Assessing land use impacts on flood processes in complex terrain by using GIS and modeling approach

A distributed hydrologic modeling and GIS approach is applied for the assessment of land use impact in the Steinsel sub-basin, Alzette, Grand-Duchy of Luxembourg. The assessment focuses on the runoff contributions from different land use classes and the potential impact of land use changes on runoff generation. The results show that the direct runoff from urban areas is dominant for a flood event compared with runoff from other land use areas in this catchment, and tends to increase for small floods and for the dry season floods, whereas the interflow from forested, pasture and agricultural field areas contributes to the recession flow. Significant variations in flood volume, peak discharge, time to the peak, etc., are found from the model simulation based on the three hypothetical land use change scenarios.     

Application of a checklist for quality assistance in environmental modelling to an energy model

Large, complex energy models present considerable challenges to develop and test. Uncertainty assessments of such models provide only partial guidance on the quality of the results. We have developed a model quality assistance checklist to aid in this purpose. The model checklist provides diagnostic output in the form of a set of pitfalls for the model application. The checklist is applied here to an energy model for the problem of assessing energy use and greenhouse gas emissions. Use of the checklist suggests that results on this issue are contingent on a number of assumptions that are highly value-laden. When these assumptions are held fixed, the model is deemed capable of producing moderately robust results of relevance to climate policy over the longer term. Checklist responses also indicate that a number of details critical to policy choices or outcomes on this issue are not captured in the model, and model results should therefore be supplemented with alternative analyses.     

多介质环境目标值的应用

本文概述了多介质目标德的SAM/Ⅰ的方法。多介质目标值包括环境目标值和排放目标值。点源分析包括SAM/ⅠA,SAM/ⅠB,SAM/Ⅰ,SAM/Ⅱ。在缺少环境质量标准的情况下,使用多介质环境目标值有较强的适用性,且具有省时、省力、经济等特点。本文将多介质目标值的SAM/ⅠA点源分析方法引入聚氯乙烯生产废水的环境评价中,取得较为满意的结果。     

Determination of arsenic in grain and soil by hydride nondispersive atomic fluorescence method

Quantity of trace arsenic in grain and soil was determined by hydride nondispersive atomic fluorescence method.Optimum conditions of measurement were selected in the experiment including the pH of the medium, reductive agent, the concentration and flowing velocity of KBH4, rate of carrier gas and atomized temperature. The reference sample of rice C was determined and the linear relationship of the calibration curve was plotted, indicating that the method was highly precise. In the experiment of recovery rate, the method was quite satisfactory.Based on the determination of hundreds of samples, it is proved that atomic fluorescence method is rapid, sensitive and low in interference. It is very efficient on determination of trace arsenic in soils and grains, especially in grains.     

天津地区大气污染状况和气溶胶硫酸盐的研究

我们于1980—1981年对天津市大气污染物浓度做了同步监测,对天津市大气污染状况,二氧化硫转化为硫酸盐的过程及其对大气能见度的影响做了研究。以超C_i几率和的方法处理数据,研究结果表明,大气污染以早晨最严重,傍晚次之,中午较轻:冬季比夏季污染严重。各种污染物中以硫酸盐对大气能见度的影响最大,总颗粒物次之。当大气相对湿度大于70%时,对大气能见度的影响比较突出。颗粒物中的苯溶物对大气能见度有一定的影响。城市中相对湿度高时硫酸盐浓度大,可能是产生冬季烟雾事件的原因。下风方向的硫酸根浓度与二氧化硫浓度的比值和硫酸根含硫浓度与大气总硫浓度的比值均比上风方向相应的数值高,说明城市燃煤烟气是硫酸盐的来源。城市中硫酸根浓度与二氧化硫浓度的相关系数为0.77,硫酸根与颗粒物浓度的相关系数为0.95。在形成硫酸根的过程中二氧化硫浓度和颗粒物可能有贡献。以一维有源简化模式估算二氧化硫转化为硫酸根的速率常数,约为2.3±1.1%/hr,冬季约1.5%/hr。二氧化硫的迁移距离约为17—340km。     

Technological system for sustainable development of Chinese agriculture

ＴｅｃｈｎｏｌｏｇｉｃａｌｓｙｓｔｅｍｆｏｒｓｕｓｔａｉｎａｂｌｅｄｅｖｅｌｏｐｍｅｎｔｏｆＣｈｉｎｅｓｅａｇｒｉｃｕｌｔｕｒｅＺｈａｎｇＲｅｎｗｕ；ＪｉＷｅｎｙｉｎｇ；ＺｈａｎｇＴｏｎｇ（Ａｇｒｏ－ＥｎｖｉｒｏｎｍｅｎｔａｌＰｒｏｔｅｃｔｉｏｎＩｎ...     

螯合纤维的合成及其吸附重金属离子的研究

研究了含有胺肟基和胺腙基功能纤维的合成、结构表征和螯合性能。新型合纤维对多种重金属离子具有良好的吸附性能，能从被污染的水体和土壤中去除重金属离子，经洗脱后可回收金属，螯合纤维能反复使用。     

层控矿床的成岩成矿

本文从成岩分异,成岩交代,自生、脱水、泄水、压实、挤压、扩散和胶结作用等方面,论述层控矿床的成岩成矿作用。     

中国旅游资源分区的初步研究

本文是在8000个旅游资源实体数据的基础上,对旅游资源的区域特征和旅游环境的区域差异性进行定性和定量分析。形成了一个三级分区体系并得到一张中国旅游资源分区图。第一级区,有八个资源区。第二级区,有41个资源区。在每个二级区内有或多或少的三级区,然而,每个三级区必须是根据旅游资源数量、质量和交通条件得出的五类三级区中的某一类。分区程序采用从低级区向高级区归并的方式。本结果对管理旅游资源和发展中国旅游业有重要参考价值。     

A Simulation of Temporal and Spatial Variations in Carbon at Landscape Level: A Case Study for Lake Abitibi Model Forest in Ontario,Canada

Using a case study of the Lake Abitibi Model Forest (LAMF), this study aims to assess the temporal and spatial variability in carbon storage during 1990–2000, and to present a comprehensive estimation of the carbon budget for LAMF's ecosystems. As well, it provided the information needed by local forest managers to develop ecological and carbon-based indicators and monitor the sustainability of forest ecosystems. Temporal and spatial carbon dynamics were simulated at the landscape level using ecosystem model TRIPLEX1.0 and Geographical Information System (GIS). The simulated net primary productivity (NPP) and carbon storage in forest biomass and soil were compared with field data and results from other studies for Canada's boreal forests. The results show that simulated NPP ranged from 3.26 to 3.34 tC ha⁻¹ yr⁻¹ in the 1990s and was consistent with the range measured during the Boreal Ecosystem-Atmosphere Studies (BOREAS) in central Canada. Modeled NPP was also compared with the estimation from remote sensing data. The density of total above-and belowground biomass was 125.3, 111.8, and 106.5 tC ha⁻¹ for black spruce, trembling aspen, and jack pine in the LAMF ecosystem, respectively. The total carbon density of forested land was estimated at 154.4 tC ha⁻¹ with the proportion of 4:6 for total biomass and soil. The analysis of net carbon balance of ecosystem suggested that the LAMF forest ecosystem was acting as a carbon sink with an allowable harvest in the 1990s.