电旋风除尘模型实验研究

本研究试图将电除尘器与旋风除尘器组合为一体,以求取得较高的除尘效率,并利用旋转气流实现自动清灰。本文介绍了切向进气直流式电旋风除尘的模型试验,通过实测不同工况下的除尘效率和压力损失,应用经典除尘理论,建立了相应的数学模型。     

建立我国重大事故预防控制体系之探讨

简述了我国重大工业事故发生的主要原因，提出了建立重大事故预防控制体系的建议，制定《重大事故预防和控制法》，实行重大危险源上报、登记、评价、分级监察管理，建立国家、省、市三级重大事故应急反应系统和重大危险源动态监控网络系统。     

郫县灰潮田有效硅含量和小麦施硅效应初探

通过同田对比试验，本文对郫县水稻土小麦施用硅肥进行了初步研究．结果表明，小麦施硅获得了增产效果；施硅对小麦穗粒数、株高和基部节间体积等具有生长效应；郫县水稻土有效硅含量为１２７±３９ｍｇ·ｋｇ－１（ｎ＝１２），变异较大，与土壤粘粒（＜０．００１ｍｍ）呈极显著正相关（ｒ＝０．７９）；发育于第四系岷江灰色冲积母质的郫县水稻上，粘粘含量普遍较低，因此，郫县小麦施硅具有较大增产潜力．     

INVESTIGATION OF TURBIDITY MAXIMUM IN A MESOTIDAL ESTUARY,TAIWAN1

ABSTRACT: To comprehend the distributions of salinity, temperature, and suspended sediment in the Danshuei River estuary in Taiwan, monthly field surveys were conducted in 2003. These included several high and low slackwater surveys and intensive surveys. The results show that the Danshuei River estuary is predominately a partially mixed estuary. The highest concentration of suspended sediment is typically observed at the Chung‐Hsin Bridge, the most upstream sampling station. The suspended sediment concentration exhibits a general decreasing trend in the downstream direction. It may be concluded that the sediments mostly come from the upstream reach. A locally high concentration of suspended sediment is found at the Kuan‐Du station because of the local deep channel bathymetry and two‐layered estuarine circulation. A vertical two‐dimensional hydrodynamic and sediment transport model is applied to investigate the tidally averaged salinity distribution, residual circulation, and suspended sediment concentration. The modeling results reveal that, under the Q₇₅ flow condition (i.e., low flow), a turbidity maximum occurs at the Kuan‐Du station due to the strong estuarine circulation. The model simulation with a much higher river flow condition results in a weaker residual circulation and weaker turbidity maximum.     

利用造纸黑液制备水煤浆添加剂

利用造纸黑液中有效成分，经过适当处理制备水煤浆添加剂，并且对添加剂的性能进行了测试。结果表明，依照该工艺生产的添加剂，性能优良，能够满足工业生产需要。     

CAF涡凹气浮处理含油废水的中试试验研究

针对石化公司污水成分复杂,COD和油含量较高,还含有较多的硫化物、挥发酚和氨氮(NH3-N)等情况,选用一种新型的气浮设备CAF涡凹气浮系统对该含油废水进行了预处理中试试验。试验结果表明CAF处理石化含油废水效果明显,气浮处理效果好,出水油在10 mg/L以下,去除率高达95%,且CAF气浮的电耗小、占地面积小、操作管理和维修非常简便。采用CAF设备,占地面积可节省70%～80%,每年可节约电费50～60万元(按1000 m3/h,0.8元/kW·h),操作使用也极其简单,具有可观的经济效益。     

Analysis of the recycling system for aluminum cans,focusing on collection,transportation, and the intermediate processing methods

In this article, the systems for the collection and intermediate processing of used beverage cans (UBCs) are compared and analyzed, focusing on the time taken and the cost of processing, the energy consumption, and the emissions of CO₂, SO _x , and NO _x , during the process. We found that cases where the UBCs were crushed in the discharging process gave better results, and how the UBCs were collected was the most important factor. It was more desirable to treat UBCs in one place than in two places. When the transportation distance was longer, the pressed form of UBCs was more convenient. When the transportation distance was short, the original form, the crushed form, and the shredded form of UBCs were all suitable. That is, the contribution of the transportation process to the evaluation was large when the transport distance was long, and the contribution of the treatment process was large when the transport distance was short.     

Utilization of red mud as catalyst in conversion of waste oil and waste plastics to fuel

The aim of this study was to investigate the possibilities of using a by-product (red mud) from alumina production as a catalyst for recovery of waste. The conversion of waste mineral oil (WMO) and waste mineral oil/municipal waste plastic (WMO/MWP) blends over red mud (RM), a commercial hydrocracking catalyst (silica–alumina), and a commercial hydrotreating catalyst (Ni–Mo/alumina) to fuel has been studied. The effect of the catalyst and the temperature on the product distribution (gas, liquid, and wax) and the properties of liquid products were investigated. In the case of hydrotreatment of WMO, the liquids obtained over RM at both 400° and 425°C had larger amounts of low-boiling hydrocarbons than that of thermal or catalytic treatment with hydrotreating catalyst. Gas chromatography and nuclear magnetic resonance analysis of the liquid products showed that RM had hydrogenation and cracking activity in hydrotreatment of WMO. In coprocessing of WMO with municipal waste plastics, temperature had an important effect as well as the amount of MWP in the blend and the catalyst type. The hydrocracking at 400°C produced no liquid product. In hydrocracking at 425°C, the product distribution varied with catalyst type and MWP amount. The commercial hydrocracking catalyst had more cracking ability in the conversion of WMO/MWP to liquid and gas fuel than RM. In the case of hydrocracking over RM, the largest amount of liquid having satisfactory quality was obtained only from the blend containing 20% MWP.     

Ring-Opening Polymerization of Cyclic Esters onto Liquefied Biomass

Ring-opening polymerization of cyclic esters (-caprolactone, -valerolactone, and l-lactide) onto liquefied biomass (LB) was conducted to obtain the polyester-type polyol and to regulate the characteristics of LB. IR and ¹H-NMR spectra of the obtained polyol showed that the polymerization was successfully conducted in the presence of acid catalyst, which is used in liquefaction. The molecular weight (M_w), hydroxyl value, and viscosity were controllable by changing the reaction conditions. Polyester-type polyurethane foams with a wide range of properties were prepared from the obtained polyol with the appropriate combinations of foaming agents.