The United States Department of Energy's Regional Carbon Sequestration Partnerships Program Validation Phase

This paper reviews the Validation Phase (Phase II) of the Department of Energy's Regional Carbon Sequestration Partnerships initiative. In 2003, the U.S. Department of Energy created a nationwide network of seven Regional Carbon Sequestration Partnerships (RCSP) to help determine and implement the technology, infrastructure, and regulations most appropriate to promote carbon sequestration in different regions of the nation. The objectives of the Characterization Phase (Phase I) were to characterize the geologic and terrestrial opportunities for carbon sequestration; to identify CO(2) point sources within the territories of the individual partnerships; to assess the transportation infrastructure needed for future deployment; to evaluate CO(2) capture technologies for existing and future power plants; and to identify the most promising sequestration opportunities that would need to be validated through a series of field projects. The Characterization Phase was highly successful, with the following achievements: established a national network of companies and professionals working to support sequestration deployment; created regional and national carbon sequestration atlases for the United States and portions of Canada; evaluated available and developing technologies for the capture of CO(2) from point sources; developed an improved understanding of the permitting requirements that future sequestration activities will need to address as well as defined the gap in permitting requirements for large scale deployment of these technologies; created a raised awareness of, and support for, carbon sequestration as a greenhouse gas (GHG) mitigation option, both within industry and among the general public; identified the most promising carbon sequestration opportunities for future field tests; and established protocols for project implementation, accounting, and management. Economic evaluation was started and is continuing and will be a factor in project selection. During the Validation Phase, the seven regional partnerships will put the knowledge learned during the Characterization Phase into practice through field tests that will validate carbon sequestration technologies that are best suited to their respective regions of the country. These tests will verify technologies developed through DOE's core R&D effort and enable implementation of CO(2) sequestration on a large scale, should that become necessary. Pilot projects will have a site-specific focus to test technology; assess formation storage capacity and injectivity; validate and refine existing CO(2) formation models used to determine the transport and fate of CO(2) in the formation; demonstrate the integrity of geologic seals to contain CO(2); validate monitoring, mitigation, and verification (MMV) technologies; define project costs and compare costs of alternatives; assess potential operational and long-term storage risks; address regulatory requirements; and engage and evaluate public acceptance of sequestration technologies. Field validation tests involving both sequestration in geologic formations and terrestrial sequestration are being developed. The results from the Validation Phase will help to confirm the estimates made during the Characterization Phase and will be used to update the regional atlases and NatCarb. Answers to many questions about the effectiveness and safety of carbon sequestration technologies will be instrumental in planning for a Deployment Phase, in which large volume tests will be planned to further sequestration as an option that can mitigate GHG emissions in the United States.     

Comparative Toxicological Evaluation of Untreated and Treated Tannery Effluent with Nostoc Muscorum L. (Algal Assay) and Microtox Bioassay

The relative sensitivity of tannery effluent before and after treatment was compared by employing Nostoc muscorum and microtox assay in laboratory. The effect on chlorophyll, protein and biomass content of Nostoc muscorum was studied with the luminescent property inhibition of Photobacterium phosphorium and compared with algal bioassay. The results of microtox assay after 5, 15 and 30 min of exposure were compared with data obtained from algal bioassay. It was observed that the luminescent property of Photobacterium phosphorium in microtox assay as well as the chlorophyll content of Nostoc muscorum in algal assay were the most sensitive parameters in toxicity evaluation of tannery effluent. The microtox assay produced notably comparable EC50 values with that of algal bioassay. The microtox assay of toxicity showed that EC50 (%) in 30 min was 3.19 and 63.49 for untreated and treated tannery effluent, respectively while in algal bioassay the EC50 for chlorophyll was in between 0-2.5% and 100%, respectively, in untreated and treated effluent. More than 60% reduction of toxicity was noted in treated tannery effluent in both test system.     

Weather variability trends in Gangetic plains of Uttar Pradesh,India: influence on cropping systems and adaptation strategies

Environment, Development and Sustainability - Weather variability over the long run exhibits the trends of change in climate and forewarns for development and deployment of adaptation measures....     

