Do we need to examine the quantitative data obtained from toxicity studies for both normality and homogeneity of variance?

Most of the statistical techniques used to evaluate the data obtained from toxicity studies are based on the assumption that the data show a normal distribution and homogeneity of variance. Literature review on toxicity studies on laboratory animals reveals that in most of the cases homogeneity of variance alone is examined for the data obtained from these studies. But the data that show homogeneity of variance need not always show a normal distribution. In fact, most of the data derived from toxicity studies, including hematological and biochemical parameters show a non-normal distribution. On examining normality of data obtained from various toxicity studies using different normality tests, we observed that Shapiro-Wilk test is more appropriate than Kolmogorov-Smimov test, Lilliefors test, the normal probability paper analysis and Chi square test. But there are situations, especially in the long-term toxicity studies, where normality is not shown by one or more than one of the dosage groups. In this situation, we propose that the data maybe analyzed using Dunnett multiple comparison test after excluding the data of the groups that do not show normality However, the biological relevance of the excluded data has to be carefully scrutinized. We also observed that the tendency of the data to show a normal distribution seems to be related to the age of the animals. Present paper describes various tests commonly used to test normality and their power, and also emphasizes the need of subjecting the data obtained from toxicity studies to both normality and homogeneity tests. A flow chart suggesting the statistical techniques that maybe used for both the types of data showing a normal or non-normal distribution is also proposed.     

Waste prevention for sustainable resource and waste management

Although the 2Rs (reduce and reuse) are considered high-priority approaches, there has not been enough quantitative research on effective 2R management. The purpose of this paper is to provide information obtained through the International Workshop in Kyoto, Japan, on 11–13 November 2015, which included invited experts and researchers in several countries who were in charge of 3R policies, and an additional review of 245 previous studies. It was found that, regarding policy development, the decoupling between environmental pressures and economy growth was recognized as an essential step towards a sustainable society. 3R and resource management policies, including waste prevention, will play a crucial role. Approaches using material/substance flow analyses have become sophisticated enough to describe the fate of resources and/or hazardous substances based on human activity and the environment, including the final sink. Life-cycle assessment has also been developed to evaluate waste prevention activities. Regarding target products for waste prevention, food loss is one of the waste fractions with the highest priority because its countermeasures have significant upstream and downstream effects. Persistent organic pollutants and hazardous compounds should also be taken into account in the situation where recycling activities are globally widespread for the promotion of a material-cycling society.     

Evaluating of arsenic(V) removal from water by weak-base anion exchange adsorbents

Arsenic contamination of groundwater has been called the largest mass poisoning calamity in human history and creates severe health problems. The effective adsorbents are imperative in response to the widespread removal of toxic arsenic exposure through drinking water. Evaluation of arsenic(V) removal from water by weak-base anion exchange adsorbents was studied in this paper, aiming at the determination of the effects of pH, competing anions, and feed flow rates to improvement on remediation. Two types of weak-base adsorbents were used to evaluate arsenic(V) removal efficiency both in batch and column approaches. Anion selectivity was determined by both adsorbents in batch method as equilibrium As(V) adsorption capacities. Column studies were performed in fixed-bed experiments using both adsorbent packed columns, and kinetic performance was dependent on the feed flow rate and competing anions. The weak-base adsorbents clarified that these are selective to arsenic(V) over competition of chloride, nitrate, and sulfate anions. The solution pH played an important role in arsenic(V) removal, and a higher pH can cause lower adsorption capacities. A low concentration level of arsenic(V) was also removed by these adsorbents even at a high flow rate of 250–350 h^?1. Adsorbed arsenic(V) was quantitatively eluted with 1 M HCl acid and regenerated into hydrochloride form simultaneously for the next adsorption operation after rinsing with water. The weak-base anion exchange adsorbents are to be an effective means to remove arsenic(V) from drinking water. The fast adsorption rate and the excellent adsorption capacity in the neutral pH range will render this removal technique attractive in practical use in chemical industry.     

