Influence of microbial community on degradation of flubendiamide in two Indian soils

Degradation of flubendiamide as affected by microbial population count in two Indian soils (red and alluvial) varying in physicochemical properties was studied under sterile and non-sterile conditions. Recovery of flubendiamide in soil was in the range of 94.7–95.9 % at 0.5 and 1.0 μg g^?1, respectively. The DT₅₀ of flubendiamide at the level of 10 μg g^?1 in red soil under sterile and non-sterile conditions was found to be 140.3 and 93.7 days, respectively, and in alluvial soil under sterile and non-sterile condition was 181.1 and 158.4 days, respectively. Residues of flubendiamide dissipated faster in red soil (non-sterile followed by sterile) as compared to alluvial (non-sterile soil followed by sterile soil). A wide difference in half-life of red and alluvial soil under sterile and non-sterile conditions indicated that the variation in physicochemical properties of red and alluvial soil as well as the presence of microbes play a great role for degradation of flubendiamide. The results revealed that slower-degrading alluvial soil possessed microbes with degradative capacity. The degradation rate in this soil was significantly reduced by some of its physicochemical characteristics, despite sterile and non-sterile conditions, which was faster in red soil.     

Heavy metal levels and esterase variations between metal-exposed and unexposed duckweed Lemna minor: field and laboratory studies

Environmental homogeneity is being continuously disturbed and affected by artificially introduced loads of chemical toxicants that also include heavy metals. The Tiljala wetlands of the eastern fringe of Calcutta, West Bengal (India) are a virtual sink for the deposition of urban and industrial wastes that get admixed with the aquatic environment. We have selected Lemna minor (duckweed), as a representative of the biota surviving therein for the present study. Concentrations of lead, cadmium, chromium, zinc, copper and mercury in the fronds of Lemna were measured to peep into the range of input of heavy metals in the duckweed subjects. Natural unexposed population of duckweed from a domestic pond in Batanagar area, 24 Parganas, West Bengal (India) was also found to accumulate similar concentrations of these metals when cultured in artificially contaminated water in the laboratory. The exposed individuals also exhibited polymorphism with respect to the loci of esterase, as compared to an unexposed control plants. Therefore, the present study suggests EST variations of L. minor to be a potential biomarker of heavy metal pollution.     

Biocatalyst physiology and interplay: a protagonist of MFC operation

Environmental Science and Pollution Research - Microbial fuel cells (MFC) have been foreseen as a sustainable renewable energy resource to meet future energy demand. In the past, several studies...     

Novel mesoporous microspheres of Al and Ni doped LMO spinels and their performance as cathodes in secondary lithium ion batteries

A facile, scalable, and solution-based technique is used to fabricate Al and Ni-doped (LiAl_0.1Mn_1.9O₄ and LiAl_0.1Ni_0.1Mn_1.8O₄) microspheres of lithium manganese oxide (LMO) spinels for use as reversible cathode materials for lithium ion batteries (LIBs). The spheres of the two samples exhibit different porosities. Cells with these LMO-based cathodes are then cycled between 4.5 V and 2 V to study their stabilities while simultaneously being subjected to the undesirable Jahn-Teller distortion that occurs around the ~3 V regime. The LiAl_0.1Mn_1.9O₄ (LAMO) and the LiAl_0.1Ni_0.1Mn_1.8O₄ (LANMO) cells exhibit comparable open circuit voltages (OCV) of 2.94 V and 2.97 V, respectively. During cell cycling, the LAMO cell exhibits a maximum specific capacity of 122.51 mAh g^?1 with a capacity fade of 65.35% after 75 cycles. The LiAl_0.1Ni_0.1Mn_1.8O₄ (LAMO) sample fares better and exhibits a maximum of 140.49 mAh g^?1 and a capacity drop of 52.59%. Detailed structural studies indicate that Ni doping and the greater degree of porosity of the LANMO sample to be a stabilizing factor. This is further confirmed by cyclic voltammetry (CV) and AC impedance spectra analysis.     

Evaluation of genotoxicity of coal fly ash in Allium cepa root cells by combining comet assay with the Allium test

Fly ash is a by-product of coal-fired electricity generation plants. Its utilization and disposal is of utmost importance. Using onion (Allium cepa) root tip system, the present study was carried out to evaluate the potential toxic and genotoxic effects of fly ash, collected from a thermal power plant in West Bengal, India. Prior to testing, the collected fly ash sample was mixed with sand in different proportions. Allium bulbs were allowed to germinate directly in fly ash and after five days the germinating roots were processed for the Allium test. Additionally, the Allium test was adapted for detecting DNA damage through comet assay. The results from the Allium test indicate that fly ash at 100% concentration inhibits root growth and mitotic indices; induces binucleated cells as a function of the proportion, but is not toxic at very low concentration. In the comet assay, a statistical increase for DNA strand breaks was found only at higher concentrations. The sample was analyzed by flame atomic absorption spectrometer for Zn, Pb, Cu, Ni, Cd and As, whose presence could partly be responsible for the toxicity of fly ash. The study concludes that the classical Allium test can give a more comprehensive data when done in combination with the comet assay, which is faster, simpler and independent of mitosis. Also when fly ash is used for other purposes in combination with soils, it should be judiciously used at very low concentrations in order to protect the ecosystem health from any potential adverse effects.     

