A Biosurfactant-Enhanced Soil Flushing for the Removal of Phenanthrene and Diesel in Sand

In order to examine the potential of biosurfactants in soil remediation, and to investigate the effects of several operating conditions, such as flow rate, biosurfactant concentration and surfactant type, biosurfactant-enhanced soil flushing was conducted. In the biosurfactant-enhanced soil flushing process, the removal efficiency increased as the flow rate decreased. Rhamnolipid showed no effect on the removal efficiency of phenanthrene and diesel from sand in the concentration range 0.3-0.5%. However, rhamnolipid showed higher efficiencies for the removal of phenanthrene and diesel from sand than Tween 80. Based on total recovery, following an equivalent pore volume flush, it was more difficult to remove diesel than phenanthrene. In order to obtain the specific removal efficiency, more pore volumes of surfactant solution may be required in field applications. Under optimum conditions, the biosurfactant removed as much as 70% of the phenanthrene and 60% of the diesel in the sand. These results indicate that the use of biosurfactants in the flushing process is favorable, not only with respect to the environment, but also on removal efficiencies.     

Removal characteristics of trace compounds of landfill gas by activated carbon adsorption

The removal characteristics of trace compounds and moisture in raw landfill gas (LFG) were studied. The LFG from the extraction well was saturated with water and moisture was eliminated by physical methods including cyclone-type dehydrator and compressor. The moisture removal efficiency of dehydrator and compressor was above 80%. As the moisture contents of LFG decreased, the toxic compounds like aromatics and chlorinated compounds were effectively removed by using the granular activated carbon. The breakthrough time and adsorption capacity of benzene, toluene, and ethyl benzene decreased rapidly when the relative humidity is over 60%. The effect of moisture was more pronounced at lower adsorbate concentrations tested than at higher concentrations. The breakthrough curves for multi-component mixtures show displacement effects. In the course of competing adsorption, adsorbates with strong interaction force to displace weakly bounded substances. Adsorption by activated carbon is in descending order of xylene, ethylbenzene, toluene, tri or tetrachloroethylene, benzene, carbon tetrachloride and chloroform in LFG, respectively.     

PCDD and PCDF exposures in workers and controls living near an industrial waste incinerator

This study measured the levels of 17 congeners of PCDDs/PCDFs in serum to compare the levels between potentially exposed workers at an industrial waste incinerator and any residents with no known exposures. The 1,2,3,6,7,8- and 1,2,3,7,8,9-HxCDD were detected in serum of workers but in controls. Likewise, 1,2,3,7,8-PeCDF, 1,2,3,6,7,8- and 1,2,3,7,8,9-HxCDF were detected only in serum of workers. The international toxic equivalent (TEQ) levels of PCDDs/PCDFs in sera of workers are much higher than in controls. Among PCDDs, the proportion of total concentration and TEQ level is dominated predominantly by 1,2,3,6,7,8- and 1,2,3,7,8,9-HxCDD. We need extensive studies to estimate human exposure and are continuing this investigation.     

Organochlorine and butyltin residues in walleye pollock (Theragra chalcogramma) from Bering Sea, Gulf of Alaska and Japan Sea

Persistent organochlorine (OC) and toxic butyltin compounds (BTs) were determined in walleye pollock (Theragra chalcogramma) collected from Gulf of Alaska, Bering Sea and Japan Sea, during 1991 and 1992. Polychlorinated biphenyls (PCBs) and dichlorodiphenyltrichloroethane (DDTs) and its metabolites were the most abundant compounds ranging up to 3200 and 2500 ng/g on lipid weight, respectively, followed by chlordane compounds (CHLs), hexachlorocyclohexane isomers (HCHs) and hexachlorobenzene (HCB) in the liver of walleye pollock. Concentrations of HCHs and HCB in walleye pollock from these remote areas were higher than those in fishes from the western North Pacific and Japanese coastal waters, indicating atmospheric transport of these compounds to higher latitude regions such as Bering Sea and Gulf of Alaska and/or local input around northern Japan Sea. The concentrations of other OCs were generally comparable to those in fishes from North Pacific Ocean and Japanese waters but significantly lower than in cod-like fishes from North Atlantic and European countries. Among sampling locations, walleye pollock from Japan Sea showed higher concentrations of DDTs and HCHs compared to fishes from Bering Sea and Gulf of Alaska, suggesting greater input of these compounds around Japan Sea. Slower declining trend of DDTs and CHLs and an increasing pattern of PCBs concentrations were found in walleye pollock from Bering Sea during 1982-1992. This may imply a continuous input of these compounds by long-range transport and/or long-term persistency in these cold regions. Compared to the fishes from Japan Sea, walleye pollock from Bering Sea and Gulf of Alaska showed higher proportions of alpha-HCH and p,p'-DDE in the composition of HCH isomers and DDT compounds, respectively. This suggests selective transportability of these compounds during long-range transport to higher latitude remote areas. Concentrations of tributyltin (TBT) in the muscle of walleye pollock ranged from 1.1 to 5.5 ng/g on wet weight. Concentrations of TBT in deep-sea walleye pollock from Gulf of Alaska and Bering Sea were lower than those in Japan Sea.     