Effects of climate change on coastal disasters: new methodologies and recent results

Humanity faces an increasing possibility that unusual and extreme natural disasters will increase, compounded with climate change, including global warming. These compound events are designated as compounded natural hazards in this study. A methodology must be developed for predicting what events and risks will confront future societies, to propose countermeasures and adaptation strategies against these events, and to evaluate the influences of compound disasters on infrastructure which is particularly situated near coasts and rivers. Based on the above-stated background and demands, this study was undertaken with the intention of upgrading the methodology for estimating effects on infrastructure of compound events such as increased typhoon and rainfall severity caused by global warming occurring concurrently with a great earthquake in Japan. Such a methodology is expected to contribute to progress in the fields of natural disaster mitigation and land preservation, particularly benefiting coastal and river areas in Japan. Additionally in this study, risk and economic loss analyses for the possible occurrence of compound disasters for coastal infrastructure and foundations are produced for establishing environmental strategies at the governmental level. The authors further propose adaptation strategies and techniques as countermeasures against these events.     

Novel enzymatic activity of cell free extract from thermophilic Geobacillus sp. UZO 3 catalyzes reductive cleavage of diaryl ether bonds of 2,7-dichlorodibenzo-p-dioxin

We characterized the ability of the cell free extract from polychlorinated dibenzo-p-dioxins degrading bacterium Geobacillus sp. UZO 3 to reduce even highly chlorinated dibenzo-p-dioxins such as octachlorodibenzo-p-dioxins in incineration fly ash. The degradation of 2,7-dichlorodibenzo-p-dioxin (2,7-DCDD) as a model dioxin catalyzed by the cell free extract from this strain implicates that the ether bonds of 2,7-DCDD molecule undergo reductive cleavage, since 4′,5-dichloro-2-hydroxydiphenyl ether and 4-chlorophenol were detected as intermediate products of 2,7-DCDD degradation.     

Monitoring OH-PCBs in PCB transport worker’s urine as a non-invasive exposure assessment tool

In this study, we analyzed hydroxylated polychlorinated biphenyls (OH-PCBs) in urine of both PCB transport workers and PCB researchers. A method to monitor OH-PCB in urine was developed. Urine was solid-phase extracted with 0.1% ammonia/ methanol (v/v) and glucuronic acid/sulfate conjugates and then decomposed using β-glucuronidase/arylsulfatase. After alkaline digestion/derivatization, the concentration of OH-PCBs was determined by HRGC/HRMS-SIM. In the first sampling campaign, the worker’s OH-PCB levels increased several fold after the PCB waste transportation work, indicating exposure to PCBs. The concentration of OH-PCBs in PCB transport workers’ urine (0.55~11 μg/g creatinine (Cre)) was higher than in PCB researchers’ urine (< 0.20 μg/g Cre). However, also a slight increase of OH-PCBs was observed in the researchers doing the air sampling at PCB storage area. In the second sampling, after recommended PCB exposure reduction measures had been enacted, the worker’s PCB levels did not increase during handling of PCB equipment. This suggests that applied safety measures improved the situation. Hydroxylated trichlorobiphenyls (OH-TrCBs) were identified as a major homolog of OH-PCBs in urine. Also, hydroxylated tetrachlorobiphenyls (OH-TeCBs) to hydroxylated hexachlorobiphenyls (OH-HxCBs) were detected. For the sum of ten selected major indicators, a strong correlation to total OH-PCBs were found and these can possibly be used as non-invasive biomarkers of PCB exposure in workers managing PCB capacitors and transformer oils. We suggest that monitoring of OH-PCBs in PCB management projects could be considered a non-invasive way to detect exposure. It could also be used as a tool to assess and improve PCB management. This is highly relevant considering the fact that in the next 10 years, approx. 14 million tons of PCB waste need to be managed. Also, the selected populations could be screened to assess whether exposure at work, school, or home has taken place.     

Bamboo–Fiber Filled High Density Polyethylene Composites: Effect of Coupling Treatment and Nanoclay

High density polyethylene (HDPE)/bamboo composites with different nanoclay and maleated polyethylene (MAPE) contents were fabricated by melt compounding. The compounding characteristics, clay dispersion, HDPE crystallization, and mechanical properties of the composites were studied. The equilibrium torque during compounding decreased with use of clay masterbatch and increased with the addition of MAPE. The X-ray diffraction (XRD) data showed that the clay was exfoliated only when 1% clay was added to pure HDPE without MAPE. For HDPE/bamboo systems, MAPE was necessary to achieve clay exfoliation. For pure HDPE system, both dynamic and static bending moduli increased, while impact strength decreased with increased clay loading. For the HDPE/bamboo fiber composites, tensile strength, bending modulus and strength were improved with the use of MAPE. The use of the clay in the system led to reduced mechanical properties. Techniques such as pre-coating fibers with clay–MAPE mixture are needed to enhance the synergetic effect of the clay and bamboo fiber on the composite properties in the future study.     

