Effect of sulphur and phosphorus on yield, quality and nutrient status of pigeonpea (Cajanus cajan)

A field experiment was conducted to study the impact of Sulphur(S) and Phosphorus (P) on yield, nutrient status of soil and their contents in pigeonpea (Cajanus cajan) during the year 2008-2009. Seven treatments were studied in Factorial Randomized Block Design with three replications. The treatment combinations were derived from three levels of sulphur (0, 20 and 40 kg S ha(-1)) and four levels of phosphorus (0, 25, 50 and 75 kg ha(-1)). The experimental soil was medium black, slightly calcareous, clay in texture and slightly alkaline in reaction. The results indicated a significant increase in grain yield (14.81 q ha(-1)) and straw yield (41.26 q ha(-1)) of pigeonpea after 20 kg S ha(-1) and 50 kg P2O5 ha(-1) treatment with common dose of nitrogen @ 30 kg ha(-1). The increase in grain and straw yield was 102.77 and 52.87% as compare to higher over control. Maximum number of pods plant(-1), maximum number of grains pod and test weight by this treatment was also observed as compared to control. Application of S and P improved soil fertility status and S alone did not influence P availability. Hence, in order to maintain the fertility status of the soil at high level, combine application of 20 kg S ha(-1) with 50 kg P2O5 ha(-1) is essential. The residual fertility status of soil is advocated for rainfed pigeonpea crop grown on vertisol in Vidarbha region.     

Modeling soil and plant phosphorus within DSSAT

The crop models in the Decision Support System for Agrotechnology Transfer (DSSAT) have served worldwide as a research tool for improving predictions of relationships between soil and plant nitrogen (N) and crop yield. However, without a phosphorus (P) simulation option, the applicability of the DSSAT crop models in P-deficient environments is limited. In this study, a soil-plant P model integrated to DSSAT was described, and results showing the ability of the model to mimic wide differences in maize responses to P in Ghana are presented as preliminary attempts to testing the model on highly weathered soils. The model simulates P transformations between soil inorganic labile, active and stable pools and soil organic microbial and stable pools. Plant growth is limited by P between two concentration thresholds that are species-specific optimum and minimum concentrations of P defined at different stages of plant growth. Phosphorus stress factors are computed to reduce photosynthesis, dry matter accumulation and dry matter partitioning. Testing on two highly weathered soils from Ghana over a wide range of N and P fertilizer application rates indicated that the P model achieved good predictability skill at one site (Kpeve) with a final grain yield root mean squared error (RMSE) of 535 kg ha⁻¹and a final biomass RMSE of 507 kg ha⁻¹. At the other site (Wa), the RMSE was 474 kg ha⁻¹ for final grain yield and 1675 kg ha⁻¹ for final biomass. A local sensitivity analysis indicated that under P-limiting conditions and no P fertilizer application, crop biomass, grain yield, and P uptake could be increased by over 0.10% due to organic P mineralization resulting from a 1% increase in organic carbon. It was also shown that the modeling philosophy that makes P in a root-free zone unavailable to plants resulted in a better agreement of simulated crop biomass and grain yield with field measurements. Because the complex soil P chemistry makes the availability of P to plants extremely variable, testing under a wider range of agro-ecological conditions is needed to complement the initial evaluation presented here, and extend the use of the DSSAT-P model to other P-deficient environments.     

A hydrochemical elucidation of the groundwater composition under domestic and irrigated land in Jaipur City

The study area Jaipur, the capital of Rajasthan, is one of the famous metropolises in India. In order to know the suitability of groundwater for domestic and irrigation purposes in Jaipur City, groundwater samples were composed of 15 stations during post-monsoon time of the year 2007–2008 (Nov 2007 to Feb 2008) and were analyzed for physicochemical characters. The physicochemical parameters of groundwater participate a significant role in classifying and assessing water quality. A preliminary characterization, carried out using the piper diagram, shows the different hydrochemistry of the sampled groundwater. This diagram shows that most of the groundwater samples fall in the field of calcium-magnesium-chloride-sulfate type (such water has permanent hardness) of water. Data are plotted on the US Salinity Laboratory diagram, which illustrates that most of the groundwater samples fall in the field of C2S1 and C3S1, which can be used for irrigation on almost all type of soil with little danger of exchangeable sodium. Based on the analytical results, chemical indices like %Na, SAR, and RSC were calculated which show that most of the samples are good for irrigation.     

