A model for measuring leaf growth rate of vegetative shoot in the seagrass, Zostera marina

A new model for determining leaf growth in vegetative shoots of the seagrass Zostera marina (eelgrass) is described. This model requires the weights of individual mature and immature whole leaves and leaf plastochrone interval (P_L) as parameters, differing from the conventional leaf marking technique (CLM) that requires cutting and separation between new and old tissue of leaves. The techniques required for the model are the same as for the plastochrone method, but the parameters differ between both methods in use of the weight of individual immature leaves. In a mesocosm study, eelgrass growth was examined, and parameters for the new model and plastochrone method (the weights of individual mature and immature leaves and P_L) were measured. Leaf growth rate was measured using the CLM and determined by the new method and the plastochrone method. The results were then compared between the CLM, the new model, and the plastochrone method. The results obtained with the new model were similar to those obtained with the CLM. However, the results of the plastochrone method differed from those of the CLM, while the weight of immature leaves varied seasonally. The new model was also used to determine leaf growth in a natural eelgrass bed in Mikawa Bay, Japan, and revealed the growth rates in all shoots and those of different ages. This method would be advantageous as an accurate means of direct measurement in fieldwork, and should therefore be a useful tool for monitoring seagrass growth.     

Creating an academic landscape of sustainability science: an analysis of the citation network

Sustainability is an important concept for society, economics, and the environment, with thousands of research papers published on the subject annually. As sustainability science becomes a distinctive research field, it is important to define sustainability clearly and grasp the entire structure, current status, and future directions of sustainability science. This paper provides an academic landscape of sustainability science by analyzing the citation network of papers published in academic journals. A topological clustering method is used to detect the sub-domains of sustainability science. Results show the existence of 15 main research clusters: Agriculture, Fisheries, Ecological Economics, Forestry (agroforestry), Forestry (tropical rain forest), Business, Tourism, Water, Forestry (biodiversity), Urban Planning, Rural Sociology, Energy, Health, Soil, and Wildlife. Agriculture, Fisheries, Ecological Economics, and Forestry (agroforestry) clusters are predominant among these. The Energy cluster is currently developing, as indicated by the age of papers in the cluster, although it has a relatively small number of papers. These results are compared with those obtained by natural language processing. Education, Biotechnology, Medical, Livestock, Climate Change, Welfare, and Livelihood clusters are uniquely extracted by natural language processing, because they are common topics across clusters in the citation network.     

New technique using galactose-specific lectin for isolation of fetal cells from maternal blood

To isolate fetal cells from maternal blood, we developed a new method based on galactose-bearing conjugation. Nucleated red blood cells (NRBCs), which highly express galactose on their surface, were selectively attached to a substrate coated with a galactose-containing polymer via soybean agglutinin (SBA), a galactose-specific lectin. Cord blood samples were used to evaluate enrichment efficacy of NRBCs by this method. Blood samples were obtained from 131 pregnant women between 6 and 27 gestational weeks. After preliminary condensation of fetal cells by Ficoll gradient centrifugation, NRBCs were enriched using galactose-positive selection by adjusting SBA concentration. We isolated one to severalhundred NRBCs (mean±SD, 7.8±8.5) in 2.3 ml of peripheral blood samples from 96% of pregnantwomen. The isolated NRBCs were analyzed by a Y-chromosome FISH probe in eight cases carrying male fetuses. Y-signals were detected in all eight cases and more than half of the NRBCs wereoffetal origin. The study demonstrates that our new method using galactose-specific lectin provides effective enrichment of fetal NRBCs allowing non-invasive prenatal diagnosis. Copyright © 2002 John Wiley & Sons, Ltd.     