A framework for assessing vulnerability of inland fisheries to impacts of climate variability in India

In recent years climate variability has threatened the sustainability of inland fisheries and dependent fishers in India. Systematic methodology to assess the vulnerability of the fisheries sector to climate variability is currently not available. Towards this end, the present work deals with the assessment of inland fisheries vulnerability to climate variations in 13 districts of West Bengal state in India. For this purpose, a composite vulnerability index (0.0–1.0) has been developed on the basis of functional relationships amongst sensitivity, exposure and adaptive capacity using 19 indicators related to inland fisheries. The data obtained reflected different spatial combinations of climate exposure, sensitivity and adaptive capacity among the districts. Five districts were highly vulnerable which was attributable to low adaptive capacity of the fishers which played an important role in altering the spatial pattern of vulnerability among the districts. Thus our research will provided an important basis for policy makers to develop appropriate adaptation strategies to minimize the risk of fisheries sector to climate variability.     

Nanocellulosic fiber-modified carbon paste electrode for ultra trace determination of Cd (II) and Pb (II) in aqueous solution

In recent years, increasing awareness of the environmental impact of heavy metals has prompted a demand for monitoring and decontaminating industrial wastes prior to discharging into natural water bodies. This paper describes the preparation and electrochemical application of carbon paste electrode modified with nanocellulosic fibers for the determination of cadmium and lead in water samples using anodic stripping voltammetry. First, cadmium and lead were adsorbed on the carbon paste electrode surface at open circuit potential, followed by anodic stripping voltammetric scan from -1 to 0 V. Different factors affecting sensitivity and precision of the electrode, including accumulating solvent, pH of the accumulating solvent, accumulation time, supporting electrolyte, and scan rate were investigated. The proposed method was also applied to the determination of Cd (II) and Pb (II) in the presence of other interfering metal ions and cetyl trimethyl ammonium bromide, sodium dodecyl sulfate, and Triton X-100 as a representative of cationic, anionic, and neutral surfactants. Linear calibration curves were obtained in the concentration ranges of 150–650 μg?L^?1 and 80–300 μg?L^?1, respectively, for cadmium and lead at an accumulated time of 10 min with limits of detection 88 and 33 μg?L^?1. Optimized working conditions are defined as acetate buffer of pH?5 as accumulating solvent, hydrochloric acid as supporting electrolyte, and scan rate 50 mV/s. This technique does not use mercury and therefore has a positive environmental benefit. The method is reasonably sensitive and selective and has been successfully applied to the determination of trace amounts of Cd (II) and Pb (II) in water samples.     

Preliminary Estimates of Performance and Cost of Mercury Control Technology Applications on Electric Utility Boilers

ABSTRACT

Under the Clean Air Act Amendments of 1990, the U.S. Environmental Protection Agency (EPA) determined that regulation of mercury emissions from coal-fired power plants is appropriate and necessary. To aid in this determination, preliminary estimates of the performance and cost of powdered activated carbon (PAC) injection-based mercury control technologies were developed. This paper presents these estimates and develops projections of costs for future applications.

Cost estimates were developed using PAC to achieve a minimum of 80% mercury removal at plants using electrostatic precipitators and a minimum of 90% removal at plants using fabric filters. These estimates ranged from 0.305 to 3.783 mills/kWh. However, the higher costs were associated with a minority of plants using hot-side electrostatic precipitators (HESPs). If these costs are excluded, the estimates range from 0.305 to 1.915 mills/kWh. Cost projections developed using a composite lime-PAC sorbent for mercury removal ranged from 0.183 to 2.270 mills/kWh, with the higher costs being associated with a minority of plants that used HESPs.     

Study of electromagnetic shielding effectiveness of metal oxide polymer composite in their bulk and layered forms

Environmental Science and Pollution Research - In this paper, we present the studies on electromagnetic interference (EMI) shielding effectiveness (SE) of K2CrO4-PMMA composites developed by two...     

