微波催化氧化处理正丁酸废水Ni-Co-Ce-O催化剂的制备及表征

采用微波催化氧化处理正丁酸模拟废水,以COD去除率为评价指标,对固相-焙烧法制备的3个系列共45种催化剂进行筛选,通过正交实验对催化剂制备工艺进行优化,并对优选出的催化剂进行XRD和SEM表征。结果表明,NiO+Co₂O₃+CeO₂（Ni∶Co=1∶1、NiO+Co₂O₃/CeO₂=1∶4）为筛选出的最优催化剂;Ni-Co-Ce-O催化剂最优制备条件为Ni：Co摩尔比1∶2、（NiO+Co₂O₃）/CeO₂质量比5%、研磨时间40 min、焙烧温度450℃、焙烧时间3 h,此条件下制备的催化剂催化效能最高,COD去除率达67%。     

混凝沉淀-厌氧水解-A/O-混凝沉淀工艺处理印染废水

以苏南某化工园区集中污水处理厂为例,介绍了混凝沉淀-厌氧水解-A/O-混凝沉淀组合工艺处理印染综合废水.实际运行结果表明,系统的直接运行成本为0.755元/t废水,对COD、氨氮、总氮、总磷、SS和色度的平均去除率分别为77.7%、90.5%、49.6%、61.7%、68.9%和88.7%,其中色度基本达标,氨氮的达标...     

汽车尾气微粒过滤器喷油助燃再生控制策略研究

微粒过滤器(DPF)已成为当前柴油机汽车尾气微粒排放控制技术的研究热点,以其喷油助燃再生方式为例,对再生控制问题进行有益探索。基于排气背压法判断DPF再生时机,阐述其再生控制原理。设计装有DPF及其喷油助燃再生装置的发动机实验台架,实时采集油耗与DPF背压数据,利用MATLAB建立DPF再生排气背压MAP。随机选取发动...     

催化型微粒捕集器的再生与压降数值研究

采用新的再生机理对催化型微粒捕集器（CPF）深床捕集微粒的氧化再生过程进行了建模,并将微粒捕集器中的压降分成5个部分分别计算,对其压降特性进行了数值研究。结果表明,新模型对深床捕集微粒的氧化再生计算与实验值吻合良好,比原模型更能反映微粒沉积的实际过程,深床捕集微粒的压降计算值也更精确。在排气流量大、温度高的工况下,深床捕集微粒的压降先迅速增大再减小的现象明显。研究结果能为工程应用提供验证手段,为CPF的优化设计提供依据。     

Study of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV)/Bamboo Pulp Fiber Composites: Effects of Nucleation Agent and Compatibilizer

In this study, poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV)/bamboo pulp fiber (BPF) composites were prepared by melt compounding and injection molding. The crystallization ability, tensile strength and modulus, flexural strength and modulus, and impact strength were found substantially increased by the addition of BPF. Tensile and flexural elongations were also moderately increased at low fiber contents (<20%). BPF demonstrated not only higher strength and modulus, but also higher failure strain than the PHBV8 matrix. Boron nitride (BN) was also investigated as a nucleation agent for PHBV8 and maleic anhydride grafted PHBV8 (MA-PHBV8) as a compatibilizer for the composite system. BN was found to increase the overall properties of the neat polymer and the composites due to refined crystalline structures. MA-PHBV8 improved polymer/fiber interactions and therefore resulted in increased strength and modulus. However, the toughness of the composites was substantially reduced due to the hindrance to fiber pullout, a major energy dissipation source during the composite deformation.     

