Leaching from solid waste incineration ashes used in cement-treated base layers for pavements

Waste incineration bottom ash and treated flue gas cleaning products mixed with 2.5% of cement (50 kg/m3) were tested in the laboratory in terms of compressive strength and tank leaching tests over a 64-day period. Although the material displayed lower mechanical strength than a reference concrete, the strength still was sufficient for use as a base layer for roads. The metal content in the incineration-residue-based specimens was up to 100 times higher than in the reference concrete, suggesting that the mixed waste incineration residue should be used only for dedicated purposes. The leaching of Cl and Na was increased by a factor of 20-100 from the incineration-residue-based specimens as compared to the reference, while the leaching of K, Ca and SO4 was increased by a factor of 2-10. The leaching of heavy metals was also higher from the incineration-residue-based specimens than from the reference with respect to Cu (50 times), Cd, Pb and Zn (5 times), but not with respect to Cr and Ni. The leaching curves did only allow for a closer evaluation of the leaching process in a few cases. The physical retention of the constituents seemed to be the same in the reference as in the incineration-residue-based specimens. Heavy metal leaching was limited by enhanced chemical retention in the incineration-residue-specimens as compared to the reference. Since no quality criteria in terms of leaching from a monolithic material are currently available, the leaching issue must be evaluated case by case.     

Do birds sleep in flight?

The following review examines the evidence for sleep in flying birds. The daily need to sleep in most animals has led to the common belief that birds, such as the common swift (Apus apus), which spend the night on the wing, sleep in flight. The electroencephalogram (EEG) recordings required to detect sleep in flight have not been performed, however, rendering the evidence for sleep in flight circumstantial. The neurophysiology of sleep and flight suggests that some types of sleep might be compatible with flight. As in mammals, birds exhibit two types of sleep, slow-wave sleep (SWS) and rapid eye-movement (REM) sleep. Whereas, SWS can occur in one or both brain hemispheres at a time, REM sleep only occurs bihemispherically. During unihemispheric SWS, the eye connected to the awake hemisphere remains open, a state that may allow birds to visually navigate during sleep in flight. Bihemispheric SWS may also be possible during flight when constant visual monitoring of the environment is unnecessary. Nevertheless, the reduction in muscle tone that usually accompanies REM sleep makes it unlikely that birds enter this state in flight. Upon landing, birds may need to recover the components of sleep that are incompatible with flight. Periods of undisturbed postflight recovery sleep may be essential for maintaining adaptive brain function during wakefulness. The recent miniaturization of EEG recording devices now makes it possible to measure brain activity in flight. Determining if and how birds sleep in flight will contribute to our understanding of a largely unexplored aspect of avian behavior and may also provide insight into the function of sleep.     

A comparison of contaminant dynamics in arctic and temperate fish: A modeling approach

In order to compare the abilities of arctic and temperate fish to accumulate PCBs we conduct a metabolic analysis to determine how process rates in a mathematical fish contaminant model change with temperature. We evaluate the model by applying the original and adapted models to estimate PCB concentrations in lake trout (Salvelinus namaycush) in Trout Lake, Ontario, Canada, and in arctic char (Salvelinus alphinus) in Lake ?yangen, in the Norwegian high arctic. Modeled concentrations are, for the most part, within 50% of mean measured values and are comparable to the error associated with the fish data. In order to evaluate differences in fish bioaccumulation processes, the model is applied to hypothetical arctic and temperate systems, assuming the same contaminant input values in water and diet. The model predicts that temperate salmonids are able to biomagnify PCBs 6-60% more than arctic salmonids. For all congeners, the lower BMF(MAX) of arctic fish contribute to their lower concentrations. For congeners with log K(ow) < 6.0, the lower concentrations in arctic fish are also attributed to faster loss due to gill ventilation. Faster growth rates for temperate fish reduce the difference in bioaccumulation for congeners with log K(ow) > 7.0. These processes are controlled by the influence of lipid in the fish and their diet as well as the dependence of growth on temperature. We suggest that fish models originally calibrated for temperate systems may be directly applied to arctic lakes after accounting for the lipid content of the fish and their diet as well as water temperature.     