PCDDs, PCDFs, and PCBs concentrations in breast milk from two areas in Korea: body burden of mothers and implications for feeding infants

We determined breast milk concentration of polychlorinated dibenzo-p-dioxins (PCDDs)/polychlorinated dibenzofurans (PCDFs) and polychlorinated biphenyls (PCBs) in 24 mothers living in Korea, and assessed the maternal body burden based on PCDDs/PCDFs and PCBs concentrations in breast milk and an infant intake rate through breast-feeding based on their concentration in breast milk. PCDDs/PCDFs and PCBs levels in breast milk from primipara mothers were found to be higher than those from multipara mothers. For total PCDDs/PCDFs TEQ level, 2,3,4,7,8-PeCDD was the predominant congener, and the proportion of 2,3,7,8-TCDD was less than 3% of total PCDDs/PCDFs TEQ level. For PCBs TEQ level, PCB-126 was the predominant congener. Maternal body burden levels of PCDDs/PCDFs and PCBs based on their concentrations in breast milk were 268-622 TEQ ng. The daily dioxin intakes of mothers were predicted to be 0.78-2.18 TEQ pg/kg/day for PCDDs/PCDFs and 0.34-0.66 TEQ pg/kg/ day for PCBs. For the first year, the body burden of an infant was predicted to be 212 TEQ ng and the daily intake of an infant was predicted to be 85 TEQ pg/kg/day, assuming the mean dioxin-related compounds concentration (27.54 TEQ pg/g fat).     

Risk of serious injury of occupants involved in frontal crashes of cab-over-type trucks

Objectives: Truck vehicles (TVs) have a different structure and stiffness than non-TVs and are used commercially for transporting goods. This study aimed to analyze whether truck occupants have a greater risk of serious injury than those of other types of vehicles.

Methods: Crash data were obtained from the Korean In-Depth Data Analysis Study (KIDAS) for calendar years 2011–2016. Vehicles involved in frontal crash were included and classified into TVs and non-TVs (passenger cars and sports utility vehicles). We compared the demographic characteristics and serious injuries by body region between the 2 groups and analyzed factors that contributed to the serious injury severity from frontal crashes.

Results: The analysis was based on 884 occupants; 177 (20.0%) were in TVs and 707 (80.0%) were in non-TVs. Non-TVs had more frontal airbags deployments than TVs (50.9% vs. 3.4%, P <.01). TV occupants were 4.8 times more likely to have a serious lower extremity (LE) injury (adjusted odds ratio [AOR] = 4.820; 95% confidence interval [CI], 2.407–9.653) and 2.5 times to have a serious abdominal injury (AOR = 2.465; 95% CI, 1.108–5.487) compared to non-TV occupants.

Conclusions: Truck occupants had more serious LE and abdominal injuries than those of other types of vehicles in frontal crashes. Structural improvement and legislative efforts to develop safety systems are necessary to improve the safety of truck occupants.     

Evaluating the e ects of granular and membrane filtrations on chlorine demand in drinking water

In this study, chlorine decay experiments were conducted for the raw water from Nakdong River that is treated by Chilseo Water Treatment Plant (CWTP) situated in Haman, Korea as well as the e uents from sand and granular activated carbon (GAC) filters of CWTP and fitted using a chlorine decay model. The model estimated the fast and slow reacting nitrogenous as well as organic/inorganic compounds that were present in the water. It was found that the chlorine demand due to fast and slow reacting (FRA and SRA) organic/inorganic substances was not reduced significantly by sand as well as GAC filters. However, the treated e uents from those filters contained FRA and SRA that are less reactive and had small reaction rate constants. For the e uents from microfiltration, ultrafiltration, and nanofiltration the chlorine demand because FRA and SRA were further reduced but the reaction rate constants were larger compared to those of sand and GAC filter e uents. This has implications in the formation of disinfection by products (DBPs). If DBPs are assumed to form due to the interactions between chlorine and SRA, then it is possible that the DBP formation potential in the e uents from membrane filtrations could be higher than that in the e uents from granular media filters.     

木棉纤维对水中柴油的吸附性能

用木棉纤维作为吸附材料对含油废水进行吸附研究,考察了吸附平衡时间、等温吸附、以及溶液pH、溶液盐浓度等因素对油吸附的影响。溶液pH对吸附影响很小,在不同的盐浓度下吸附略有下降,木棉纤维吸附剂对0#柴油的吸附所需平衡时间为4h,在室温和pH=7左右的条件下,吸附材料对0#柴油的最大吸附量(qm)为(31±0.81)g/g,等温吸附线符合Langmuir和Freundlich模式,研究结果表明:木棉纤维对含油废水的吸附能在较短的时间达到吸附饱和,吸附量较大,对溶液环境的适应能力强,具有很好的应用前景。     

Design and use of group-specific primers and probes for real-time quantitative PCR

Real-time quantitative polymerase chain reaction (qPCR) has gained popularity as a technique to detect and quantify a specific group of target microorganisms from various environmental samples including soil, water, sediments, and sludge. Although qPCR is a very useful technique for nucleic acid quantification, accurately quantifying the target microbial group strongly depends on the quality of the primer and probe used. Many aspects of conducting qPCR assays have become increasingly routine and automated; however, one of the most important aspects, designing and selecting primer and probe sets, is often a somewhat arcane process. In many cases, failed or non-specific amplification can be attributed to improperly designed primer-probe sets. This paper is intended to provide guidelines and general principles for designing group-specific primers and probes for qPCR assays. We demonstrate the effectiveness of these guidelines by reviewing the use of qPCR to study anaerobic processes and biologic nutrient removal processes. qPCR assays using group-specific primers and probes designed with this method, have been used to successfully quantify 16S ribosomal Ribonucleic Acid (16S rRNA) gene copy numbers from target methanogenic and ammonia-oxidizing bacteria in various laboratory- and full-scale biologic processes. Researchers with a good command of primer and probe design can use qPCR as a valuable tool to study biodiversity and to develop more efficient control strategies for biologic processes.