Particulate nitrate measurement using nylon filters

Nylon filters are a popular medium to collect atmospheric fine particles in different aerosol monitoring networks, including those operated by the U.S. Environmental Protection Agency and the Interagency Monitoring of Protected Visual Environments (IMPROVE) program. Extraction of the filters by deionized water or by a basic aqueous solution (typically a mixture of sodium carbonate and sodium bicarbonate) is often performed to permit measurement of the inorganic ion content of the collected particles. Whereas previous studies have demonstrated the importance of using a basic solution to efficiently extract gaseous nitric acid collected using nylon filters, there has been a recent movement to the use of deionized water for extraction of particles collected on nylon filters to eliminate interference from sodium ion (Na+) during ion chromatographic analysis of inorganic aerosol cations. Results are reported here from a study designed to investigate the efficiency of deionized water extraction of aerosol nitrate (NO3-) and sulfate from nylon filters. Data were obtained through the conduct of five field experiments at selected IMPROVE sites. Results indicate that the nylon filters provide superior retention of collected fine particle NO3-, relative to Teflon filters, and that deionized water extraction (with ultrasonication) of collected NO3- and sulfate is as efficient, for the situations studied, as extraction using a basic solution of 1.7 mM sodium bicarbonate and 1.8 mM sodium carbonate.     

Sorption of 2,4-dinitroanisole (DNAN) on lignin

The present study describes the use of two commercially available lignins, namely, alkali and organosolv lignin, for the removal of 2,4-dinitroanisole (DNAN), a chemical widely used by the military and the dye industry, from water. Sorption of DNAN on both lignins reached equilibrium within 10 hr and followed pseudo second-order kinetics with sorption being faster with alkali than with organosolv lignin, i.e. k₂ 10.3 and 0.3 g/(mg hr), respectively. In a separate study we investigated sorption of DNAN between 10 and 40°C and found that the removal of DNAN by organosolv lignin increased from 0.8 to 7.5 mg/g but reduced slightly from 8.5 to 7.6 mg/g in the case of alkali lignin. Sorption isotherms for either alkali or organosolv lignin best fitted Freundlich equation with enthalpy of formation, ΔH⁰ equaled to 14 or 80 kJ/mol. To help understand DNAN sorption mechanisms we characterized the two lignins by elemental analysis, BET nitrogen adsorption-desorption and ³¹P NMR. Variations in elemental compositions between the two lignins indicated that alkali lignin should have more sites (O- and S-containing functionalities) for H-bonding. The BET surface area and calculated total pore volume of alkali lignin were almost 10 times greater than that of organosolv lignin suggesting that alkali lignin should provide more sites for sorption. ³¹P NMR showed that organosolv lignin contains more phenolic -OH groups than alkali lignin, i.e., 70% and 45%, respectively. The variations in the type of OH groups between the two lignins might have affected the strength of H-bonding between DNAN and the type of lignin used.     

Biphasic production of hydrogen and methane from waste lactose in cyclic-batch reactors

The biphasic production of the energy gases hydrogen and methane was possible in a fed batch culture resulting in a volumetric mix of approximately 20% H₂ and 80% CH₄ and an energy conversion efficiency of 95%, based on the measured Chemical Oxygen Demand and theoretical calculations assuming that the substrate (a dairy waste permeate) was lactose. Gas production showed a rapid initial phase over 0–20 h in which the composition was up to 50% hydrogen with the balance mainly carbon dioxide. This was accompanied by the accumulation of volatile fatty acids (VFA) in which butyric was predominant. A slower second phase of gas production produced a mixture of methane and carbon dioxide with a reduction in the accumulated acids. The duration of this second phase depended on the initial load applied to the reactor, and in the experiments carried out lasted between 6 and 12 days. Where the applied initial load led to an acid accumulation such that the pH fell below 5.5, the second phase of gas production was inhibited. Where pH control was exerted to prevent the pH dropping below 6.5, ethanol accumulated alongside VFA as a first phase product, with the gas comprised entirely of carbon dioxide. Despite the excellent energy conversion and the production of biogas fuel elements matching those for hythane (a mixture of hydrogen and methane, with improved combustion characteristics), the overall process loading was considered too low for efficient volumetric conversion of the feedstock to energy. The concept could be further developed based on high rate reactor systems with granular or immobilised biomass either as a single tank biphasic system or in a split tank two phase production process.     

