Development of a test method against hot alkaline chemical splashes.

High temperature alkaline chemical liquids have caused injuries and hazardous situations in Finnish pulp manufacturing mills. There are no requirements and/or test method standards concerning protection against high temperature alkaline chemical splashes. This paper describes the test method development process to test and identify materials appropriate for hot liquid chemical hazard protection. In the first phase, the liquid was spilled through a stainless steel funnel and the protection performance was evaluated using a polyvinyl chloride (PVC) film under the test material. After several tentative improvements, a graphite crucible was used for heating and spilling the chemical, and a copper-coated K-type thermometer with 4 independent measuring areas was designed to measure the temperature under the material samples. The thermometer was designed to respond quickly so that peak temperatures could be measured. The main problem was to keep the spilled amount of chemical constant, which unfortunately resulted in significant variability in data.     

Occurrence of phenols in leachates from municipal solid waste landfill sites in Japan

The concentrations of 41 phenols in leachates from 38 municipal solid waste (MSW) landfill sites in Japan were measured. The main phenols detected in leachates were phenol, three cresols, 4-tert-butylphenol, 4-tertoctylphenol, 4-nonylphenol, bisphenol A, and some chlorophenols. The concentration levels of phenols were affected by the pH values of the leachates and the different types of landfill waste. The origins of phenol and p-cresol were considered to be incineration residues, and the major origin of 4-tert-butylphenol, bisphenol A, and 2,4,6-trichlorophenol was considered to be solidified fly ash. In contrast, the major origins of 4-tert-octylphenol and 4-nonylphenol were considered to be incombustibles. The discharge of leachates to the environment around MSW landfill sites without water treatment facilities can cause environmental pollution by phenols. In particular, the disposal of incineration residues including solidified fly ash and the codisposal of solidified fly ash and incombustibles might raise the possibility of environmental pollution. Moreover, the discharge of leachates at pH values of 9.8 or more could pollute the water environment with phenol. However, phenol, 4-nonylphenol, and bisphenol A can be removed to below the con centration levels that impact the environment around landfill sites by a series of conventional water treatment processes.     

类芦对铅的耐性及富集能力探讨

通过野外调查和盆栽试验,研究了类芦(Neyraudia reynaudiana)对Pb的耐性和富集能力.研究结果表明,类芦对Pb耐受的临界浓度为800 mg/kg,在此浓度以下Pb对类芦的生长基本无抑制作用.随着处理浓度的增加,类芦生长变缓慢、出现中毒症状,但仍能存活.从富集能力来看,土壤Pb为中低浓度时,类芦的富集能力较强,但Pb浓度超过1 000 mg/kg后地上部富集量增加缓慢,而根部的含量则降低.在各种Pb处理浓度下,类芦地上部Pb含量均大于根部,说明这种植物对Pb有较好的迁移能力.研究发现,类芦具有较高的生物量,因此其地上部Pb迁移总量较高,在土壤Pb浓度为800 mg/kg时类芦地上部的迁移总量可达到221.77 mg/m2.综合分析可知,类芦对中度Pb污染土壤的植物修复具有较大的潜力.     

林业生物灾害的监测调查技术研究进展

介绍了航天遥感、航空遥感、地面调查等技术在林业生物灾害监测中的应用现状与发展历程,在分析上述三项技术优缺点的基础上,提出了在我国建立树木、林分、景观等尺度综合监测技术体系,开展林业生物灾害监测与调查的方法及相关建议.     

桫椤群落内主要乔木种群的种间联结性

在相邻格子抽样调查的基础上,采用X^2检验、联结系数（Ac)和种间共出现百分率（Pc)等指标,分析了福建省永定桫椤群落内主要乔木种群的种间联结性。结果表明：除少数种对外,绝大多数种群间的联结性不显著,在联结性显著的种对中,下述7个种对之间有较高的正联结性：朴树－野鸦椿、青冈－黄瑞木、青冈－油柿、翻白叶树－拉氏栲、黄瑞木－油柿、 青冈－香叶树和Song木－盐肤木,就桫椤群落而言,桫椤与猴欢喜、水团花之间有一定的正联结,与广东润楠、黄瑞木、柳叶山 茶、朴树和野鸦椿有较紧密的负联结。图3参11     

Improve Compliance with Limited Resources by a Three-Group Inspection Regime

Frequent monitoring and relatively high fines are usually necessary to bring about improvements in environmental quality, but more challenging for many countries with limited human, material, and financial resources is to put them into practice. This paper developed a three-group model of a state-dependent enforcement in a repeated game to improve the policy implementation under limited inspection capacities. A certain number of firms are grouped (group 1, group 2, group 3) for different supervision intensity (e.g., the order of inspection probability corresponding to each group is p ₁?<?p ₂?<?p ₃) based on their environmental performance. The optimal policy parameters, such as inspection probability of each group and the probability that a firm found in compliance is moved to a better reputation group, were obtained as the basis for regulator’s policy making. Numerical simulations indicated that the three-group inspection regime can significantly increase compliance rate as compared with static enforcement with the same monitoring probability. Among the number of firms in each group under steady state conditions, group 2 had the most, group 1 was the second, and group 3 had the smallest. Analysis and prediction of a three-group reputation example provided a good experiment for the model. The results give a practical reference for the policy makers with inspection capacity constraints to achieve higher compliance rate.     

Modeling of Cr contamination in the agricultural lands of three villages near the leather industry in Kasur,Pakistan, using statistical and GIS techniques

Kasur is one of the hubs of leather industry in the Punjab, Pakistan, where chrome tanning method of leather processing is extensively being used. Chromium (Cr) accumulation levels in the irrigation water, soil, and seasonal vegetables were studied in three villages located in the vicinity of wastewater treatment plant and solid waste dumping site operated by the Kasur Tanneries Waste Management Agency (KTWMA). The data was interpreted using analysis of variance (ANOVA), clustering analysis (CA), and principal component analysis (PCA). Interpolated surface maps for Cr were generated using the actual data obtained for the 30 sampling sites in each of the three villages for irrigation water, soil, and seasonal vegetables. The level of contamination in the three villages was directly proportional to their distance from KTWMA wastewater treatment plant and the direction of water runoff. The highest level of Cr contamination in soil (mg kg^?1) was observed at Faqeeria Wala (37.67), intermediate at Dollay Wala (30.33), and the least in Maan (25.16). A gradational variation in Cr accumulation was observed in the three villages from contaminated wastewater having the least contamination level (2.02–4.40 mg L^?1), to soil (25.16–37.67 mg kg^?1), and ultimately in the seasonal vegetable crops (156.67–248.33 mg kg^?1) cultivated in the region, having the highest level of Cr contamination above the permissible limit. The model used not only predicted the current situation of Cr contamination in the three villages but also indicated the trend of magnification of Cr contamination from irrigation water to soil and to the base of the food chain. Among the multiple causes of Cr contamination of vegetables, soil irrigation with contaminated groundwater was observed to be the dominant one.