Influence and persistence of phorate and carbofuran insecticides on microorganisms in rice field

An experiment was conducted in microplots (4 m x 4 m) with two insecticides, phorate and carbofuran at rates of 1.5 and 1.0 kga.i.ha(-1) respectively, to investigate its effect on the population and distribution of bacteria, actinomycetes and fungi as well as the persistence of the insecticidal residues in rhizosphere soils of rice (Oryza sativa L., variety IR-50). Application of the insecticides stimulated the population of bacteria, actinomycetes and fungi in the rhizosphere soils, and the stimulation was more pronounced with phorate as compared to carbofuran. Both the insecticides did not have marked effect on the numbers of Streptomyces and Nocardia in the rhizosphere soils. However, the growth of Bacillus, Escherichia, Flavobacterium, Micromonospora, Penicillium, Aspergillus and Trichoderma with phorate and that of Bacillus, Corynebacterium, Flavobacterium, Aspergillus and Phytophthora with carbofuran were increased. On the other hand, the numbers of Staphylococcus, Micrococcus, Fusarium, Humicola and Rhizopus under phorate and Pseudomonas, Staphylococcus, Micrococcus, Klebsiella, Fusarium, Humicola and Rhizopus under carbofuran were inhibited. Both the insecticides persisted in the rhizosphere soil for a short period of time and the rate of dissipation of carbofuran was higher than that of phorate in the soil depicting the half-life (T1/2) 9.1 and 10.4 days, respectively.     

Role of Alternative Electron Acceptors (AEA) to control methane flux from waterlogged paddy fields: Case studies in the southern part of West Bengal, India

The rice fields, depleted of O₂, contain large amount of moisture and organic substrates to provide an ideal anaerobic environment for methanogenesis and are one of the principal anthropogenic sources of methane. In order to mitigate this emission Alternative Electron Acceptors (AEA) were altered in the soil. The experiments were carried out in four seasons at the site of Balarampur, near Baruipur, South 24 Parganas, West Bengal, namely September–December, 2005 (Cultivar: Sundari), February–May, 2006 (Cultivar: Sundari), September–December, 2006 and February–May, 2007 (Cultivar: Swarna-Pankaj). The seasonal average methane flux (Fe treated), for the cultivar type “Sundari” (season: September–December, 2005), is 4.41 t ha⁻¹, as compared to the value of 6.40 t ha⁻¹ for the untreated soil. Similarly for February–May, 2006, the seasonal average methane flux (Fe treated) is 5.52 t ha⁻¹, whereas the untreated flux is 5.69 t ha⁻¹. In the third and fourth seasons we had two treatments with Ammonium Thiosulphate and Ferric Hydroxide. The seasonal average methane flux (treatment: Ammonium Thiosulphate) is 4.35 t ha⁻¹ and 5.41 t ha⁻¹ respectively, whereas for the ferric hydroxide treated soil it is 4.35 t ha⁻¹ and 6.14 t ha⁻¹ respectively. The properties related to the nutrient quality of the harvested paddy seeds supplement these results.     

Information Management System for Site Remediation Efforts

/ Environmental regulatory agencies are responsible for protecting human health and the environment in their constituencies. Their responsibilities include the identification, evaluation, and cleanup of contaminated sites. Leaking underground storage tanks (USTs) constitute a major source of subsurface and groundwater contamination. A significant portion of a regulatory body's efforts may be directed toward the management of UST-contaminated sites. In order to manage remedial sites effectively, vast quantities of information must be maintained, including analytical dataon chemical contaminants, remedial design features, and performance details. Currently, most regulatory agencies maintain such information manually. This makes it difficult to manage the data effectively. Some agencies have introduced automated record-keeping systems. However, the ad hoc approach in these endeavors makes it difficult to efficiently analyze, disseminate, and utilize the data. This paper identifies the information requirements for UST-contaminated site management at the Waste Cleanup Section of the Department of Environmental Resources Management in Dade County, Florida. It presents a viable design for an information management system to meet these requirements. The proposed solution is based on a back-end relational database management system with relevant tools for sophisticated data analysis and data mining. The database is designed with all tables in the third normal form to ensure data integrity, flexible access, and efficient query processing. In addition to all standard reports required by the agency, the system provides answers to ad hoc queries that are typically difficult to answer under the existing system. The database also serves as a repository of information for a decision support system to aid engineering design and risk analysis. The system may be integrated with a geographic information system for effective presentation and dissemination of spatial data.