Internal eutrophication: How it works and what to do about it—a review

In the 1980s and 1990s, it became increasingly clear that changes in external nutrient loads alone could not entirely explain the severe eutrophication of surface waters in the Netherlands. Nowadays, 'internal eutrophication' has become a widely accepted term in Dutch water management practice to describe the eutrophication of an ecosystem without additional external input of nutrients (N, P, K). This review surveys the principal mechanisms involved in this process. It also discusses possible remedies to combat internal eutrophication.     

The Role of Organic Matter in Natural Aquatic Systems: Analytical Constraints

The dissolved organic matter in aquatic systems consists of a heterogeneous mixture of compounds with wide ranging chemical properties and diverse origins. the presence of organic matter (OM) in surface and ground waters has important implications with regard to the mobility and therefore fate of many potential organic and inorganic pollutants. the majority of the analytical approaches in current use require exhaustive pre-treatment steps which may lead to the formation of artefacts within the sample. an analytical technique based upon gel permeation chromatography is proposed as a more reliable procedure for the characterisation of naturally occurring dissolved organic matter.     

Nachhaltige Entwicklung von Managementstrategien: Multikriterielle Bewertungs- und Entscheidungshilfe-Instrumente im Umweltbereich

Zur Unterstützung von Bewertungs- und Entscheidungsprozessen über die Nachhaltigkeit von Managementstrategien, deren Auswirkungen durch unterschiedlich dimensionierte Indikatoren gemessen werden, gibt es verschiedene mathematische Methoden. In diesem Beitrag werden die Prinzipien dieser sog. multikriteriellen Bewertungs- und Entscheidungshilfeinstrumente beispielhaft anhand einer Auswahl von Strategien für ein Nachhaltiges Wassermanagement vorgestellt, sowie Vor- und Nachteile herausgearbeitet. Es wird gezeigt, dass sich die Verfahren insbesondere in Transparenz, Objektivit?t und durch den Grad an Partizipation durch Akteure z.T. erheblich unterscheiden. W?hrend die Hassediagrammtechnik sich an den naturwissenschaftlich begründbaren Datenmatrix orientiert und somit eine objektive und transparente Bewertung und Datenanalyse liefert, haben Konkordanzanalyse, Nutzwertanalyse, PROMETHEE und AHP ihre St?rken in der M?glichkeit, Akteure bzw. Stakeholder am Entscheidungsprozess partizipieren zu lassen. *** DIRECT SUPPORT *** A00OI029 00003     

Optimality of parental investment: The influence of nursing on reproductive success of mother and female young house mice

Summary The amount of parental milk investment determines not only the number of young the parent can produce, but also affects the offspring's fitness. The antagonism between quantity and quality of offspring was investigated in laboratory mice.In nursing first litters containing 2,4, ..., 14 pups, mothers invested increasing amounts of milk. This mainly extended the intervals between their first and second litters and slightly increased the size of their second litters, whilst third litters were not affected. In the female young, the decreasing amount each individual received as a result of increasing litter size led to delayed birth and reduced the size of their first litters. The intervals between their first and second litters and the size of the second litters were also affected, although to a lesser extent.Taking these results into consideration on a standard lifetime pattern of reproduction, the effects were calculated on net reproductive rates as an expression of fitness. Death rates were assumed that referred to population equilibrium or population growth. In both situations, the fitness curves of mothers and young showed that the actual level of milk investment and the level yielding optimal reproduction were in agreement. There was no significant deviation towards increased investment, as might result from parent-offspring conflict.     

Fibre crops as alternative land use for radioactively contaminated arable land

The transfer of radiocaesium, one of the most important and widespread contaminants following a nuclear accident, to the fibre crops hemp (Cannabis sativa L.) and flax (Linum usitatissimum L.) as well as the distribution of radiocaesium during crop conversion were studied for sandy soil under greenhouse and lysimeters conditions. Soil parameters did not unequivoqually explain the transfer factors (TF) observed. TFs to flax stems ranged from 1.34 to 2.80x10(-3) m2 kg(-1). TFs to seeds are about a factor of 4 lower. During the retting process for separating the fibres from the straw, more than 95% of the activity was removed with the retting water. For hemp, the TF to the stem was about 0.6x10(-3) m2 kg(-1). For hemp, straw and fibres were mechanically separated and TF to straw was about 0.5x10(-3) m2 kg(-1) and to fibres 1.0x10(-3) m2 kg(-1). Generally, the TFs to the useable plant parts both for hemp and flax, are low enough to allow for the production of clean end-products (fibre, seed oil, biofuel) even on heavily contaminated land. Given the considerable decontamination during retting, contamination levels in flax fibres would only exceed the exemption limits for fibre use after production in extreme contamination scenarios (>12,300kBq m(-2)). Since hemp fibres are mechanically separated, use of hemp fibres is more restricted (contamination <740kBq m(-2)). Use of stems as biofuel is restricted to areas with contamination levels of <250 and 1050kBq m(-2) for flax and hemp, respectively. Use of seeds for edible oil production and flour is possible almost without restriction for flax but due to the high TFs to seed observed for hemp (up to 3x10(-3) m2 kg(-1)) consumption of hemp seed products should be considered with care.     

