广东省森林植被碳储量空间分布格局

基于广东省2007年森林资源清查档案数据,采用材积源生物量法,量化广东省森林植被碳储量,研究广东省森林植被碳储量空间分布格局。结果表明,广东省森林植被碳储量为246.35Tg,碳密度为22.96mg·hm-2。受人为干扰和环境因素的影响,广东省森林植被碳储量在不同经济区和流域空间分布格局严重不均。就不同经济区而言,粤北及周边经济区森林植被碳储量最大,达180.22Tg;珠三角经济区次之,为34.60Tg;接着是粤西沿海经济区,为21.49Tg;粤东沿海经济区最小;仅为10.04Tg。在不同流域方面,森林植被碳储量依次为：北江流域〉东江流域〉西江流域〉韩江流域〉其他流域。广东省乔木林碳储量为202.85Tg,以中幼龄林为主,占77.1%;乔木林龄组结构与碳密度近乎成正比关系,存在较大的相关性。     

(N-[2-(2-氧-1-咪唑烷基)乙基]-N '-苯基脲(EDU)对环境臭氧胁迫下的水稻和小麦生长的影响

通过对作物定期喷施不同浓度(0、150、300和450 mg·L-1)的N-[2-(2-氧-1-咪唑烷基)乙基]-N'-苯基脲(ethy lenediurea,EDU)溶液,研究EDU对环境O3胁迫下水稻“粤晶丝苗2号”(Oryza sativa L.Yuejingsi 2)和小麦“北农9549”(Triticum a...     

办公室地面灰尘中PAHs污染的时间变化规律及人体健康风险

为探究室内地面灰尘中15种多环芳烃(PAHs)污染的时间变化规律,于2012年3—7月对北京市一座办公楼内的某办公室进行了每周一次的连续高密度灰尘样品采集。利用高效液相色谱-荧光检测器检测15种PAHs含量。结果表明,该办公室内灰尘样品中∑PAHs浓度范围为1 180~24 300 ng·g~(-1),平均浓度为8 960 ng·g~(-1)。总体上,检出的PAHs以3环PAHs为主,其中菲占PAHs总量的59%以上,其次是4环和5环PAHs,4环PAHs中占的比重最高,约占4环PAHs总量的34%。该办公室内灰尘中∑PAHs的浓度存在显著的时间变化差异,总体表现为∑PAHs浓度随气温升高而降低的趋势。源解析结果显示,机动车排放源、石油源、木材与煤燃烧是北京市室内灰尘中PAHs的主要来源。健康风险评估结果显示,ILCR皮肤接触ILCR手口摄入,且CR均值大于10-6,说明该采样点的PAHs污染存在"潜在致癌风险"。     

纳米材料对藻细胞毒性效应及致毒机理

纳米材料因其独特的性质被广泛应用于生物医疗、光学工程、催化等领域。随着纳米材料的生产量逐年增大,越来越多的纳米粒子被释放到水生生态环境中,其生态毒性效应影响也备受人们的关注。本文根据纳米材料的分类总结了不同种类纳米材料对水生生态系统的初级生产者藻类的毒性效应,归纳了纳米材料影响藻类毒性大小的主要因素,如纳米材料的物理化学性质、水体性质和藻种等,并探讨了纳米材料对藻类的致毒机理,如金属离子溶出、氧化损伤和遮光效应等,最后总结展望了纳米毒理学研究的发展方向,以期为纳米材料对藻类的毒性研究提供一定的理论依据。     

多氯联苯醚类化合物污染研究进展

综述了当前国际上多氯联苯醚的研究现状,详细论述了环境中多氯联苯醚的来源、毒性效应、污染状况、迁移转化和生物富集规律以及多氯联苯醚形成机制.我国关于多氯联苯醚类污染物的研究相对滞后,当前开展适合我国国情的多氯联苯醚物质的环境水平、生态安全与毒理学研究十分必要.     

污泥吸附剂对3种染料吸附动力学的研究

以污水厂脱水污泥、锯末和焦油的混合物为原料,选择ZnCl₂为活化剂制备出过渡孔发达、强度大的污泥吸附剂（S-AC）。借助BET、FT-IR等现代分析测试方法对污泥吸附剂进行表征,同时,研究了吸附剂对酸性大红、中性红和碱性品红吸附动力学行为。结果表明,制得的污泥吸附剂BET比表面积为358 m²/g,强度大于89%。吸附剂的动力学数据均符合伪二阶动力学方程、液膜扩散方程和颗粒内扩散方程,其中液膜扩散为吸附剂对酸性大红吸附过程的主控步骤,颗粒内扩散为吸附剂对中性红和碱性品红吸附过程的主控步骤。     

