Global variability of food waste chemical composition and its consequences on the production of biofuels and chemical compounds

Journal of Material Cycles and Waste Management - The use of food waste (FW) for the production of biofuels and value-added compounds is growing worldwide. However, the significant chemical...     

Removal of Hg2+ ions by adsorption using (TiO2@MnO2)-NPs nanocomposite

Journal of Material Cycles and Waste Management - Waste water contaminated with inorganic mercury is considered a serious environmental problem, mainly due to the hazardous effects this contaminant...     

Change in the antimicrobial resistance profile of Pseudomonas aeruginosa from soil after exposure to herbicides

The extensive use of pesticides represents a risk to human health and to the environment. This study aimed to investigate if the exposure to atrazine and diuron, two herbicides widely used in Brazil, could induce changes in the susceptibility profile to aztreonam, colistin and polymyxin B antimicrobials in isolates of P. aeruginosa obtained from soil samples by using the determination of minimum inhibitory concentration (MIC) test. Three isolates had an increase of MIC to aztreonam after exposure to both herbicides and one isolate did not show any MIC change. The MexAB-OprM efflux pump has already been upregulated in these isolates and the herbicides atrazine and diuron did not increase MexAB-OprM overexpression. Therefore, the decrease in aztreonam susceptibility was not directly related to this pump, suggesting that probably other mechanisms should be involved.     

Composites Produced from Natural Rubber and Chrome-Tanned Leather Wastes: Evaluation of their In Vitro Toxicological Effects for Application in Footwear and Textile Industries

A new composite has been developed from natural rubber and chrome-tanned leather waste for use in footwear and textile industries. The contribution of this material to environmental quality and sustained development should be highligh because chrome tanned leather wastes, a major environmental problem, can be recycled. However, the safety of this new material for human use is questionable, as it is already well reported in the literature that chromium, particularly in its hexavalent oxidation state, can be genotoxic and carcinogenic to living beings. Thus, the aim of this study was to evaluate in vitro biocompatibility of this composite material for possible use in the footwear and textile industries, through cytotoxicity, cell adhesion, and genotoxicity tests. Inductively coupled plasma optical emission spectrometry (ICP-OES) was used to measure both concentrations of total and hexavalent chromium. Based on the findings, it was concluded that the composite exhibits low levels of cytotoxicity and genotoxicity, and possesses favorable properties for initial cell adhesion. Furthermore, it was verified that the composites released low concentrations of chromium and that the predominant species released would be trivalent chromium. The results of the present study open the possibility of the incorporation of solid residues of tanned leather into chromium without necessarily the chromium contained in these residues influences the toxicity and genotoxicity of this new material.     

Rapid and Low-Cost Method for Evaluation of Nutrient Release from Controlled-Release Fertilizers Using Electrical Conductivity

Methods to determine nutrient release rates of coated fertilizers usually rely on chemical analyses, which often are time-consuming and/or expensive. Our goal was to develop an innovative and rapid low-cost method to evaluate nutrient release from polymer coated MAP or urea using conductometry. The release in water is determined by measuring the electric conductivity (EC) over time, with intervals dependent on release rates. In the case of soluble salt fertilizers, EC can be immediately determined and converted to a concentration using a calibration curve. In the case of urea, an additional step is needed to convert the neutral urea into ammonium. The release rates in water were assessed for a range of commercial and laboratory-coated fertilizers. A validation test demonstrated strong agreement with the release determined using analytical techniques. The EC method hence offers an easy way to quickly evaluate the time course of release of nutrients from controlled-release fertilizers.     

