Pollution levels and characteristics of phthalate esters in indoor air of offices

The pollution status and characteristics of PAEs (phthalate esters) were investigated in indoor air of offices, and PAEs of both gas-phase and particulate-phase were detected in all the samples. The concentration (sum of the gas phase and the particulate phase) was 4748.24 ng/m³, ranging between 3070.09 and 6700.14 ng/m³. Diethyl phthalate, dibutyl phthalate, and di(2-ethylhexyl) phthalate were the most abundant compounds, together accounting for 70% of the Σ6PAEs. Dividing the particulate-phase PAEs into four size ranges (<2.5, 2.5-5, 5-10, >10 μm), the result indicated that PAEs in PM_2.5 were the most abundant, with the proportion of 72.64%. In addition, the PAE concentration in PM_2.5 correlated significantly with the total particulate-phase PAEs (R² = 0.85). Thus, the amount of PAEs in PM_2.5 can be estimated from the total amount of particulate-phase PAEs using this proportion. In a comparison between the offices and a newly decorated study room, it was found that pollution characteristics were similar between these two places. Thus, it is implied that the PAE concentration decreased by 50% 2 yr after decorating.     

Microcystis aeruginosa/Pseudomonas pseudoalcaligenes interaction effects on off-flavors in algae/bacteria co-culture system under different temperatures

We conducted an experiment to study the interaction effects of Microcystis aeruginosa and Pseudomonas pseudoalcaligenes on off-flavors in an algae/bacteria co-culture system at three temperatures (24, 28 and 32°C). Gas chromatography–mass spectrometry was applied to measure off-flavor compounds dimethyl sulfide (DMS), dimethyl trisulfide (DMTS), 2-methylisoborneol, geosmin (GEO) and β-cyclocitral. During the lag phase of co-cultured M. aeruginosa (first 15 days), P. pseudoalcaligenes significantly increased the production of DMS, DMTS and β-cyclocitral at all three temperatures. In the exponential phase of co-cultured M. aeruginosa (after 15 days), M. aeruginosa became the main factor on off-flavors in the co-culture system, and β-cyclocitral turned to the highest off-flavor compound. These results also indicated that DMS, DMTS and β-cyclocitral were the main off-flavor compounds in our M. aeruginosa/P. pseudoalcaligenes co-culture system. Univariate analysis was applied to investigate the effects of M. aeruginosa and P. pseudoalcaligenes on the production of off-flavors. The results demonstrated that both M. aeruginosa and P. pseudoalcaligenes could increase the production of DMS and DMTS, while β-cyclocitral was mainly determined by M. aeruginosa. Our results also provide some insights into understanding the relationship between cyanobacteria and heterotrophic bacteria.     

Microcystis aeruginosa/Pseudomonas pseudoalcaligenes interaction effects on off-flavors in algae/bacteria co-culture system under different temperatures

We conducted an experiment to study the interaction effects of Microcystis aeruginosa and Pseudomonas pseudoalcaligenes on off-flavors in an algae/bacteria co-culture system at three temperatures(24, 28 and 32℃). Gas chromatography–mass spectrometry was applied to measure off-flavor compounds dimethyl sulfide(DMS), dimethyl trisulfide(DMTS),2-methylisoborneol, geosmin(GEO) and β-cyclocitral. During the lag phase of co-cultured M. aeruginosa(first 15 days), P. pseudoalcaligenes significantly increased the production of DMS, DMTS and β-cyclocitral at all three temperatures. In the exponential phase of co-cultured M. aeruginosa(after 15 days), M. aeruginosa became the main factor on off-flavors in the co-culture system, and β-cyclocitral turned to the highest off-flavor compound. These results also indicated that DMS, DMTS and β-cyclocitral were the main off-flavor compounds in our M. aeruginosa/P. pseudoalcaligenes co-culture system. Univariate analysis was applied to investigate the effects of M. aeruginosa and P. pseudoalcaligenes on the production of off-flavors. The results demonstrated that both M. aeruginosa and P. pseudoalcaligenes could increase the production of DMS and DMTS, while β-cyclocitral was mainly determined by M. aeruginosa. Our results also provide some insights into understanding the relationship between cyanobacteria and heterotrophic bacteria.     

