污泥膨胀状态下原生动物群落结构分析

系统研究了丝状菌膨胀与非丝状菌膨胀2种典型污泥状态下原生动物的群落结构特征及其演变规律。伴随丝状菌的大量增殖,原生动物总量相应减少,匍匐型纤毛虫及有壳类肉足虫数量迅速上升,占据明显的优势地位,典型原生动物为斜管虫（Chilodonella sp.）、小轮毛虫（Trochilia minuta）以及匣壳虫（Centropyxis sp.）;非丝状菌污泥膨胀对原生动物总量及种群结构影响较小,伴随粘性菌胶团的大量出现,各功能类群的比例变化较小,但原生动物总量持续增加,其中菌食性纤毛虫呈线性增加,典型原生动物为钟虫（Vorticella sp.）。     

膜生物反应器中新型无纺布膜过滤特性及膜污染特征

通过无纺布和聚偏氟乙烯平板膜组件在相同操作条件下的对比实验,研究无纺布膜的过滤特性。结果表明,2种膜的膜生物反应器COD、氨氮平均去除率均＞90%。过膜压力变化表明在长期运行条件下,无纺布可适于作为膜生物反应器的过滤介质,其过滤机理为膜表面滤饼层形成动态膜,从而增强了膜截留能力。膜污染研究表明,无纺布膜阻力主要来自滤饼层（占总阻力的83.6%）,经清洗后膜通量可恢复至94%。扫描电镜显示膜表面滤饼层较厚,结合膜阻力分析结果认为,该滤饼层对膜污染和可逆性影响较大。对膜表面和膜孔中胞外聚合物（EPS）的红外分析证实,其中含有蛋白质和多糖物质,而且组分分析表明蛋白质是膜污染物EPS中的主要组分,在膜孔中的含量比滤饼层中还高。     

红萍净化水产养殖水体的研究

利用红萍(Azolla)对富营养化水产养殖水体进行净化研究。结果表明,红萍能显著增加水体中的DO,增氧幅度随流量在16.88%～70.46%之间变化,随着养殖水体流经的层数增多或者处理的时间延长,红萍对水体的增氧量加大,水中DO最终趋向一个常数值K;同时,红萍对水体中的NH₃-N和TP都有明显的去除效果,NH₃-N去除率随流量在9.86%～38.90%间波动,TP的去除率则随流量的变化在5.80%～38.43%之间波动。可见,红萍是净化水质的良好材料,能有效改善水产养殖水环境。利用红萍净化水体将为解决高密度集约化水产养殖的瓶颈提供新途径,实现水产养殖用水的封闭循环利用。     

南麂列岛海域浮游植物的群落结构研究

于2006年4月～2007年3月采集浙江省南麂列岛海域水样,研究了浮游植物的种类组成、分布特征、季节动态以及赤潮生物的现状.共鉴定浮游植物93种,其中硅藻35属68种,甲藻11属21种,蓝藻1属2种以及金藻1属2种.浮游植物的优势种类在不同季节各有不同.南麂海域浮游植物细胞丰度较高,年平均细胞丰度达到319.03 cells/mL,高峰区集中分布在春季和夏季.对浮游植物群落的多项生态学指标进行了分析.     

胜利原油对褐牙鲆(Paralichthys olivaceus)幼鱼鳃Na~+-K~+-ATPase活性的影响

以胜利原油为污染物对褐牙鲆幼鱼鳃丝Na~+-K~+-ATPase活力的影响进行了研究.实验结果表明,低浓度的胜利原油对实验褐牙鲆幼鱼鳃丝的Na~+-K~+-ATPase活力的活性有诱导作用,随着浓度的升高对其活性影响越大,并随着曝油时间的延长先升高然后降低到一个相对稳定的数值.当实验油浓度为1.25 mg/L时,与对照组有极显著性差异(P<0.01).比较不同实验组在相同暴露时间鳃丝Na~+-K~+-ATPase活力,可以说明实验鱼参与能量代谢、物质运输等重要生化过程的能力是一定的.与对照组相比较,实验第3 d的数值极显著差异(P<0.01).本研究为保护海洋生态环境和渔业资源提供基础资料.     