Carbonation of MSWI-bottom ash to decrease heavy metal leaching, in view of recycling

The 0.1-2 mm fraction of a MSWI-bottom ash cannot be used as granular construction material because leaching of Cu exceeds Flemish limit values. In addition, leaching of Ba, Mo and Sb exceeds informal limit values. Leaching characteristics thus need to be improved. Carbonation was the chosen treatment method and this was performed by placing samples in a CO2 chamber. The CO2 percentage and the temperature of the chamber atmosphere, as well as the initial humidity of the samples, were varied to optimize carbonation parameters. Metal leaching was tested with the EN 12457 extraction test. Carbonation decreased Cu leaching from 3.3 to 1.0 mg/kg, but not yet to below the official limit value of 0.5 mg/kg. Leaching of Mo and Sb remained fairly constant or even increased after carbonation, but their limit values are only informal. Ba leaching decreased to below the informal limit value. Carbonation also caused Cr leaching to increase, in some cases to above the official limit value. Of the tested parameters, a CO2 percentage of 10% and a carbonation temperature of 50 degrees C in the atmosphere, together with ash humidity between 13% and 25% appeared to give the best leaching results. The main carbonation reactions took place within the first 24 h.     

Clonal variation in heavy metal accumulation and biomass production in a poplar coppice culture. II. Vertical distribution and phytoextraction potential

Short rotation coppice cultures (SRC) are intensively managed, high-density plantations of multi-shoot trees. In April 1996, an SRC field trial with 17 different poplar clones was established in Boom (Belgium) on a former waste disposal site. In December 1996 and January 2001, all shoots were cut back to a height of 5 cm to create a coppice culture. For six clones, wood and bark were sampled at the bottom, middle and top of a shoot in August and November 2002. No significant height effect of metal concentration was found, but for wood, metal concentrations generally increased toward the top of the shoot in August, and decreased toward the top of the shoot in November. Phytoextraction potential of a clone was primarily determined by metal concentration and by biomass production. Shoot size and number of shoots per stool were less important, as a high biomass production could be achieved by producing a few large shoots or many smaller shoots. Clone Fritzi Pauley accumulated 1.4 kg ha(-1) of Al over two years; Wolterson and Balsam Spire showed a relatively high accumulation of Cd and Zn, i.e. averaging, respectively 47 and 57 g ha(-1) for Cd and 2.4 and 2.0 kg ha(-1) for Zn over two years.     

Metal accumulation in intertidal litter through decomposing leaf blades, sheaths and stems of Phragmites australis

Metal contents of decomposing leaf blades, leaf sheaths and stems of common reed (Phragmites australis) were monitored by a litter bag method on the sediment of an intertidal brackish marsh in the Scheldt estuary (The Netherlands). On monthly intervals, two litter bags were retrieved from the marsh during 9 months for both leaf blades and sheaths and during 16 months for stems. All samples were dried, weighed and analysed for ash and Cd, Cu, Cr, Ni, Pb and Zn contents. Most concentrations increased considerably during the decomposition. Generally, also a very important net metal inflow into the litter bags could be observed. The inflow was highest for leaf blades. High correlations between ash contents and metal concentrations for leaf blades suggest that the increase of leaf blade metal contents can be due to physicochemical sorption of dissolved metals and an important infiltration of mud particles, which were not removed by rinsing the leaf blades with distilled water preceding the analyses. For stems, smaller amounts of inflowing ash and even outflowing ash amounts were found, which suggests that inflow of inorganic particles is not the major factor determining metal accumulation by stems on medium term. Ergosterol concentrations in stem tissue however proved to be correlated with metal contents, which suggests a significant role of fungal litter colonizers in metal accumulation. For leaf sheaths, the effects of physicochemical sorption, infiltration of mud particles and incorporation by microbial litter colonizers do not seem to be as pronounced as for stems and leaf blades.