Environmental behaviors of phoxim with two formulations in bamboo forest under soil surface mulching

Phoxim (emulsifiable concentrate (EC) and granules (G)) has been widely used in bamboo forests. The persistence and magnitude of phoxim residues in the crop and soil must be investigated to ensure human and environmental safety. The environmental behaviors of the two formulations were investigated in a bamboo forest under soil surface mulching conditions (CP) and non-covered cultivation conditions (NCP). The half-lives of phoxim in soil under the two conditions in soil were 4.1–6.2 days (EC) and 31.5–49.5 days (G), respectively. Phoxim in EC could be leached from the topsoil into the subsoil. A minimized leaching effect was observed for G under NCP. Inversely, an enhanced leaching effect was observed for G under CP. The G formulation resulted in more parent compound (in bamboo shoots) and metabolite (in soil) residues of phoxim than in the case of EC, especially under CP conditions. In addition, the intensity and duration of the formulation effect on soil pH adjustment from G were more obvious than that from EC. Results showed that the environmental behaviors (distribution, degradation, residue) of phoxim in the bamboo forest were significantly influenced by the type of formulation. The prolongation effect from phoxim G might cause persistence and long-term environmental risk. However, bamboo shoot consumption could be considered relatively safe after applying the recommended dose of the two phoxim formulations.     

The relationship between light intensity and nutrient uptake kinetics in six freshwater diatoms

In order to find effective measures to control diatom blooms, a better understanding of the physiological characteristics of nutrient uptake in diatoms is needed. A study of P and Si-uptake kinetics for diatom species from two light regimes was conducted at low (LL), moderate (ML) and high light intensities (HL) (2, 25 and 80 μmol photons/(m²·sec)), respectively. The results showed that P uptake of diatoms was heavily influenced by historic light regimes. P affinity changed with growth and photosynthetic activity. The lowest half saturation constant for P uptake (K_m(P)) was under HL for high-light adapted diatoms while the lowest half-saturation constant for low-light adapted diatoms was observed under LL. The Si half-saturation constant (K_m(Si)) increased with increasing light intensities for pennate diatoms but decreased for centric diatoms. Diatom volumes were correlated with the maximum Si uptake rates (V_m(Si)) at HL and K_m(Si) at ML and HL for six diatom species. Our results imply that when we assess the development of diatom blooms we should consider light intensity and cell volume in addition to ambient Si or P concentration. The relationship between light intensity and P-uptake suggests that we can find suitable methods to control diatom blooms on the basis of reducing phytoplankton activity of P-uptake and photosynthesis simultaneously.     

Pollution levels and characteristics of phthalate esters in indoor air of offices

The pollution status and characteristics of PAEs(phthalate esters) were investigated in indoor air of offices, and PAEs of both gas-phase and particulate-phase were detected in all the samples. The concentration(sum of the gas phase and the particulate phase) was4748.24 ng/m3, ranging between 3070.09 and 6700.14 ng/m3. Diethyl phthalate, dibutyl phthalate, and di(2-ethylhexyl) phthalate were the most abundant compounds, together accounting for 70% of the ∑ 6PAEs. Dividing the particulate-phase PAEs into four size ranges( 2.5, 2.5–5, 5–10, 10 μm), the result indicated that PAEs in PM2.5were the most abundant,with the proportion of 72.64%. In addition, the PAE concentration in PM2.5correlated significantly with the total particulate-phase PAEs(R2= 0.85). Thus, the amount of PAEs in PM2.5can be estimated from the total amount of particulate-phase PAEs using this proportion. In a comparison between the offices and a newly decorated study room, it was found that pollution characteristics were similar between these two places. Thus, it is implied that the PAE concentration decreased by 50% 2 yr after decorating.     

