A Mathematical Model for the Effects of Fertilization on Nitrogen Concentrations in Unsaturated Soil on Blueberry Farms in Southern New Jersey

Nitrogen is commonly known as a food source for crops. However, the nitrogen compounds used in crop fertilizers, most commonly nitrate (NO₃) and ammonium (NH₄), are not widely understood. Blueberry plants do not take up these compounds as efficiently as organic nitrogen so varying amounts of leaching into the soil and groundwater will occur. A biogeochemical model consisting of ordinary and partial differential equations is implemented to computationally predict the concentrations of nitrate and ammonium in unsaturated soil of blueberry plants, specifically in the southern region of New Jersey. The model takes into account the type of soil of the region, the nitrate uptake of the plant, the water content in the roots region, the pressure heads in the soil pores, and the application rates of fertilizers containing nitrate, ammonium, and organic nitrogen. Computational simulations demonstrate that the model accounts for natural processes and, in addition, show that commonly used fertilizer application rates cause unnecessarily high concentrations of both nitrate and ammonium in the unsaturated soil level. Further, simulations show that decreasing nitrate fertilizer applications by 85.7% in annual and 91.8% in bi-annual schedules provides an optimal system for safe reapplication.     

Robust Regression with Data-Dependent Regularization Parameters and Autoregressive Temporal Correlations

We introduce robust procedures for analyzing water quality data collected over time. One challenging task in analyzing such data is how to achieve robustness in presence of outliers while maintaining high estimation efficiency so that we can draw valid conclusions and provide useful advices in water management. The robust approach requires specification of a loss function such as the Huber, Tukey’s bisquare and the exponential loss function, and an associated tuning parameter determining the extent of robustness needed. High robustness is at the cost of efficiency loss in parameter loss. To this end, we propose a data-driven method which leads to more efficient parameter estimation. This data-dependent approach allows us to choose a regularization (tuning) parameter that depends on the proportion of “outliers” in the data so that estimation efficiency is maximized. We illustrate the proposed methods using a study on ammonium nitrogen concentrations from two sites in the Huaihe River in China, where the interest is in quantifying the trend in the most recent years while accounting for possible temporal correlations and “irregular” observations in earlier years.     

Effect of multi-factors interaction on trace lead equilibrium during municipal solid waste incineration

The thermodynamic equilibrium of trace lead during the waste incineration was calculated on the basis of the minimization of the total Gibbs energy. The effect of incineration condition and MSW components on Pb distribution was investigated mainly in the view of the interaction of related elements. In the oxygen-rich condition, incineration temperature affects Pb distribution by the interaction of Cl, Ca and Na. In the fuel-rich condition, incineration temperature affects Pb distribution directly by the thermal transition of PbS(s) to PbCl(g) and the thermal transition of PbCl(g) to Pb(g). Air ratio has significant effect on Pb distribution by the interaction of H, O and Cl. The liberated Cl in oxidizing condition is far less than that in reducing condition. Na has the top priority to bond with Cl, than Ca only at low temperature and H only at high temperature, so the effect of Cl on Pb distribution depends on the content of Na and Ca. S promotes Pb volatilization by the interaction with Na in oxygen-rich and chlorine-poor condition and depresses Pb volatilization by the formation of PbS(s) directly without interaction with other elements in fuel-rich condition.     

Path analysis of factors influencing household solid waste generation: a case study of Xiamen Island,China

Comprehensive study of the factors influencing household solid waste (HSW) generation is crucial and fundamental for exploring the generation mechanism and forecasting future dynamics of HSW. A case study of Xiamen Island, China was employed to reveal the direct and indirect effects of demographic/socioeconomic factors on solid waste generation at the urban household scale. Based on a face-to-face questionnaire and two-stage survey of solid waste generation, a path analysis model was built. Results showed that the proposed path model exhibited good fit indices. Family size and dinning-at-home rate (DR), whose coefficients were ?0.40 and 0.43, respectively, were the two major factors influencing HSW directly. Moreover, family size, education level, employment rate and age structure played different degrees of indirect effects on HSW generation through respective paths, which should not be ignored. In terms of total effects, coefficients of family size, DR and employment rate were ?0.46, 0.43 and ?0.37, respectively, which were three most dominant factors influencing HSW generation. As for waste composition, organic waste was the most representative of HSW dynamics, and was the most sensitive to impact by the factors studied. Quantitative results of this study have important policy implications for sustainable municipal solid waste management.     

Recycling of combined coal-biomass ash from electric power plant waste as a cementitious material: characteristics and improvement

Combined coal-biomass ash has an enormous impact on environmental quality near electric power plants. This paper describes an alternative to disposal in which the ash is used to produce cementitious materials. Ash was obtained from combustion of coal and biomass containing four mass ratios of anthracite, bitumen, rice husks, and eucalyptus bark. The cement-forming properties were systematically characterized including compressive strength development, durability, and expansion in water. The ash samples were ground to increase the specific surface area, and then used to partially replace ASTM Type I Portland cement in mixtures containing 15, 30, or 45 % ash by mass. The water-binder material's (Portland cement with or without combined coal-biomass ash) ratios (w/c) were held constant at 45, 55, or 65 % by mass. Types A, B, and D ash behaved similarly, while the properties of type C ash were slightly different. Increasing the ash fraction in Portland cement mixtures increased the water requirement and resulted in lower compressive strength. Thorough mechanical grinding reduced the porosity and significantly enhanced the material properties.     

