict. It suggests that CFUG resilience was the result of the institutional set up of community forestry and the employment of various tactics by the CFUGs. While the institutional design of community forestry (structure) was very important for resilience, it was the ability of the CFUGs to support and use it effectively that was the determining factor in this regard.     

Residual behavior and risk assessment of flubendiamide on tomato at different agro-climatic conditions in India

Supervised field trials were conducted at four different agro-climatic zones in India to evaluate the dissipation pattern and risk assessment of flubendiamide on tomato. Flubendiamide 480 SC was sprayed on tomato at 48 and 96 g active ingredient (a.i.) ha^?1. Samples of tomato fruits were drawn at 0, 1, 3, 5, 7, 10, 15, and 20 days after treatment. Quantification of residues was done on a high-performance liquid chromatography (HPLC) device with a photo diode array detector. The limit of quantification (LOQ) of this method was found to be 0.01 mg kg^?1 while limit of detection (LOD) being 0.003 mg kg^?1. Residues of flubendiamide were found below the determination limit of 0.01 mg kg^?1 in 20 days at both the dosages in all the locations. The half-life of flubendiamide at an application rate of 48 g a.i.?ha^?1 varied from 0.33 to 3.28 days and at 48-g a.i. ranged from 1.21 to 3.00 days. On the basis of data generated under the All India Network Project on Pesticide Residues, a preharvest interval (PHI) of 1 day has been recommended, and the flubendiamide 480 SC has been registered for its use on tomato by the Central Insecticide Board and Registration Committee, Ministry of Agriculture, Government of India. The maximum residue limit (MRL) of flubendiamide on tomato has been fixed by the Ministry of Health and Family Welfare, Government of India under Food Safety Standard Authority of India, as 0.07 μg g^?1 after its risk assessment.     

Study of chemical composition and morphology of airborne particles in Chandigarh, India using EDXRF and SEM techniques

The elemental composition and morphology of aerosols, collected from March 95 to February 96 and March 96 to August 96 respectively in the city of Chandigarh, India is determined using Energy Dispersive X-ray fluorescence and scanning electron microscopic techniques. The elemental concentration levels are found to be higher by a factor of 2-7 in the spring season as compared to the rainy season. The concentration of spherical and non-spherical (i.e. elongated) aerosols is more in the spring season and is reduced drastically in the rainy season due to the prominent wash out effect of rains. More accurate particle classification and source identification is obtained when based on combination of chemical composition and particle morphology. Possible sources identified from this analysis are soil dust, Industrial activity, Agricultural and Garbage burning, Maritime aerosols and Automobile exhaust.     

Development of an analytical method for analysis of flubendiamide, des-iodo flubendiamide and study of their residue persistence in tomato and soil

Flubendiamide is a new insecticide that has been found to give excellent control of lepidopterous pests of tomato. This study has been undertaken to develop an improved method for analysis of flubendiamide and its metabolite des-iodo flubendiamide and determine residue retention in tomato and soil. The analytical method developed involved extraction of flubendiamide and its metabolite des-iodo flubendiamide with acetonitrile, liquid-liquid partitioning into hexane-ethyl acetate mixture (6:4, v v?1) and cleanup with activated neutral alumina. Finally the residues were dissolved in gradient high pressure liquid chromatography (HPLC) grade acetonitrile for analysis by HPLC. The mobile phase, acetonitrile-water at 60:40 (v v?1) proportion and the wavelength of 235 nm gave maximum peak resolution. Using the above method and HPLC parameters described, nearly 100 % recovery of both insecticides were obtained. There was no matrix interference and the limit of quantification (LOQ) of the method was 0.01 mg kg?1. Initial residue deposits of flubendiamide on field-treated tomato from treatments @ 48 and 96 g active ingredient hectare?1 were 0.83 and 1.68 mg kg?1, respectively. The residues of flubendiamide dissipated at the half-life of 3.9 and 4.4 days from treatments @ 48 and 96 g a.i. ha?1, respectively and persisted for 15 days from both the treatments. Des-iodo flubendiamide was not detected in tomato fruits at any time during the study period. Residues of flubendiamide and des-iodo flubendiamide in soil from treatment @ 48 and 96 g a.i. ha?1 were below detectable level (BDL, < 0.01 mg kg?1) after 20 days. Flubendiamide completely dissipated from tomato within 20 days when the 480 SC formulation was applied at doses recommended for protection against lepidopterous pests.     

Thermoplastic Blends from Albumin and Zein: Plastic Formation and Mechanical Properties Including Modeling

The use of proteins in blending with traditional polymers in the formation of thermoplastics can produce plastics with properties that are superior to traditional petroleum-based plastics. We investigated the physical and thermal properties of albumin and zein thermoplastic blends plasticized with glycerol and mixed with varying amounts of low-density polyethylene (LDPE). Several mechanical models were utilized to determine how tensile properties will be altered when varying amounts of protein/LDPE were added into the thermoplastic blend. When analyzed for thermal properties, we found that as the amount of LDPE in the thermoplastic blend increased, the resulting plastic possessed thermal properties that were more similar to pure LDPE plastics. In terms of mechanical properties, comparison between the experimental data and model predictions points to a synergistic effect between albumin and LDPE that leads to higher modulus, while a potential lack of compatibility between zein and LDPE leads to a plastic with lower modulus. Based on our results, the use of albumin and zein proteins when blended with LDPE in the production of thermoplastics has potential use in the areas of medical and food packaging applications.