Pollution levels and characteristics of phthalate esters in indoor air in hospitals

The concentrations of phthalate esters(PAEs) in Chinese hospitals were investigated by simultaneously determining concentrations of gas- and particle-phase PAEs. PAEs were detected in two third-class first-grade hospitals, two second-class first-grade hospitals, and a community health service center. Hospital drugstores had the highest concentration(24.19 μg/m3), which was 1.54 times that of newly decorated houses. The second highest concentration was found in the transfusion rooms, averaging 21.89 μg/m3; this was followed by the concentrations of PAEs in the nurse's workstations, the wards, and the doctor's offices, with mean concentrations of 20.66, 20.0, and 16.92 μg/m3, respectively. The lowest concentrations were found in the hallways(16.30 μg/m3). Of the six different kinds of PAEs found, major pollutants included diethyl phthalates, dibutyl phthalates, butylbenzyl phthalates and di(2-ethylhexyl) phthalates, comprising more than 80% of all PAEs present.Meanwhile, a comparison between different wards showed that PAE concentrations in the maternity wards were 1.63 times higher than in the main wards. Based on known health hazards, our results suggest that the PAEs seriously influence the health of the pregnant women and babies; therefore, it is of great importance to take the phthalate concentrations in hospitals into consideration. In addition, hospital indoor air was more seriously contaminated than the air of newly decorated houses.     

2014年-2020年江苏省城镇化的边际资源环境影响预测分析研究

利用历史数据,选取合适计算模型,定量预测了2014年-2020年江苏省城镇化边际资源环境影响,即以与城镇化发展密切相关的资源使用量或者城镇生活污染物排放量较上一年的增量,除以当年城镇化率增量,得到江苏省城镇化水平每提高一个百分点带来的资源环境影响,以期为江苏环境管理及政府综合决策提供切实有效的数据依据.结果表明:未来7年,江苏省城镇化率每上升1个百分点,增加城镇生活用水量约0.5亿立方米、城镇建设用地面积16万亩;增加城镇生活污水排放量1.15亿吨、生活氮氧化物排放量10 228吨、生活垃圾产生量36.4万吨;减少生活COD排放量7 549吨、生活氨氮排放量762吨、生活二氧化硫(SO2)排放量371吨.     

Microwave-assisted continuous flow phytosynthesis of silver nanoparticle/reduced graphene oxide composites and related visible light catalytic performance

The creation of an environmentally friendly synthesis method for silver nanomaterials (AgNPs) is an urgent concern for sustainable nanotechnology development. In the present study, a novel straightforward and green method for the preparation of silver nanoparticle/reduced graphene oxide (AgNP/rGO) composites was successfully developed through the combination of phytosynthesis, continuous flow synthesis and microwave-assistance. Oriental persimmon (Diospyros kaki Thunb.) extracts were used as both plant reducing and capping agents for fast online synthesis of AgNP/rGO composites. The experimental parameters were optimized and the morphologies of the prepared materials were investigated. The characterization results reveal that spherical AgNPs were quickly synthesized and uniformly dispersed on rGO sheets using the proposed online system. Fourier transform infrared spectroscopy analysis confirmed that phenols, flavonoids, and other substances in the plant extracts played a decisive role in the synthesis of AgNP/rGO composites. Using sodium borohydride (NaBH₄) degradation of p-nitrophenol (4-NP) as a model, the catalytic activity of the prepared AgNP/rGO materials was evaluated. The complete degradation of 4-NP was achieved within 12 min through the use of AgNP/rGO materials, and the composite had a much better catalytic activity than the bare AgNPs and rGO had. Compared with the conventional chemical method, our online method is facile, fast, cost-efficient, and environmentally friendly.     

基于分步热解技术的沉积岩形态汞同位素分析方法

沉积岩中的汞及其同位素常被用于指示大规模火山活动、海洋氧化还原演变等古环境演化事件,但现有研究主要聚焦总汞含量及相应的总汞同位素组成,缺少形态汞含量及其同位素组成数据,因此无法精准判别古环境中汞的来源、沉积环境和沉积过程。本研究开发了基于热解技术的沉积岩中不同形态汞的分离和同位素分析方法。首先通过沉积岩中典型形态汞（有机质、硫化物和粘土矿物结合态汞）单一标准建立热解温度曲线,然后将上述单一标准物质混合,通过调整升温速率以及形态汞采集的温度范围和时间优化热解分离方法,收集不同温度下析出的气态单质汞进行同位素分析。结果表明,分离的有机质结合态及硫化物结合态汞的δ²⁰²Hg和Δ¹⁹⁹Hg值同参考值的平均差值分别小于0.20‰和0.03‰,因此该分离方法能有效分离上述形态汞并进行汞同位素组成分析。上述方法被进一步应用于分析天然标准物质（黄红壤、水系沉积物、海相沉积岩）的汞形态及其同位素组成,验证了该方法在自然样品中的广泛适用性。