Recycling of cathode ray tube panel glasses as aggregates of concrete blocks and clay bricks

While the cathode ray tube (CRT) funnel containing lead could be transported to a smelting facility to recover lead, which could be an available option in domestic, a proper technology to recycle a CRT panel must be developed. Thus, it was suggested that CRT panel glass be used as aggregates of concrete blocks and clay bricks. Samples of blocks and bricks were fabricated with CRT powders and tested to measure their strength and absorption rate to determine their qualities, and environmental soundness was determined by measuring the leaching rate of hazardous metals. For concrete blocks, CRT panel glass powders incorporated as aggregates up to 40 % replacing stone powder was proposed as the proper condition for manufacturing blocks. Around 2 % of CRT panel incorporated into clay brick to substitute Kaoline was suggested to fabricate the best quality of clay brick. Results of leaching test met the criteria with much less concentration of hazardous metals, even lead compound containing in the CRT funnel. To conclude, the use of CRT panel powder after crushing it to the proper size as an aggregate of concrete blocks or clay bricks could be one of the appropriate alternatives to recycle for CRT glass waste being generated drastically in a short term.     

The application and evaluation research of coffee residue ash into mortar

Coffee residue is usually regarded as a kind of agriculture waste; as its quantity increases the treatment of coffee residue will become an environmental problem. This research is innovative in that it derives the possibility of recycle application using coffee residue ash for cement replacement. In this research, coffee residue is burned in an electronic oven to three kinds of coffee residue ash at 500, 600 and 700 °C, and then appropriate apparatus is used to check the chemical and physical properties of these three types of coffee residue ash. After a general comparison, this study selected 500 and 600 °C coffee residue ashes with 2, 3, 5, 10 and 15 % cement replacements to make 5 cm³ cube mortar specimen to test different curing ages’ compressive strength. Through measurement and experiment, this research found that the compressive strength decreased by adding 500 or 600 °C coffee residue ash into the mortar. By considering waste reduction and practice application, this research derives that using the 600 °C coffee residue ash with 10 % replacement is better than others application, such using result also can get valuable efficiencies of financial and CO₂ reduction.     

Heavy metal mobility and potential availability in animal manure: using a sequential extraction procedure

In this study, dairy cow manure, goat manure, and chicken manure were collected from three farms and analyzed to find out the concentration of Cd, Co, Cr, Cu, Mn, Ni, Pb, and Zn. The concentration and potential of mobility and availability of heavy metals were studied in the animal manure samples. BCR Sequential extraction procedure was used to determine the binding forms of the metals. In this study, pseudo total concentrations of Mn and Zn were found out to be predominant in all the types of animal manure samples. According to the results, it was traced that Cr, Cu, and Ni were observed to be at the second highest level while Cd, Co, and Pb were seen at the lowest level in all the manure samples. When extractable amounts of heavy metals are taken into consideration, it is seen that the amount of the mobile fractions of heavy metals except for Cr and Ni are higher in comparison with that of immobile fraction in all the animal manure samples. It was also viewed that Mn, Cd, and Zn are more available in dairy cow manure and chicken manure whereas Cd, Co, and Mn are more available in goat manure.     

Rare earth element recovery potentials from end-of-life hybrid electric vehicle components in 2010–2030

Increasing attention is currently given to the management of end-of-life (EoL) hybrid electric vehicles (HEVs), because approximately two decades have passed since they were first introduced to the market. A HEV would be one of the largest consumers of rare earth elements (REEs), and hence represents the greatest potential for REE recovery in the future. The purpose of this study is to clarify the present and future recovery potential of REEs that are disposed of as EoL HEVs. This study first estimated the numbers of EoL HEVs during fiscal years (FYs) 2010–2030, and then clarified the potential for recovery of REEs from two HEV-specific components—the hybrid transmission and NiMH battery unit. The results suggest that 0.51–0.65 million HEVs will reach the EoL stage in FY2030, compared with only 11,000 HEVs in FY2010. As of FY2030, REE recovery potentials will increase to 220 tons and 2900 tons for EoL hybrid transmission and NiMH battery units, respectively. A total of 49,000 tons of REEs will be contained within HEV-specific components of HEVs still in use. Moreover, the potential for recovery of REEs from EoL hybrid transmissions and NiMH battery units is estimated to equal 35.4 and 92.1 % of respective demand.     

Carbon dioxide utilization with carbonation using industrial waste-desulfurization gypsum and waste concrete

In this study, we propose a process making calcium carbonate and calcium sulfate and recovering absorbent using ammonia absorbent, carbon dioxide, and industrial waste. The main objective of this study is to confirm the possibility of carbon capture and utilization based on waste materials. We assumed desulfurization gypsum and construction waste (ready mixed concrete washing water, waste concrete, etc.) are CaSO₄, Ca(OH)₂, respectively. And concentration of simulated carbon dioxide gas was 15 vol% similar to flue gas. Calcium carbonate was produced by combination reaction between ionic CO₂ in absorbent and metal ion in the solid waste. Experiments were conducted at normal temperature and pressure. Furthermore, the generated products were characterized by X-ray diffraction, and scanning electron microscope.