Lead detoxification by coontail (Ceratophyllum demersum L.) involves induction of phytochelatins and antioxidant system in response to its accumulation

Coontail (Ceratophyllum demersum L.) plants when exposed to various concentrations of Pb (1-100microM) for 1-7days, exhibited both phytotoxic and tolerance responses. The specific responses were function of concentration and duration. Plants accumulated 1748mugPbg(-1) dw after 7d which reflected its metal accumulation ability, however most of the metal (1222microgg(-1) dw, 70%) was accumulated after 1d exposure only. The toxic effect and oxidative stress caused by Pb were evident by the reduction in biomass and photosynthetic pigments and increase in malondialddehyde (MDA) content and electrical conductivity with increase in metal concentration and exposure duration. Morphological symptoms of senescence phenomena such as chlorosis and fragmentation of leaves were observed after 7d. The metal tolerance and detoxification strategy adopted by the plant was investigated with reference to antioxidant system and synthesis of phytochelatins. Protein and antioxidant enzymes viz., superoxide dismutase (SOD, EC 1.15.1.1), guaiacol peroxidase (GPX, EC 1.11.1.7) ascorbate peroxidase (APX, EC 1.11.1.11), catalase (CAT, EC 1.11.1.6) and glutathione reductase (GR, EC 1.6.4.2) showed induction at lower concentration and duration followed by decline. All enzymes except GPX showed maximum activity after 1d. An increase in cysteine, non-protein thiols (NP-SH) and glutathione (GSH) content was observed at moderate exposure conditions followed by decline. Phytochelatins (PC(2) and PC(3)) were synthesized to significant levels at 10 and 50microM Pb with concomitant decrease in GSH levels. Thus production of PCs seems important for the detoxification of metal, however it may lead to depletion of GSH and consequently oxidative stress. Results suggest that plants responded positively to moderate Pb concentrations and accumulated high amount of metal. Due to metal accumulation coupled with detoxification potential, the plant appears to have potential for its use as phytoremediator species in aquatic environments having moderate pollution of Pb.     

The United States Department of Energy's Regional Carbon Sequestration Partnerships program: a collaborative approach to carbon management

This paper reviews the Regional Carbon Sequestration Partnerships (RCSP) concept, which is a first attempt to bring the U.S. Department of Energy's (DOE) carbon sequestration program activities into the "real world" by using a geographically-disposed-system type approach for the U.S. Each regional partnership is unique and covers a unique section of the U.S. and is tasked with determining how the research and development activities of DOE's carbon sequestration program can best be implemented in their region of the country. Although there is no universal agreement on the cause, it is generally understood that global warming is occurring, and many climate scientists believe that this is due, in part, to the buildup of carbon dioxide (CO(2)) in the atmosphere. This is evident from the finding presented in the National Academy of Science Report to the President on Climate Change which stated "Greenhouse gases are accumulating in Earth's atmosphere as a result of human activities, causing surface air temperatures and subsurface ocean temperatures to rise. Temperatures are, in fact, rising. The changes observed over the last several decades are likely mostly due to human activities, ...". In the United States, emissions of CO(2) originate mainly from the combustion of fossil fuels for energy production, transportation, and other industrial processes. Roughly one third of U.S. anthropogenic CO(2) emissions come from power plants. Reduction of CO(2) emissions through sequestration of carbon either in geologic formations or in terrestrial ecosystems can be part of the solution to the problem of global warming. However, a number of steps must be accomplished before sequestration can become a reality. Cost effective capture and separation technology must be developed, tested, and demonstrated; a database of potential sequestration sites must be established; and techniques must be developed to measure, monitor, and verify the sequestered CO(2). Geographical differences in fossil fuel use, the industries present, and potential sequestration sinks across the United States dictate the use of a regional approach to address the sequestration of CO(2). To accommodate these differences, the DOE has created a nationwide network of seven Regional Carbon Sequestration Partnerships (RCSP) to help determine and implement the carbon sequestration technologies, infrastructure, and regulations most appropriate to promote CO(2) sequestration in different regions of the nation. These partnerships currently represent 40 states, three Indian Nations, four Canadian Provinces, and over 200 organizations, including academic institutions, research institutions, coal companies, utilities, equipment manufacturers, forestry and agricultural representatives, state and local governments, non-governmental organizations, and national laboratories. These partnerships are dedicated to developing the necessary infrastructure and validating the carbon sequestration technologies that have emerged from DOE's core R&D and other programs to mitigate emissions of CO(2), a potent greenhouse gas. The partnerships provide a critical link to DOE's plans for FutureGen, a highly efficient and technologically sophisticated coal-fired power plant that will produce both hydrogen and electricity with near-zero emissions. Though limited to the situation in the U.S., the paper describes for the international scientific community the approach being taken by the U.S. to prepare for carbon sequestration, should that become necessary.