Dietary uptake kinetics of polychlorinated biphenyls from sediment-contaminated sandworms in a marine benthic fish (Pseudopleuronectes yokohamae)

To evaluate the dietary uptake of polychlorinated biphenyls (PCBs) from live food, we investigated the dietary uptake and depuration kinetics of PCBs in a marine benthic fish (marbled sole, Pseudopleuronectes yokohamae) by using as food live sandworms (Perinereis nuntia) that were laboratory-exposed to field-collected PCB-contaminated sediment. Marbled sole were fed the PCB-contaminated sandworms for 28 d and then uncontaminated sandworms for 56 d. The assimilation efficiencies (AEs) of 84 PCB congeners via the gastrointestinal tract (GIT) to the muscle of the fish ranged from 0.21 to 0.78; whole-body AEs would be lower than those of muscle because of the lower PCB concentrations, on a lipid basis. The AEs determined in this study were lower than those in other studies that used PCB-spiked commercial pelletized food. The lower AEs found in this study might be attributable to differences in the food administered (live sandworms vs. commercial pellet food), possibly because of low digestibility of sandworm lipids by marbled sole. In addition, the AEs in this study tended to increase with increasing log octanol-water partition coefficients (K_OW) up to about seven, although AEs in the other studies using commercial pelletized food did not increase with increasing log K_OW. This result suggests the co-transport of highly hydrophobic PCB congeners along with lipids and fatty acids from the digested sandworms into the GIT epithelium cells. The growth-corrected half-lives of 26 PCB congeners in the muscle of fish ranged from 20 to 107 d.     

Residual congener pattern of dioxins in human breast milk in southern Vietnam

This study evaluated residual congener patterns of dioxin/furan (=PCDD/DF) related to tactical herbicides aerially sprayed over the regions of southern Vietnam through Operation Ranch Hand. The study focused on Cam Chinh (CC) commune, Quang Tri province (an area sprayed with tactical herbicides), and the Cam Phuc (CP) commune, Ha Tinh province (a non-sprayed area). Breast milk samples for analysis were collected in September 2002 and July 2003 from lactating primiparous and multiparous mothers born after the war (<31 years old). We found the levels of each congener in the CC commune were higher than in the CP commune, and determined specificity in the PCDD/DF congener pattern in CC commune samples by cluster analysis. The congener pattern is characterized by higher (the hexa-, the hepta-, and the octa-) chlorinated PCDD/DFs; this appears to be the same profile as that presented by pentachlorophenol (PCP), rather than 2,4,5-trichlorophenoxy acid (2,4,5-T) contaminated with 2,3,7,8-TCDD. A GC/MS study in the 1970s detected the chlorophenols 2,4-di and 2,4,6-trichlorophenol in some Agent Orange samples, which contained, like PCP, a wide variety of PCDD/DF congeners. In this context, it may be expected that certain tactical herbicides contaminated with various chlorophenol impurities, have a unique congener pattern when compared with pure 2,4,5-T formulations.     

Performance evaluation of intermediate cover soil barrier for removal of heavy metals in landfill leachate

This pilot-scale study evaluated the use of intermediate cover soil barriers for removing heavy metals in leachate generated from test cells for co-disposed fly ash from municipal solid waste incinerators, ash melting plants, and shredder residue. Cover soil barriers were mixtures of Andisol (volcanic ash soil), waste iron powder, (grinder dust waste from iron foundries), and slag fragments. The cover soil barriers were installed in the test cells' bottom layer. Sorption/desorption is an important process in cover soil bottom barrier for removal of heavy metals in landfill leachate. Salt concentrations such as those of Na, K, and Ca in leachate were extremely high (often greater than 30 gL(-1)) because of high salt content in fly ash from ash melting plants. Concentrations of all heavy metals (nickel, manganese, copper, zinc, lead, and cadmium) in test cell leachates with a cover soil barrier were lower than those of the test cell without a cover soil barrier and were mostly below the discharge limit, probably because of dilution caused by the amount of leachate and heavy metal removal by the cover soil barrier. The cover soil barriers' heavy metal removal efficiency was calculated. About 50% of copper, nickel, and manganese were removed. About 20% of the zinc and boron were removed, but lead and cadmium were removed only slightly. Based on results of calculation of the Langelier saturation index and analyses of core samples, the reactivity of the cover soil barrier apparently decreases because of calcium carbonate precipitation on the cover soil barriers' surfaces.