Effect of compaction on soil CO2 and CH4 fluxes from tropical peatland in Sarawak,Malaysia

Environment, Development and Sustainability - Tropical peatland stores a large amount of carbon (C) and is an important C sink. In Malaysia, about 25% of the peatland area has been converted to oil...     

Microalgae cultivation for phenolic compounds removal

Microalgae are promising sustainable and renewable sources of oils that can be used for biodiesel production. In addition, they contain important compounds, such as proteins and pigments, which have large applications in the food and pharmaceutical industries. Combining the production of these valuable products with wastewater treatment renders the cultivation of microalgae very attractive and economically feasible. This review paper presents and discusses the current applications of microalgae cultivation for wastewater treatment, particularly for the removal of phenolic compounds. The effects of cultivation conditions on the rate of contaminants removal and biomass productivity, as well as the chemical composition of microalgae cells are also discussed.     

Discriminant analysis for the prediction of sand mass distribution in an urban stormwater holding pond using simulated depth average flow velocity data

The approach of this paper is to predict the sand mass distribution in an urban stormwater holding pond at the Stormwater Management And Road Tunnel (SMART) Control Centre, Malaysia, using simulated depth average floodwater velocity diverted into the holding during storm events. Discriminant analysis (DA) was applied to derive the classification function to spatially distinguish areas of relatively high and low sand mass compositions based on the simulated water velocity variations at corresponding locations of gravimetrically measured sand mass composition of surface sediment samples. Three inflow parameter values, 16, 40 and 80 m³ s^?1, representing diverted floodwater discharge for three storm event conditions were fixed as input parameters of the hydrodynamic model. The sand (grain size?>?0.063 mm) mass composition of the surface sediment measured at 29 sampling locations ranges from 3.7 to 45.5 %. The sampling locations of the surface sediment were spatially clustered into two groups based on the sand mass composition. The sand mass composition of group 1 is relatively lower (3.69 to 12.20 %) compared to group 2 (16.90 to 45.55 %). Two Fisher’s linear discriminant functions, F ₁ and F ₂, were generated to predict areas; both consist of relatively higher and lower sand mass compositions based on the relationship between the simulated flow velocity and the measured surface sand composition at corresponding sampling locations. F ₁?=??9.405?+?4232.119?×?A???1795.805?×?B?+?281.224?×?C, and F ₂?=??2.842?+?2725.137?×?A???1307.688?×?B?+?231.353?×?C. A, B and C represent the simulated flow velocity generated by inflow parameter values of 16, 40 and 80 m³ s^?1, respectively. The model correctly predicts 88.9 and 100.0 % of sampling locations consisting of relatively high and low sand mass percentages, respectively, with the cross-validated classification showing that, overall, 82.8 % are correctly classified. The model predicts that 31.4 % of the model domain areas consist of high-sand mass composition areas and the remaining 68.6 % comprise low-sand mass composition areas.     

Development of statistical models for predicting muscle and mental activities during repetitive precision tasks

This study was conducted to develop muscle and mental activities on repetitive precision tasks. A laboratory experiment was used to address the objectives. Surface electromyography was used to measure muscle activities from eight upper limb muscles, while electroencephalography recorded mental activities from six channels. Fourteen university students participated in the study. The results show that muscle and mental activities increase for all tasks, indicating the occurrence of muscle and mental fatigue. A linear relationship between muscle activity, mental activity and time was found while subjects were performing the task. Thus, models were developed using those variables. The models were found valid after validation using other students’ and workers’ data. Findings from this study can contribute as a reference for future studies investigating muscle and mental activity and can be applied in industry as guidelines to manage muscle and mental fatigue, especially to manage job schedules and rotation.     

Using biomass residues from oil palm industry as a raw material for pulp and paper industry: potential benefits and threat to the environment

Oil palm industries produce an enormous quantity of lignocellulosic biomass; in the form of large leaves of palm tree, pruned fronds (OPF) and oil palm trunks (OPT) at the plantations site. Besides this, the processing of fresh fruit bunches in the oil mills generates empty fruit bunches (EFB), shells, kernel cake and mesocarp fibers. The proper management of this burgeoning waste and its disposal is an ardent task and creates environmental hazards. In order to deal with the biomass residues, the urgent need is that it should be transformed into resources with industrial utility. As the economic development has resulted in the significant increased demand for paper, the industry is looking for eccentric sources to fulfill the requirement. The pulp and paper industry preferred use of coniferous and deciduous trees for papermaking because their cellulose fibers in the pulp make durable paper. With improvements in pulp processing technology, fibers of almost any non-wood of plants species like bamboo, cereal straw, sugarcane, flax, hemp and jute can be used for paper pulp. Substituting this lignocellulosic material can reduce the burden on forest while supporting the natural biodiversity. The present review deals with the possibilities of using oil palm biomass as a raw material for pulp and papermaking, as this would ameliorate its waste management problem. The potential of oil palm biomass and the challenges regarding its use in papermaking are discussed. The use of oil palm biomass will apparently prove that the oil palm industry is ecofriendly in every aspect of its activities and aid in sustainability of forest ecosystem.     