Value for Money: Protecting Endangered Species on Danish Heathland

Biodiversity policies in the European Union (EU) are mainly implemented through the Birds and Habitats Directives as well as the establishment of Natura 2000, a network of protected areas throughout the EU. Considerable resources must be allocated for fulfilling the Directives and the question of optimal allocation is as important as it is difficult. In general, economic evaluations of conservation targets at most consider the costs and seldom the welfare economic benefits. In the present study, we use welfare economic benefit estimates concerning the willingness-to-pay for preserving endangered species and for the aggregate area of heathland preserved in Denmark. Similarly, we obtain estimates of the welfare economic cost of habitat restoration and maintenance. Combining these welfare economic measures with expected species coverage, we are able to estimate the potential welfare economic contribution of a conservation network. We compare three simple nonprobabilistic strategies likely to be used in day-to-day policy implementation: i) a maximum selected area strategy, ii) a hotspot selection strategy, and iii) a minimizing cost strategy, and two more advanced and informed probabilistic strategies: i) a maximum expected coverage strategy and ii) a strategy for maximum expected welfare economic gain. We show that the welfare economic performance of the strategies differ considerably. The comparison between the expected coverage and expected welfare shows that for the case considered, one may identify an optimal protection level above which additional coverage only comes at increasing welfare economic loss.     

Heavy metal content of combustible municipal solid waste in Denmark.

Data on the heavy metal composition of outlets from Danish incinerators was used to estimate the concentration of Zn, Cu, Pb, Cr, Ni, Cd, As and Hg in combustible waste (wet as received) at 14 Danish incinerators, representing about 80% of the waste incinerated in Denmark. Zn (1020 mg kg(-1)), Cu (620 mg kg(-1)) and Pb (370 mg kg(-1)) showed the highest concentration, whereas Hg (0.6 mg kg(-1)) showed the lowest concentration. The variation among the incinerators was in most cases within a factor of two to three, except for Cr that in two cases showed unexplained high concentrations. The fact that the data represent many incinerators and, in several cases, observations from a period of 4 to 5 years provides a good statistical basis for evaluating the content of heavy metals in combustible Danish waste. Such data may be used for identifying incinerators receiving waste with high concentrations of heavy metals suggesting the introduction of source control, or, if repeated in time, the data must also be used for monitoring the impacts of national regulation controlling heavy metals. It is recommended that future investigations consider the use of sample digestion methods that ensure complete digestion in order to use the data for determining the total heavy metal content of waste.     

Long-Term Benthic Macroinvertebrate Community Monitoring to Assess Pollution Abatement Effectiveness

The benthic macroinvertebrate community of East Fork Poplar Creek (EFPC) in East Tennessee was monitored for 18 years to evaluate the effectiveness of a water pollution control program implemented at a major United States (U.S.) Department of Energy facility. Several actions were implemented to reduce and control releases of pollutants into the headwaters of the stream. Four of the most significant actions were implemented during different time periods, which allowed assessment of each action. Macroinvertebrate samples were collected annually in April from three locations in EFPC (EFK24, EFK23, and EFK14) and two nearby reference streams from 1986 through 2003. Significant improvements occurred in the macroinvertebrate community at the headwater sites (EFK24 and EFK23) after implementation of each action, while changes detected 9 km further downstream (EFK14) could not be clearly attributed to any of the actions. Because the stream was impacted at its origin, invertebrate recolonization was primarily limited to aerial immigration, thus, recovery has been slow. As recovery progressed, abundances of small pollution-tolerant taxa (e.g., Orthocladiinae chironomids) decreased and longer lived taxa colonized (e.g., hydropsychid caddisflies, riffle beetles, Baetis). While assessments lasting three to four years may be long enough to detect a response to new pollution controls at highly impacted locations, more time may be needed to understand the full effects. Studies on the effectiveness of pollution controls can be improved if impacted and reference sites are selected to maximize spatial and temporal trending, and if a multidisciplinary approach is used to broadly assess environmental responses (e.g., water quality trends, invertebrate and fish community assessments, toxicity testing, etc.).     