Work-Related Musculoskeletal Disorders,Job Stressors and Gender Responses in Foundry Industry

The main aim of this paper was to identify job stressors, gender responses and association of psychosocial work stressors with prevalence of work related musculoskeletal disorders (MSDs) among foundry workers. The data were obtained with ergonomics checklist using Likert scale. The results of this study showed a high prevalence of MSDs among workers. The male workers were more prone to pain in neck while the female workers were more prone to MSDs in upper back and shoulders. Correlation analysis showed significant relationship of dimensions of work aspects with pain and discomfort. It proved that the work-related MSDs are the results of interaction of multiple stressors associated with work and work environment, and other personal factors. ANOVA indicated that the perception of work aspects as stressors differed significantly between male and female workers.     

Pyrolysis of jute dust: effect of reaction parameters and analysis of products

Biowastes are becoming potential feedstocks for direct utilization or conversion to solid, liquid and gaseous fuels via various thermochemical routes. In this regard, jute dust which is a major agro-industrial waste in jute mills was pyrolysed in a fixed-bed reactor with an aim to study the product distribution and their characterization and to identify the optimum condition for bio-oil yield. The investigated process variables were temperature (400–700 °C), heating rate (10 and 40 °C/min) and nitrogen gas flow rate (50–250 ml/min). The yield of bio-oil is found to be maximum at 500 °C with a heating rate of 40 °C/min. However, further increase in temperature leads to decrease in bio-oil yield. Chemical compositions of the bio-oils were investigated using chromatographic and spectroscopic techniques such as ¹H NMR, FTIR and GC–MS. The heating value of the bio-oil is 26.71 MJ/kg. The study shows that jute dust have potential for conversion to bio-oil through the process of pyrolysis to supplement the petro-derived liquid fuel for heating and transportation applications after upgrading. The biochar produced as a co-product of jute dust pyrolysis can be a potential soil amendment with multiple benefits including increased soil fertility and C-sequestration.     

Impact of alkaline-hydrolyzed biosolids (Lystek) addition on the anaerobic digestibility of TWAS in lab – And full-scale anaerobic digesters

The effect of different Lystek biosolids doses on the anaerobic digestability of thickened waste activated sludge (TWAS) was evaluated in a lab- and full-scale anaerobic digester. The overall findings of this study emphasize the beneficial impact of Lystek addition to the lab- and full-scale anaerobic digesters in terms of enhanced biogas production and increased volatile suspended solids reduction (VSSR) efficiency. Lystek added at 4% by volume to TWAS increased the methane yield from 0.22 to 0.26 L CH₄/g VSS_added at an solids retention time (SRT) of 10 days, and from 0.27 to 0.29 L CH₄/g VSS_added at an SRT of 15 days. Furthermore, the VSSRs of 37% and 47% were observed for the TWAS, and the TWAS with 4% Lystek, while at an SRT of 15 days, the observed VSSR were 49% and 58%, respectively. The lab-scale study showed that the influence of Lystek addition on methane yield and solids destruction efficiencies was more pronounced at the shorter SRT, 20% enhancement (SRT of 10 d) vs. 9% enhancement (SRT of 15 d) for methane yield, and 27% (SRT of 10 d) vs. 22% (SRT of 15 d) for VSS destruction efficiency improvement. Furthermore, addition of 4% of Lystek to the feed of the full-scale anaerobic digester at St. Marys wastewater treatment plant (WWTP) resulted in a 50% increase in the average specific methanogenic activity and 23% increase in methane yield of the biochemical methane potential tests after eight months. The results showed that Lystek degradation kinetics were 40% faster than the TWAS, as reflected by first order kinetic coefficients of 0.053 d^?1 and 0.073 d^?1 for TWAS and Lystek at an SRT of 10 days.     