Ocean fertilization for geoengineering: A review of effectiveness,environmental impacts and emerging governance

Dangerous climate change is best avoided by drastically and rapidly reducing greenhouse gas emissions. Nevertheless, geoengineering options are receiving attention on the basis that additional approaches may also be necessary. Here we review the state of knowledge on large-scale ocean fertilization by adding iron or other nutrients, either from external sources or via enhanced ocean mixing. On the basis of small-scale field experiments carried out to date and associated modelling, the maximum benefits of ocean fertilization as a negative emissions technique are likely to be modest in relation to anthropogenic climate forcing. Furthermore, it would be extremely challenging to quantify with acceptable accuracy the carbon removed from circulation on a long term basis, and to adequately monitor unintended impacts over large space and time-scales. These and other technical issues are particularly problematic for the region with greatest theoretical potential for the application of ocean fertilization, the Southern Ocean. Arrangements for the international governance of further field-based research on ocean fertilization are currently being developed, primarily under the London Convention/London Protocol.     

Mercury emission from sewage sludge incineration in Japan

Sewage sludge contains trace amounts of mercury, and sewage sludge incineration is a major source of mercury emissions. However, relatively few studies have reported on mercury emissions from sewage sludge incineration. Consequently, data on emissions from sewage sludge incinerators must be updated to estimate current emissions of mercury. In this study, we examined mercury emissions and speciation using continuous mercury analyzers in two incinerators. The mercury concentrations in stack gas from facilities A and B were 36.6 and 21.1???g/Nm³, respectively. As a result, the emission rate was calculated to be 0.282?C0.750?g/ton-dry sludge. Considering the total amount of sewage sludge incinerated in Japan, the mercury emissions from sewage sludge incinerators were estimated to be 0.49?C1.31?tons/year.     

Aryl hydrocarbon receptor activities of hydroxylated polycyclic aromatic hydrocarbons in recombinant yeast cells

Hydroxylated polycyclic aromatic hydrocarbons (OH-PAH) with less than four rings are frequently found in the environment, whereas the toxicities associated with these compounds remain unclear. In this study, aryl hydrocarbon receptor (AhR)–ligand binding activities of OH-PAH were investigated by using a recombinant yeast assay system. The majority of the OH-PAH tested showed AhR–ligand binding activities, especially, when the hydroxylated derivatives of naphthalene were incubated with recombinant yeast. The structure–activity relationship between AhR activity and molecular weight or the octanol–water partition coefficient value of OH-PAH displayed significant correlations. These findings indicate that the site and number of hydroxy-groups substituted on PAH skeleton apparently influenced the AhR – ligand binding activity in the recombinant yeast assay.     

PCDDs/DFs emissions from crematories in Japan

Concentrations of PCDDs and PCDFs in emission gases from 10 crematories were measured. The relationship between PCDDs/DFs and several factors such as structure, equipment and operational state of the crematory is discussed. Furthermore, emission of PCDDs/DFs from all crematories in Japan is estimated. The following results are obtained: (1) total concentration of PCDDs/DFs was 2.2-290 ng/N m3, whose TEQ concentration was 0.0099-6.5 ng TEQ/N m3; (2) total concentration of PCDFs was higher than that of PCDDs; (3) T4CDFs was the highest in the homologue pattern and 2,3,7,8-T4CDF was the highest in the isomer pattern; (4) emission of PCDDs/DFs was the largest in the first 20 min of cremation; (5) concentration of PCDDs/DFs was related to the existence of a secondary combustion chamber and a dust collector, and the ratio of the numbers of main and secondary combustion chambers; (6) total emission of PCDDs/DFs from crematories in Japan was estimated to be 8.9 g TEQ/yr.     

Reality and risk of contact-type head injuries related to bicycle-mounted child seats

Objective

The authors have treated numerous children who have been injured by falling from bicycle-mounted child seats. Despite the greatly increased use of such seats, the understanding of their risk and the importance of helmet use remains alarmingly poor. The objective of this study was to confirm the risk of bicycle-mounted child seats and to evaluate the efficacy of helmets, seat belts, and back seat height in terms of preventing or mitigating contact-type head impacts that occur in falls from bicycle-mounted child seats.