聚二甲基二烯丙基氯化铵与聚合硫酸铁复合絮凝剂的制备及应用研究

在一定温度下 ,将聚二甲基二烯丙基氯化铵 (PDMDAAC)溶解在聚合硫酸铁 (PFS)中 ,制成稳定的均相复合溶液。采用FT IR和X 射线衍射对其固体结构进行了分析。考察了液体复合絮凝剂的稳定性和固体复合絮凝剂的吸湿溶解性能 ,及其对生活污水的处理效果。结果表明 :在 6 0℃以下制备的液体复合絮凝剂具有良好的稳定性 ,固体复合絮凝剂具有良好的溶解性和比PFS更强的吸湿性 ;复合絮凝剂不是由PDMDAAC与PFS简单的机械混和 ,而是互相融合的复合体系 ;具有比PFS更优的去污性能和与PFS类似的较宽的最佳投药范围和 pH适用范围。对浊度和COD分别为 10 5 2和 187 5mg/L ,pH值为 7 5 9的生活污水 ,复合絮凝剂中Fe3 + 和PDMDAAC最佳用量分别为 5 4 .15和 4 2 7mg/L ,对COD的去除率为 77 14 % ,比PFS在用量为 81 2 2mg/L时的最佳效果高 12 %。     

Estimation and characterization of PCDD/Fs and dioxin-like PCBs from Chinese iron foundries

The iron foundry industry is considered to be a potential source of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs). This study investigated the emission factors and total emission amounts of PCDD/Fs and dioxin-like polychlorinated biphenyls (DL-PCBs) from iron foundries in China. The concentrations and the World Health Organization toxicity equivalents (WHO-TEQs) are presented and the congener profiles are discussed in this paper.In the present work, 26 fly ash samples were collected and tested to quantify the PCDD/Fs and DL-PCBs generated by 14 plants of different scales, and five stack gas samples were collected from two (named as EFG and LFG) of those plants. The emission levels of PCDD/Fs and DL-PCBs indicated that hot-air cupolas had lower emissions than cold-air cupolas. When iron ore lump and sinter were used as raw material, the emission factors were about 250 ng TEQ t⁻¹ of product. However, if the raw material was scrap, the emission factors varied owing to the different contents of organic materials in the raw materials. It was found that the mean WHO-TEQ values of PCDD/Fs and DL-PCBs were 144 and 34.2 pg Nm⁻³ in stack gas and 20.0 and 1.58 pg g⁻¹ in fly ash. In multiple tests, it was estimated that the mean emission factors of PCDD/Fs and DL-PCBs were 365 and 10.9 ng WHO-TEQ t⁻¹ released to residue and 2719 and 555 ng TEQ t⁻¹ released to air. The total emission amounts of PCDD/Fs and DL-PCBs from Chinese iron foundries with cupola furnaces released to residue and air were 16.8 and 146 g WHO-TEQ in 2008, respectively.     

一体化间歇曝气完全混合活性污泥法

一体化间歇曝气完全混合活性污泥法处理装置采取特殊的沉淀区构造,改变了活性污泥的循环流动方式,通过间歇曝气,反应区交替处于好氧/缺氧状态,达到了有机物高效去除、高效硝化反硝化及控制污泥膨胀的效果.该方法具有出水水质好、运行稳定、能耗低、流程简洁和操作管理方便的特点,是一种很有发展潜力的一体化中小型生活污水、城市污水处理系统.     

Estimation and characterization of unintentionally produced persistent organic pollutant emission from converter steelmaking processes

Unintentionally produced persistent organic pollutants (UP-POPs) including polychlorinated dibenzo-p-dioxins, and dibenzofurans (PCDD/Fs), polychlorinated biphenyls (PCBs), and polychlorinated naphthalenes (PCNs) were characterized and quantified in stack gas and fly ash from the second ventilation systems in five typical converters in five different steelmaking plants. The 2378-substituted PCDD/Fs (2378-PCDD/Fs) and dioxin-like PCB (dl-PCBs) toxic equivalents (TEQs) were 1.84–10.3 pg WHO-TEQ Nm^?3 in the stack gas and 5.59–87.6 pg WHO-TEQ g^?1 in the fly ash, and the PCN TEQs were 0.06–0.56 pg TEQ Nm^?3 in the stack gas and 0.03–0.08 pg TEQ g^?1 in the fly ash. The concentrations of UP-POPs in the present study were generally lower than those in other metallurgical processes, such as electric arc furnaces, iron ore sintering, and secondary metallurgical processes. Adding scrap metal might increase UP-POP emissions, indicating that raw material composition was a key influence on emissions. HxCDF, HpCDF, OCDF, HpCDD, and OCDD were the dominant PCDD/Fs in the stack gas and fly ash. TeCB and PeCB were dominant in the stack gas, but HxCB provided more to the total PCB concentrations in the fly ash. The lower chlorinated PCNs were dominant in all of the samples. The 2378-PCDD/F, dl-PCB, and PCN emission factors in stack gases from the steelmaking converter processes (per ton of steel produced) were 1.88–2.89, 0.14–0.76_, and 229–759 μg t^?1, respectively.