Polybrominated diphenyl ethers in house dust in Singapore

The use of polybrominated diphenyl ethers (PBDEs) as flame retardants in Singapore is not strictly regulated; therefore these compounds can be readily found in furniture, electronic devices, and building materials. This study was the first of its kind to be conducted in Singapore to measure concentrations of PBDEs in house dust. Samples were collected from 31 homes in various locations across the island-state of Singapore, and a total eight PBDEs congeners were measured. PBDEs were detected in all 31 dust samples and the number of BDE congener detected per home ranged between 3 and 8. The most abundant BDE congeners found were BDE 47, 99 and 209, with a median value of 20 ng g(-1) dust, 24 ng g(-1) dust and 1000 ng g(-1) dust, respectively. BDE 209 contributed 88% to the median of all the congeners, and BDE 47 and 99 contributed 1.8% and 3.5%, respectively. Different congener profiles were observed between this and studies conducted elsewhere, which is consistent with the use of different commercial PBDE around the world. No significant correlations between PBDE dust levels and residential characteristics (number of TVs and computers, floor area or flooring material) were observed. The daily intake of PBDEs via the inhalation pathway was estimated. House dust may be regarded as the most important exposure route of PBDEs for children.     

Selected organochlorine pesticide and polychlorinated biphenyl residues in house dust in Singapore

Although the use of organochlorine pesticides (OCPs) and polychlorinated biphenyls (PCBs) has been prohibited in Singapore since 1980, OCPs and PCBs still can be detected in the environment and represent a potential threat to public health. In this study, OCPs and PCBs were measured in house dust samples collected from 31 homes across the island-state of Singapore. Organochlorine pesticides, such as hexachlorocyclohexanes (HCHs), chlordanes and dichlorodiphenyltrichloroethanes (DDTs) were tested, with a range of 相似文献   

Development of a test method against hot alkaline chemical splashes.

High temperature alkaline chemical liquids have caused injuries and hazardous situations in Finnish pulp manufacturing mills. There are no requirements and/or test method standards concerning protection against high temperature alkaline chemical splashes. This paper describes the test method development process to test and identify materials appropriate for hot liquid chemical hazard protection. In the first phase, the liquid was spilled through a stainless steel funnel and the protection performance was evaluated using a polyvinyl chloride (PVC) film under the test material. After several tentative improvements, a graphite crucible was used for heating and spilling the chemical, and a copper-coated K-type thermometer with 4 independent measuring areas was designed to measure the temperature under the material samples. The thermometer was designed to respond quickly so that peak temperatures could be measured. The main problem was to keep the spilled amount of chemical constant, which unfortunately resulted in significant variability in data.     

Numerical simulation of hydrogen–air detonation for damage assessment in realistic accident scenarios

An accidental hydrogen release within an equipment enclosure may result in the presence of detonable mixture in a confined environment. From a safety standpoint, it is then useful to assess the potential for damage. In that context, numerical simulation of the sequence of events subsequent to detonative ignition provides a useful tool, although with obvious limitations. This article describes the procedure, summarizes two case studies, and reviews the limitations. First, a hydrogen dispersion pattern is obtained from numerical simulation of dispersion, using a commercial package designed primarily for incompressible flow. This dispersion cloud is then used as the initial condition in an inviscid, compressible, reactive flow simulation. To force detonative ignition, a sufficiently large amount of energy is deposited in a small region that corresponds to the ignition location. Chemistry is modeled using a single step Arrhenius model. Because the wave thickness is small compared with the computational domain, a fine mesh is needed, limiting the practicality of the process to two-dimensional geometries. This is the most significant limitation; it is conservative. The two cases described in the paper include an electrolyzer, in which a small release occurs, leading potentially to some damage to the enclosure, and a reformer, in which the consequences are potentially more serious.     

炭催化剂吸附剂标准物质的研制

本文介绍了炭催化剂吸附剂标准物质的研制过程。对标准物质的制备技术、均匀性检验、稳定性考察及定值和不确定度进行了逐项分析。采用活性炭浸渍、煅烧技术制得炭催化剂吸附剂标准物质。试验结果表明,该标准物质定值结果准确,均匀性、稳定性良好。铜含量的标准值为11．06％,扩展不确定度为0．13％。     

湿度传感器在防护性能检测中动态湿度的测量方法

1引言 防护装备在核、生、化环境下起着防放射性灰尘、防生物细菌和防化学毒剂的作用。防护装备的防护性能检测准确与否。直接影响着防护装备产品的质量乃至使用者的生命安全。防护装备的防护性能受湿度的影响很大,以前,在防护装备的防护性能检测过程中是利用干、湿球温度计来检测测试管路中的湿度。     

一种湿度计的校准方法——测量不确定度分析校准法

本文提出了校准湿度计的一种新方法一测量不确定度分析校准法,以利用5121湿度发生器校准可输出（0-5）V的湿度传感器的基本误差为例,介绍了其校准方法确定了该方法校准湿度计的置信度和准确葭：