Materials and methods

Biometrical dummy tests were performed to examine contact-type head injuries in falls from stationary bicycles. A bicycle with an anthropometric test dummy placed in a bicycle-mounted child seat was tipped over. Each test was repeated three times and three-dimensional acceleration was measured using accelerometer. Head Injury Criteria (HIC) were calculated and the respective influences of a helmet, a seat belt, and increased height of the back of the seat on such impacts were evaluated.

Results

Only helmets unequivocally lowered maximal acceleration and/or HIC values with statistical significance. The seat belt lowered HIC values as long as it was used with the high-back seat. Only when the dummy wore a helmet sitting in a high-back seat did the HIC show less than the threshold of 570 for three-year-old children. The HIC showed the lowest score of 161.5 when the dummy wore both a helmet and a seat belt sitting in a high-back seat.

Conclusions

Riders in bicycle-mounted child seats definitely have higher risks of contact-type head injuries. In transporting a child on a bicycle-mounted child seat, parents must use both a child-bicycle helmet and a high-back child seat at least; a seat belt is highly recommended as long as it is used with the other safety devices.

Impact on Industry

The bicycle-mounted child seat should have a high enough back and an appropriate seat belt to protect the head of the child from a contact-type injury.     

Validation of diffusive mini-samplers for aldehyde and VOC and its feasibility for measuring the exposure levels of elementary school children

Exposure to various chemicals can cause adverse effects to health, such as asthma and allergies, especially in children. Data on personal exposure levels in children are scarce, thus small lightweight diffusive mini-samplers for aldehydes and volatile organic compounds (VOCs) were designed to measure the exposure level of children to these chemicals. The aim of the study was to validate and examine the applicability of these mini-samplers for measuring daily chemical exposure. The diffusive mini-samplers are 20 mm in length, 11 mm in diameter, and 1.67 g in weight. The devices are cylindrically shaped with polytetrafluoroethylene membrane filters placed at each end. To measure aldehydes and acetone, 20 mg of 2,4-dinitrophenylhydrazine was used as an absorbent. To measure VOCs, a carbon molecular sieve was used. The sampling rate for each chemical was determined by parallel sampling with active samplers in a closed exposure bag. The blank levels of the chemicals and the storage stability of the device were tested. The mini-samplers were compared to commercially available diffusive samplers. To examine the applicability of the samplers, 65 elementary school children carried them for 24 h. The sampling rates for formaldehyde, acetaldehyde, and acetone were 20.9, 22.9, and 19.7 mL min(-1), respectively. The limits of quantification (LOQ) for the 24-hour sampling by high-performance liquid chromatography/ultraviolet (HPLC/UV) analysis were 8.3, 7.6, and 8.8 μg m(-3) for formaldehyde, acetaldehyde, and acetone, respectively. The sampling rates for the 11 VOCs were determined and ranged from 3.3 mL min(-1) for styrene and 2-ethyl-1-hexanol to 11.7 mL min(-1) for benzene. The LOQ for the 24-hour sampling by gas chromatography-mass spectrometry (GC-MS) analysis ranged from 5.9-105.2 μg m(-3), 1.1-24.7 parts per billion. The storage stability after 5 days ranged from 94.8 to 118.2%. Formaldehyde, acetone, benzene, and toluene were detected above the LOQ in more than 90% of the children, and the median concentrations were 21.7, 20.9, 10.1, and 21.5 μg m(-3), respectively. This study shows that the diffusive samplers developed were suitable for children to carry and were capable of measuring the children's daily chemical exposure.     

Environmental assessment and accounting for the waste disposal stream in Bangkok,Thailand

It is very important that waste should be controlled and appropriately handled in a waste disposal stream, considering its impact on the environment. In this research, the LCA-EA model was applied to the current waste disposal stream of the BMR as well as other waste disposal stream scenarios, so that treatment cost, environmental load and environmental cost were assessed quantatively. The results of this study showed that in the current waste diposal stream in Bangkok, there were large contributions from carbon dioxide and methane to the greenhouse gas emissions from the stream. The study was able to quantify the reductions in environmental load associated with various waste disposal stream scenarios, using the baseline scenario as a standard.