A comparative study of the toxicity of lead and its impact on the carbohydrate metabolism and some haematological parameters of cichlid fish,oreochromis niloticus and catfish,clarius gariepinus from saudi arabia

Fresh and healthy specimens of Oreochromis niloticus (mean weight 70.5± 1.23 g and mean length, 12.3± 1.5cm) and Clarias gariepinus (mean weight, 41.8±2.3 g and mean length 13.78 ± 1.2 cm) were exposed to heavy metal lead, ranging in concentration from 10 to 18 mg L^‐1 for O. niloticus and 20 to 28 mg L^‐1 for C. gariepinus respectively. The 96 h LC₅₀ for both the species was computed as 12.45 mg L^‐1 (O. niloticus) and 22.65 mg L^‐1 (C. gariepinus). The cichlid fish was exposed to sublethal concentration of lead (2, 4 and 6 mgL^‐1) and catfish (4, 8 and 12 mgL^‐1). The erythrocytes count, haemoglobin concentration, haematocrit and the value of serum glucose increased significantly (P < 0.01), whereas leucocytes count, serum protein and serum triglyceride after intoxication declined in both the species with the same pattern but in different quantity. After 96 h of time a significant depletion of muscle and liver glycogen was noted, being greater in muscle (16.7% in O. niloticus) and in liver (15.9% in C. gariepinus). The response of fish to lead was dose dependent.     

On–off control of aeration time in the simultaneous removal of ammonia and manganese using a biological aerated filter system

The biological aerated filter (BAF) system, a new alternative in drinking water treatment, was designed to remove NH₄⁺–N and Mn²⁺ simultaneously. This study aimed to control the aeration time in the BAF system for simultaneous NH₄⁺–N and Mn²⁺ removal to achieve the Malaysian effluent quality regulation for drinking water. The experiment was conducted under four strategies of S1, S2, S3 and S4. The results demonstrated that acceptable levels of NH₄⁺–N and Mn²⁺ were achieved over a 6 h aeration period (S1), producing effluent concentrations of 0.7 mg/L (93.2% removal) and 0.08 mg/L (79.6% removal), respectively. At the initial treatment of S1 and S2, the dissolved oxygen (DO) level rapidly increased until it reached a saturated concentration (6.8 mg/L DO) after 2 h period. Automatic on–off aeration time to maintain 3 mg/L DO set point (S4) resulted with a good effluent quality of NH₄⁺–N and Mn²⁺ compared with the 2 mg/L DO set point (S3) which did not meet the regulated standard limits. Through the automatic on–off aeration time, the saturated and excessive DO levels in the BAF system can be avoided consequently reduce the wastage of energy and electrical consumption for simultaneous NH₄⁺–N and Mn²⁺ removal from drinking water treatment.     

Biosafety Act 2007: Does It Really Protect Bioethical Issues Relating To GMOS

Despite the (serious) global concerns about the safety and genetic stability of genetically modified organisms, the Malaysian National Biosafety Board (NBB) has recently approved the field testing for genetically modified (GM) male mosquitoes. With this development, bioethical issues, which in some respect could adversely impinge on the social, economic and environmental aspects of the society, have surfaced, and these concerns must be addressed by the authorities concerned. In reviewing this application, the National Biosafety Board has followed the requirements of the Biosafety Act 2007, which was created to strike a balance between promoting biotechnology and at the same time protecting against its potential environmental and human health risks in Malaysia. However, the 2007 Act fails to adequately take into account any bioethical issues in spite of the inclusion of a provision on socio-economic consideration. As part of an ongoing doctoral research project, and by way of an instrumental critique of the 2007 Act, the present paper attempts to address the role and function of the Malaysia biosafety legal framework in governing bioethical concerns relating to Genetically Modified Organisms (GMOs) within the current biotechnology background in Malaysia. Additionally, the paper suggests that the ambiguity of the provisions contained within the 2007 Act in governing such concerns, representing wider societal interests and welfare, in some ways might defeat the balancing role that this act was originally intended to fulfil.     

Evaluation of mentum deformities of Chironomus spp. (Chironomidae: Diptera) larvae using modified toxic score index (MTSI) to assess the environmental stress in Juru River Basin, Penang, Malaysia

Morphological mentum deformities which represent sublethal effect of exposure to different types of pollutants were evaluated in Chironomus spp. larvae inhabiting three polluted rivers of Juru River Basin in northwestern peninsular Malaysia. Using mentum deformity incidences, the modified toxic score index (MTSI) was developed based on Lenat??s toxic score index (TSI). The suggested MTSI was compared with TSI in terms of its effectiveness to identify different pollutants including heavy metals. The MTSI showed stronger relationship to total deformity incidence expressed as percentage. Additionally, the multivariate RDA model showed higher capability of MTSI to explain the variations in heavy metal contents of the river sediments. The MTSI was recommended in bioassessment of water and sediment quality using the mentum deformities of Chironomus spp. larvae from aquatic ecosystems receiving anthropogenic, agricultural, or industrial discharges.