Environmental assessment of different management options for individual waste fractions by means of life-cycle assessment modelling

Several alternatives exist for handling of individual waste fractions, including recycling, incineration and landfilling. From an environmental point of view, the latter is commonly considered as the least desirable option. Many studies based on life-cycle assessment (LCA) highlight the environmental benefits offered by incineration and especially by recycling. However, the landfilling option is often approached unjustly in these studies, maybe disregarding the remarkable technological improvements that landfills have undergone in the last decades in many parts of the world.This study, by means of LCA-modelling, aims at comparing the environmental performance of three major management options (landfilling, recycling and incineration or composting) for a number of individual waste fractions. The landfilling option is here approached comprehensively, accounting for all technical and environmental factors involved, including energy generation from landfill gas and storage of biogenic carbon. Leachate and gas emissions associated to each individual waste fraction have been estimated by means of a mathematical modelling. This approach towards landfilling emissions allows for a more precise quantification of the landfill impacts when comparing management options for selected waste fractions.Results from the life-cycle impact assessment (LCIA) show that the environmental performance estimated for landfilling with energy recovery of the fractions “organics” and “recyclable paper” is comparable with composting (for “organics”) and incineration (for “recyclable paper”). This however requires high degree of control over gas and leachate emissions, high gas collection efficiency and extensive gas utilization at the landfill. For the other waste fractions, recycling and incineration are favourable, although specific emissions of a variety of toxic compounds (VOCs, PAHs, NO_x, heavy metals, etc.) may significantly worsen their environmental performance.     

A combined ecosystem and value chain modeling approach for evaluating societal cost and benefit of fishing

We describe a combined ecological and economic approach aimed at giving more equal emphasis to both disciplines, while being integrated so that design, analysis, data entry and storage, and result capabilities are developed with emphasis on deriving a user-friendly, easily accessible tool. We have thus developed the approach as an integrated module of the freely available Ecopath with Ecosim scientific software; the world's most widely applied ecological modeling tool. We link the trophic ecosystem model to a value-chain approach where we explicitly and in considerable detail keep track of the flow (amounts, revenue, and costs) of fish products from sea through to the end consumer. We also describe the social aspects of the fish production and trade, by evaluating employment and income diagnostics. This is done with emphasis on distribution income while accounting for social aspects of the fishing sector. From a management perspective, one of the interesting aspects of the approach we introduce here, is that it opens for direct evaluation of what impact management interventions, e.g., quota settings, effort regulation, or area closures, may have on the ecosystem, the economy and the social setting, as well as on food availability for the consumer.     

A new design for sampling with adaptive sample plots

Adaptive cluster sampling (ACS) is a sampling technique for sampling rare and geographically clustered populations. Aiming to enhance the practicability of ACS while maintaining some of its major characteristics, an adaptive sample plot design is introduced in this study which facilitates field work compared to “standard” ACS. The plot design is based on a conditional plot expansion: a larger plot (by a pre-defined plot size factor) is installed at a sample point instead of the smaller initial plot if a pre-defined condition is fulfilled. This study provides insight to the statistical performance of the proposed adaptive plot design. A design-unbiased estimator is presented and used on six artificial and one real tree position maps to estimate density (number of objects per ha). The performance in terms of coefficient of variation is compared to the non-adaptive alternative without a conditional expansion of plot size. The adaptive plot design was superior in all cases but the improvement depends on (1) the structure of the sampled population, (2) the plot size factor and (3) the critical value (the minimum number of objects triggering an expansion). For some spatial arrangements the improvement is relatively small. The adaptive design may be particularly attractive for sampling in rare and compactly clustered populations with an appropriately chosen plot size factor.