花生壳中黄酮物质的提取及对油脂的抗氧化作用

对花生壳中黄酮物质的提取工艺进行了优化研究,并对提取物的抗氧化性进行了初步研究。用单因素试验分别对提取溶剂乙醇体积分数、料液比、提取时间及提取温度进行了研究。在此基础上,通过正交试验确定上述4个因素的最佳组合。优化后花生壳中黄酮的最大提取率为92．32％,花生壳中黄酮类化合物的适宜提取条件为乙醇体积分数60％、料液比1：30、提取时间150min、提取温度60℃。花生壳中黄酮类化合物对猪油有明显的抗氧化作用,当添加量为0．2％时抗氧化效果与0．2％BHT接近。     

The effects of economic growth and innovation on CO2 emissions in different regions

Economic growth and economic energy consumption have received greater attention due to its contribution to global CO₂ emissions in recent decades. The literature on CO₂ emissions and innovation for regional differences is very scanty as there is not enough study that considered different regions in a single analysis. We adopt a holistic approach by incorporating different regions so as to assess how innovation contributes to emission reduction. The study, therefore, examined the effects of innovation and economic growth on CO₂ emissions for 18 developed and developing countries over the period of 1990 to 2016. The study used panel technique capable of dealing with cross-section dependence effects: panel cross-sectional augmented Dickey-Fuller (CADF) unit root to determine the order of integration, Westerlund cointegration tests confirmed that the variables are co-integrated. We employed panel fully modified ordinary least square (FMOLS) and panel dynamic ordinary least square (DOLS) to estimate the long-run relationship. The results show that energy consumption increases CO₂ emissions at all panel levels. However, innovation reduces CO₂ emissions in G6 while it increases emissions in the MENA and the BRICS countries. Environmental Kuznets curve (EKC) hypothesis is valid for the BRICS. The pollution haven hypothesis (PHH) and pollution halo effect were confirmed at different panel levels. Based on the findings different policy recommendations are proposed.

     

Synergistic effects of chromium and copper on photosynthetic inhibition,subcellular distribution,and related gene expression in Brassica napus cultivars

Environmental Science and Pollution Research - Nowadays, modern plant physiology focuses on complex behavior of metal co-contaminants in agrosystems. Keeping this in view, the current study was...     

高温氧化-定向转化法处理草甘膦生产含磷废料

根据草甘膦生产含磷废料的成分特点,先进行预处理及指标调节,然后采用高温氧化-定向转化法进行氧化、聚合反应,得到高品质的磷酸盐产品。实验结果表明:控制预处理后含磷废料中杂质氯化钠质量分数不超3%、p H在7~9,雾化后进入高温氧化-定向转化反应器,在750~800℃下反应50~60 min,产物中焦磷酸钠质量分数达97%以上,含磷废料的COD去除率达99%以上,杂质氯化钠分解率不超0.8%。该方法工艺条件稳定,工程化简单,可以直接得到附加值较高的焦磷酸钠、三聚磷酸钠、六偏磷酸钠等磷酸盐产品,回收产品的经济性较好,推广应用前景广阔。     

Preparation and characterization of high surface area activated carbon from pine wood sawdust by fast activation with H<Subscript>3</Subscript>PO<Subscript>4</Subscript> in a spouted bed

Activated carbons were produced from waste pine wood sawdust using fast activation with H₃PO₄ in a spouted bed. In this study, activation temperature was set as 800 °C, and activation time ranged from 1 to 15 min. Experimental results show that sawdust impregnated with higher mass ratio of H₃PO₄ would be agglomerated in spouted bed, and difficult to fluidize. Therefore, an amount of quartz sand was added to assist for good fluidization. Fluidization of particle can improve the BET surface area or micropore volume of activated carbons. High BET surface area activated carbons can be obtained with activation time of only 1–5 min by combining the fluidization and H₃PO₄ fast activation. The obtained activated carbons contained developed pore structure and abundant surface functional groups (carboxyl, carbonyl and P-containing groups) by SEM–EDS, FTIR and XPS techniques. The particles of impregnation ratio of 1:1 can achieve fluidization without adding the quartz sand, which was convenient for experimental operation and even industrial production, and the BET surface area can reach more than 1000 m²/g in activation time of only 5 min.