Comparative study of natural radioactivity levels in soil samples from the Upper Siwaliks and Punjab,India using gamma-ray spectrometry

Natural radioactive materials under certain conditions can reach hazardous radiological levels. So, it becomes necessary to study the natural radioactivity levels in soil to assess the dose for the population in order to know the health risks and to have a baseline for future changes in the environmental radioactivity due to human activities. The natural radionuclide (²²⁶Ra, ²³²Th, and ⁴⁰K) contents in soil were determined for 26 locations around the Upper Siwaliks of Kala Amb, Nahan and Morni Hills, Northern India, using high-resolution gamma-ray spectrometric analysis. It was observed that the concentration of natural radionuclides viz., ²²⁶Ra, ²³²Th and ⁴⁰K, in the soil varies from 28.3 ± 0.5 to 81.0 ± 1.7 Bq kg⁻¹, 61.2 ± 1.3 to 140.3 ± 2.6 Bq kg⁻¹ and 363.4 ± 4.9 to 1002.2 ± 11.2 Bq kg⁻¹ respectively. The total absorbed dose rate calculated from activity concentration of ²²⁶Ra, ²³²Th and ⁴⁰K ranged from 71.1 to 162.0 nGy h⁻¹. The radium equivalent (R_eq) and the external hazard index (H_ex), which resulted from the natural radionuclides in soil, were also calculated and found to vary from 149.4 to 351.8 Bq kg⁻¹and from 0.40 to 0.95 respectively. These values in Upper Siwaliks area were compared with that from the adjoining areas of Punjab. The radium equivalent activities in all the soil samples were lower than the limit (370 Bq kg⁻¹) set in the Organization for Economic Cooperation and Development (OECD) report and the dose equivalent was within the safe limit of 1 mSv y⁻¹.     

Surfactant-induced mobilisation of trace metals from estuarine sediment: implications for contaminant bioaccessibility and remediation

The mobilisation of metals (Al, Fe, Cd, Cu, Mn, Ni, Pb, Sn, Zn) from contaminated estuarine sediment has been examined using commercially available surfactants. Metal release by the anionic surfactant, sodium dodecyl sulphate (SDS), increased with increasing amphiphile concentration up to and above its critical micelle concentration (CMC). Metal mobilisation by the bile acid salt, sodium taurocholate, and the nonionic surfactant, Triton X-100, however, did not vary with amphiphile concentration. SDS was the most efficient surfactant in mobilising metals from the sample, and Cd, Cu and Ni were released to the greatest extents (12-18% of total metal at [SDS] > CMC). Metal mobilisation appeared to proceed via complexation with anionic amphiphiles and denudation of hydrophobic host phases. Surfactants may play an important role in the solubilisation of metals in the digestive environment of deposit-feeding animals and, potentially, in the remediation of metal-contaminated soil and sediment.     

Arsenic tolerances in rice (Oryza sativa) have a predominant role in transcriptional regulation of a set of genes including sulphur assimilation pathway and antioxidant system

World wide arsenic (As) contamination of rice has raised much concern as it is the staple crop for millions. Four most commonly cultivated rice cultivars, Triguna, IR-36, PNR-519 and IET-4786, of the West Bengal region were taken for a hydroponic study to examine the effect of arsenate (As^V) and arsenite (As^III) on growth response, expression of genes and antioxidants vis-à-vis As accumulation. The rice genotypes responded differentially under As^V and As^III stress in terms of gene expression and antioxidant defences. Some of the transporters were up-regulated in all rice cultivars at lower doses of As species, except IET-4786. Phytochelatin synthase, GST and γ-ECS showed considerable variation in their expression pattern in all genotypes, however in IET-4786 they were generally down-regulated in higher As^III stress. Similarly, most of antioxidants such as superoxide dismutase (SOD), ascorbate peroxidase (APX), guaiacol peroxidase (GPX), catalase (CAT), monodehydroascorbate reductase (MDHAR) and dehydroascorbate reductase (DHAR) increased significantly in Triguna, IR-36 and PNR-519 and decreased in IET-4786. Our study suggests that Triguna, IR-36 and PNR-519 are tolerant rice cultivars accumulating higher arsenic; however IET-4786 is susceptible to As-stress and accumulates less arsenic than other cultivars.