Using a noise monitoring station in a small quarry located in an urban area

Mining plays an important role in Brazilian exports. On the other hand, large urban centers like São Paulo, with approximately 21 million inhabitants, also demand an increasing domestic consumption of natural resources, such as construction aggregate. There are many quarries located in the surroundings of urban centers in Brazil, competing with the growth of urbanized areas. Such proximity leads to a series of conflicts involving quarries and surrounding communities, where the increase in noise levels is highlighted. Operations in quarries, in general, are intermittent. Noisier equipment, such as drilling rigs and primary crushers, operates only a few hours during the day, while other operations, such as screening and secondary and tertiary crushing, are more constant. This paper presents a study carried out in a quarry located near São Paulo, where in addition to conventional short term noise measurements at surrounding receptors, one noise monitoring station was installed, allowing to identify the noisiest moments during the quarry operating time. Through data transmitted by wireless technology, it was possible to follow the noise variations emitted from mining activities in real time and observe the noisiest events that were recorded for events that exceeded the established standards. A mobile application associated to this monitoring station facilitated the quarry’s manager and employees to access immediately the monitoring information. Therefore, by using this system, it was possible to evaluate the effectiveness of noise reduction measures already taken and indicate what steps still need to be held.     

Management of sludge from fish ponds at the edge of the Itaparica Reservoir (Brazil): an alternative to improve agricultural production

Sludge generated in intensively managed tilapia fingerling breeding ponds near the Itaparica Dam in the semi-arid Brazilian northeastern region was tested as a soil conditioner to produce lettuce in an effort to mitigate the present environmental impact of the deposition of this sludge, thereby giving it a productive destiny. A greenhouse experiment was performed by mixing the sludge with a Haplic Planosol topsoil, a characteristic soil of the region, so that the sludge corresponded to 0, 25, 50, 75, and 100% of the mixture (substrate). The experiment was set up as a randomized block design with five blocks, each with three pots (5-kg substrate per pot) of the five sludge proportion treatments. One lettuce plant was transplanted into each pot, maintained under greenhouse conditions, and harvested 35 days after transplanting. Sludge, soil, and the substrates were evaluated for nutrient concentration and physical characteristics. Green and dry weights, stem diameter, and nitrogen, phosphorus, and potassium concentrations in the aboveground parts of the lettuce plants were determined. Sludge incorporation into the substrate improved its chemical and physical characteristics. The lettuce plants grew best in the substrate with 75% sludge, increasing its biomass production by 50% and more than doubling its nitrogen uptake.     

Sugar–alcohol industry: quality of its biotreated washing water for reuse in fertigation

All processes in agro-industries consume water and generate large volumes of nutrient-rich effluents. To recycle effluents from a sugar–alcohol industry in the Northeastern Brazil (Coruripe, Alagoas), the effect of a daily application of a microbial formulation (containing five indigenous bacteria and two fungi), at the entrance of the two first facultative ponds (D, E) of its treatment plant formed by seven ponds (A–G), was evaluated in the sugarcane harvests of 2014/2015 and 2015/2016. Fortnightly, the values of 11 physicochemical parameters were checked and statistically compared (one and two-way ANOVA) in untreated (sedimentation pond A) and post-treated effluent (last facultative pond G), during both harvests. The treated effluent presented statistically significant improvements (p > 0.05), even between harvests, with averages of removal of organic matter of ca. 79.21% and 90.62%, and increases of the dissolved oxygen (DO) of ca. 72% and 74%, as well as the average increase of pH was ca. 42% and 50%. This better quality residue generally satisfied the class III level of the Brazilian Resolution 357/2005 (National Council for the Environment (CONAMA)), for water reuse in sugarcane irrigation on the yellow clay latosol soil, since it still is a light source of organic matter, nitrites and phosphorus, reducing the need of fertilizers for maintaining the productivity with low risk of salinization. According to Pearson’s bivariate correlation coefficient, while the DO and pH have positive correlation, they both have general inverse relation with the other physicochemical parameters evaluated and vice versa.     

The effects of field-realistic doses of imidacloprid on Melipona quadrifasciata (Apidae: Meliponini) workers

Environmental Science and Pollution Research - The presence of Brazilian native bees can improve tomato production by increasing pollination effectiveness. However, the extensive use of pesticides...     

Do tailings from the Mariana,MG (Brazil), disaster affect the initial development of millet,maize, and sorghum?

Environmental Science and Pollution Research - The collapse of the Fundão dam in Mariana, MG, in 2015 resulted in the overflow of more than 50 million m3 of mud containing mine tailings,...