Experimental evaluation of eco-friendly flocculants prepared from date palm rachis

Sodium carboxymethylcellulose (CMCNa) is an anionic water soluble polyelectrolyte widely used in many industrial sectors including food, textiles, papers, adhesives, paints, pharmaceuticals, cosmetics and mineral processing. CMCNa was produced by chemical modification of cellulose, and represents many advantages: natural, renewable, non-toxic and biodegradable. In this study, di erent kinds of CMCNa, prepared from an agricultural waste date palm rachis, were tested as eco-friendly flocculants for drinking water treatment and their performances as flocculants in turbidity removal enhancement were assessed. The prepared materials were characterized by the degree of substitution (DS) and polymerisation (DP). The study of the e ect of some experimental parameters on the coagulation-flocculation performance, using the prepared materials combined with aluminium sulphate (as coagulant), showed that the best conditions for turbidity treatment were given for pH 8, coagulant dose 20 mg/L, flocculant concentration of 100 mg/L and stirring velocity (during the flocculation step) of 30 r/min. Under the optimum conditions, the turbidity removal using CMCNa, prepared from raw material, was about 95%. A comparison study between the flocculation performance of a commercial anionic flocculant (A100PWG: polyacrylamide) and that of the prepared CMCNa showed that the performance of the waste-based flocculant with a DS of 1.17 and a DP of 480 was 10% better than that achieved by the commercial one.     

Love thy neighbour? Social nesting pattern,host mass and nest size affect ectoparasite intensity in Darwin’s tree finches

Social nesting behaviour is commonly associated with high prevalence and intensity of parasites in intraspecific comparisons. Little is known about the effects of interspecific host breeding density for parasite intensity in generalist host–parasite systems. Darwin’s small tree finch (Camarhynchus parvulus) on Santa Cruz Island, Galápagos Islands, nests in both heterospecific aggregations and at solitary sites. All Darwin finch species on Santa Cruz Island are infested with larvae of the invasive blood-sucking fly Philornis downsi. In this study, we test the prediction that total P. downsi intensity (the number of parasites per nest) is higher for nests in heterospecific aggregations than at solitary nests. We also examine variation in P. downsi intensity in relation to three predictor variables: (1) nest size, (2) nest bottom thickness and (3) host adult body mass, both within and across finch species. The results show that (1) total P. downsi intensity was significantly higher for small tree finch nests with many close neighbours; (2) finches with increased adult body mass built larger nests (inter- and intraspecific comparison); (3) parasite intensity increased significantly with nest size across species and in the small tree finch alone; and (4) nest bottom thickness did not vary with nest size or parasite intensity. These results provide evidence for an interaction between social nesting behaviour, nest characteristics and host mass that influences the distribution and potential impact of mobile ectoparasites in birds.     

Towards adaptation of agriculture to climate change in the Mediterranean

This study links climate change impacts to the development of adaptation strategies for agriculture on the Mediterranean region. Climate change is expected to intensify the existing risks, particularly in regions with current water scarcity, and create new opportunities for improving land and water management. These risks and opportunities are characterised and interpreted across Mediterranean areas by analysing water scarcity pressures and potential impacts on crop productivity over the next decades. The need to respond to these risks and opportunities is addressed by evaluating an adaptive capacity index that represents the ability of Mediterranean agriculture to respond to climate change. We propose an adaptive capacity index with three major components that characterise the economic capacity, human and civic resources, and agricultural innovation. These results aim to assist stakeholders as they take up the adaptation challenge and develop measures to reduce the vulnerability of the sector to climate change.     

Evaluation of the Design Features of Interactive Sea-Level Rise Viewers for Risk Communication

Interactive sea-level rise viewers (ISLRVs) are digital tools used to communicate about impacts of sea-level rise (SLR) and support decision-making. This study characterizes how ISLRVs communicate about SLR-related risks and provide decision-making support. It identifies key themes about fostering accurate mental models of SLR processes, informing about inundation likelihood, communicating about related social and ecological risks, and providing features users can apply to specific tasks. We present a framework for understanding this type of communication tool that designers can use to develop robust ISLRVs that can support audiences’ understanding and decision-making needs, and contribute to enhancement of coastal resiliency.     

Mass balance of pharmaceutical and personal care products in a pilot-scale single-sludge system: influence of T, SRT and recirculation ratio

The influence of operation condition on the fate of 16 pharmaceutical and personal care products (PPCPs) in a single-sludge nitrifying/denitrifying pilot plant was assessed. Volatilisation, sorption and degradation were included in the mass balances to determine the most relevant removal mechanisms during PPCP treatment.Sludge retention time (SRT) was an important factor for the removal of compounds that significantly sorb onto sludge, as ethinylestradiol, whose removal increased 11% when working at SRT above 20 d. The internal recirculation ratio was significant for the removal of moderately biodegradable compounds, as citalopram. The positive effect of operating at warmer temperatures was particularly significant for two antibiotics, implying a 30% increase in their transformations. In the case of naproxen, an influence of sludge acclimation and concentration was observed, leading to removal efficiencies from 27% to 99%.Concerning removal mechanisms, most compounds were removed due to biotransformation, although for fragrances sorption and volatilisation played a role.