海水中痕量元素测定及其在重金属污染源判别方面的应用

利用电感耦合等离子体质谱(ICP-MS)研究了胶州湾及莱州湾这两个海域中痕量元素污染水平,发展了ICP-MS海水环境中痕量元素的测定方法,同时找出海水环境中具有保守性的数种元素作为污染示踪元素.达到对于海水环境中痕量污染物被动示踪的目的.对18个真实样品进行了识别率试验,识别率可达90%以上,在选取3个海水样品及1个河水样品混合后的模拟分担率实验,也取得了满意的结果,其误差平均值仅有1.17%.     

Recovery of Cu and Fe from Printed Circuit Board waste sludge by ultrasound: Evaluation of industrial application

The paper presents a novel cleaner process for metal recovery from the Printed Circuit Board (PCB) waste sludge by assistance of ultrasound. The process can effectively recover heavy metals at low cost with high separation and recovery efficiency, produce high quality products and also achieve zero waste discharge with operation at industrial scale. With the PCB waste sludge containing (wet content) 3.14–4.85% copper and 3.71–4.23% iron, copper recovery efficiency of 95.2–97.5% and iron recovery efficiency of 97.1–98.5% were achieved, while the purity of copper sulfate produced by the process was 98.0% and the produced ferric chloride had a satisfied quality for using as a coagulant material for the plant on-site wastewater treatment. The process had been successfully scaled up to the industrial scaled applications in a heavy metal recovery plant in city of Huizhou, China for more than two years. The novel cleaner heavy metal recovery process has a great prospect on the applications of resources recovery and environmental protection practices.     

恒液位推流式改良SBR工艺处理生活污水

通过对恒液位推流式改良SBR工艺处理生活污水工程应用的研究,结果表明:恒液位推流式改良SBR工艺在降低工程成本和减少设备量的同时能较好的去除污水中的污染物,具有良好的脱氮除磷效果,COD去除率可达85%~93%;TP的去除率可达84%;TN的去除率可达82%。     

Mechanism of calcium mitigating membrane fouling in submerged membranebioreactors

Two parallel membrane bioreactors (MBRs) were operated under different calcium dosages (168.5, 27 mg/L) to gain a better understanding of the mechanism of retarding membrane fouling by adding calcium. The results showed that the particle size of sludge flocs increased and the particle size distribution tended to be narrow at the optimum dosage (168.5 mg/L). Calcium was effective in decreasing loosely bound extracellular polymeric substances (LB-EPS) in microbial flocs and soluble microbial products (SMP) in the supernatant at the dosage of 168.5 mg/L by strengthening the neutralization and bridging of EPS with flocs. Furthermore, the amount of COD_S and COD_C decreased in both the mixed liquor and the fouling cake layer on the membrane surface. In order to compare the filtration characteristics of cake layers from the MBRs with the two calcium dosages, the specific cake resistance and the compressibility coefficient were measured. The specific cake resistance from the MBR with optimum dosage (168.5 mg/L) was distinctly lower than that with low dosage (27 mg/L). The compressibility coefficient of the cake layers under two dosages were respectively attained as 0.65, 0.91. Scanning electron microscopy (SEM) and three-dimensional confocal scanning laser microscope analysis (CLSM) images were utilized to observe the gel layer directly.     

节能型焦化污水生物脱氮新工艺的生产性试验研究

采用节能型生物脱氮新工艺对黑龙江某焦化厂的污水处理站进行生产性试验研究,结果表明:处理后出水达到GB8978-1996《污水综合排放标准》一级,并可回用于熄焦。该工艺适合推广应用于焦化污水、垃圾渗滤液、养殖、化肥等高含氮有机污水的处理。