用不同震级阈值的地震目录估计汾渭地震带的地震危险性

本文在肯定有史以来地震目录(资料)在各历史时期具有不等的完整性,即地震目录在整个历史时期不均匀的前提下,采用处理不同阈值资料的极大似然法,计算了汾渭地震带的地震危险性参数。     

中国生态工业园初探

工业化是中国实现现代化与可持续发展的必经阶段 ,但面临着严重的资源与环境问题。本文总结了世界生态工业园的理论与实践 ,分析了中国建立生态工业园的必要性 ,并从时间维、空间维、机制维、职能维等方面探讨了加强中国生态工业园的建设。     

关于建立资源与环境快速反应系统的探讨

本文阐述了国家快速反应系统的概念及其作用。以建立资源与环境快速反应系统为例,说明建立系统的必要性、系统的内容、组成及技术指示。     

不同含碳量天然气脱碳方案选择

分析国内外常用脱碳方法和各油气田不同含碳量天然气脱碳实例,比较各种脱碳方案的操作条件、适用范围以及优缺点,给出不同含碳量天然气的脱碳方案:当含碳量为2%～10%时可选用常规醇胺法、热碳酸钾法、物理-化学吸收法、变压吸附法;当含碳量为10%～30%时可选用活化MDEA法、热碳酸钾法、物理吸收法、物理-化学吸收法;当含碳量为30%～70%时可选用改良热碳酸钾法、物理吸收法、物理-化学吸收法、膜分离法+常规醇胺法、膜分离法+热碳酸钾法;当含碳量大于70%时可选用低温分离法、膜分离法+化学吸收法。     

安监职责误读与责任主体虚拟--中国矿难难治主因之剖析

自1950年河南宜洛煤矿瓦斯爆炸死亡174名矿工后的55年间,我国死亡人数超过百人的煤矿矿难共有22起.其中2004和2005两年就多达6起,占总数的1/4强,尤其是2005年,一年之内就发生4起,死亡600多人,其频率之高是建国以来年均起数的10倍.     

重型柴油车车载排放实测与加载影响研究

采用车载排放测试仪,对2辆重型柴油卡车在空载和加载条件下进行实际道路车载排放测试.通过分析获得了油耗与排放速率的速度-加速度及其工况点的分布,发现高油耗与高排放工况点主要集中在高速加速区域,加载时油耗与排放高值随工况点分布更广;车辆在(30±2.5)km·h^-1等速及加速行驶时受加载影响最大,此时加载油耗与排放约是空载的1.6～3.2倍左右;由实测结果发现,卡车Ⅰ和卡车Ⅱ加载时油耗及CO、HC、NO_x排放因子分别是空载的1.6倍、3.5倍、1.1倍、1.5倍以及1.2倍、1.0倍、0.9倍和1.5倍,加载对油耗与NO_x排放影响最为明显,对HC影响最小,CO影响取决于车辆保养水平;卡车Ⅱ较卡车Ⅰ车型更大,发动机功率更高,相同荷载时受加载影响较小,说明重型车在发动机负荷可承受的范围内合理装载,有助于避免油耗与排放恶化,提高燃油经济性和排放水平.     

HCHs and DDTs in sediment-dwelling animals from the Yangtze Estuary, China

HCHs and DDTs in sediment-dwelling animals including mollusks and crabs from the Yangtze Estuary were determined by GC-ECD. Levels of t-HCH were in the range of 1.2-5.5 ng g(-1) and averaged 3.5 ng g(-1) in mollusks, while t-DDT concentrations ranged from 26.0 to 68.8 ng g(-1), with a mean of 34.5 ng g(-1). In crabs t-HCH concentrations varied from 2.0 to 25.7 ng g(-1) and averaged 13.8 ng g(-1), whereas the concentrations of t-DDT were in the range of 1.5-24.8 ng g(-1) with a mean value of 5.9 ng g(-1). The HCHs and DDTs levels depend on geographical position and sources, showing the high levels at fresh water area in the estuary, such as XP, CM and LHK sites, and lower at brackish water area, such as FX site, and little difference between species. Results also indicate there was no significant relationship between t-HCH (t-DDT) concentrations and lipid contents both in mollusks and crabs because of non-equilibrium state under a specific estuarine dynamics; smaller individuals accumulated more HCHs and DDTs than larger individuals of mollusks at LHK site, showing different uptake rate for these pesticides; moreover, HCHs and DDTs levels were lower in female crab bodies than male crab bodies suggesting that the release of spawning. BSAFs (Biota- Sediment Accumulation Factors) from sediment-dwelling animals for HCHs and DDTs show a significant "one high with two low" and "one low with two high" effect in the Yangtze Estuary.     

Particle generation by ultraviolet-laser ablation during surface decontamination

A novel photonic decontamination method was developed for removal of pollutants from material surfaces. Such a method relies on the ability of a high-energy laser beam to ablate materials from a contaminated surface layer, thus producing airborne particles. In this paper, the authors presented the results obtained using a scanning mobility particle sizer (SMPS) system and an aerosol particle sizer (APS). Particles generated by laser ablation from the surfaces of cement, chromium-embedded cement, and alumina were experimentally investigated. Broad particle distributions from nanometer to micrometer in size were measured. For stainless steel, virtually no particle > 500 nm in aerodynamic size was detected. The generated particle number concentrations of all three of the materials were increased as the 266-nm laser fluence (millijoules per square centimeter) increased. Among the three materials tested, cement was found to be the most favorable for particle removal, alumina next, and stainless steel the least. Chromium (dropped in cement) showed almost no effects on particle production. For all of the materials tested except for stainless steel, bimodal size distributions were observed; a smaller mode peaked at approximately 50-70 nm was detected by SMPS and a larger mode (peaked at approximately 0.70-0.85 microm) by APS. Based on transmission electron microscopy observations, the authors concluded that particles in the range of 50-70 nm were aggregates of primary particles, and those of size larger than a few hundred nanometers were produced by different mechanisms, for example, massive object ejection from the material surfaces.     

环境管理日常监督检查的规范化

介绍了洛阳分公司在环境管理中实施的一套有效的日常监督检查机制,及时发现和纠正偏差,提高了环境管理体系的运行效率。     

Experimental study on non-destructive testing of rock bolts based on pseudo-random signal

The quality of rock bolt anchoring is closely related to the stability and safety of underground engineering and slope protection. In this paper, non-destructive testing of rock bolts is proposed based on pseudo-random signal, owing to the deficiencies of the conventional detecting method of stress wave reflection. The characteristics of pseudo-random signal for non-destructive testing of rock bolts are introduced. And the rock bolts are tested in the experiment, the time of reflection wave is identified and the length of rock bolts is calculated through cross correlation analysis between the extracted wavelet signal and the test signal. It is proved that the testing results of non-destructive testing methods based on pseudo-random signal are of low deviation. The experiment has shown that non-destructive testing of rock bolts based on pseudo-random signal is feasible with high precision.