Utilization of red mud as catalyst in conversion of waste oil and waste plastics to fuel

The aim of this study was to investigate the possibilities of using a by-product (red mud) from alumina production as a catalyst for recovery of waste. The conversion of waste mineral oil (WMO) and waste mineral oil/municipal waste plastic (WMO/MWP) blends over red mud (RM), a commercial hydrocracking catalyst (silica–alumina), and a commercial hydrotreating catalyst (Ni–Mo/alumina) to fuel has been studied. The effect of the catalyst and the temperature on the product distribution (gas, liquid, and wax) and the properties of liquid products were investigated. In the case of hydrotreatment of WMO, the liquids obtained over RM at both 400° and 425°C had larger amounts of low-boiling hydrocarbons than that of thermal or catalytic treatment with hydrotreating catalyst. Gas chromatography and nuclear magnetic resonance analysis of the liquid products showed that RM had hydrogenation and cracking activity in hydrotreatment of WMO. In coprocessing of WMO with municipal waste plastics, temperature had an important effect as well as the amount of MWP in the blend and the catalyst type. The hydrocracking at 400°C produced no liquid product. In hydrocracking at 425°C, the product distribution varied with catalyst type and MWP amount. The commercial hydrocracking catalyst had more cracking ability in the conversion of WMO/MWP to liquid and gas fuel than RM. In the case of hydrocracking over RM, the largest amount of liquid having satisfactory quality was obtained only from the blend containing 20% MWP.     

Development of a database of landfills and dump sites in Asian countries

This article briefly summarizes the limited landfill/dump information available for developing Asian countries, and introduces a database that aims to close the information gap through collecting and sharing data. Developing nations usually try to adapt the systems and technologies of developed countries. However, this approach may not be appropriate because of differences in socioeconomic, cultural, and political backgrounds. Many waste management projects fail after operations are transferred to local authorities owing to a lack of funds to cover the high operational expenses. Some successful projects have been adapted to local conditions, although the information on these successes is not often available for others. Nevertheless, only a few developing countries even have a national inventory of their dumps/landfills, and decision-makers have little awareness of the dumps and their impacts. The database introduced here will gather landfill/dump information from each country and organize it in a comparable format, and it will then be published on the Internet.     

Material cycles in Asia: especially the recycling loop between Japan and China

In this article, we clarify the current status of Japanese exports and Chinese imports of secondary resources. A total of around 10 million metric tons (t) of secondary resources are exported annually from Japan to China, Hong Kong, and Korea. Hong Kong plays the role of a transshipment point, especially regarding the trade in plastic waste, and China imports much from the USA and Japan, often through Hong Kong. The secondary resources exported from Japan include both byproducts from manufacturing processes and end-of-life products or materials. The great demand in China, and the difference in prices between countries, drive this transboundary shipment, although Japan has enacted various recycling laws that were implicitly intended to promote domestic recycling. In China, the imported secondary resources are recycled, usually by means of primitive and low-cost hand labor. The greatest concern is whether there are still improper (illegal or polluting) recycling activities in China. International material cycles should prevent environmental pollution and ensure efficient resource utilization. To that end, the following measures are needed: cooperative control of the trade of secondary resources between countries, the alignment of domestic laws with the regulations in other countries based on the actual trade activities, and the realization of sound practices for global resources management.     

Recovery of gold by chicken egg shell membrane-conjugated chitosan beads

We have successfully prepared a bead-type adsorbent from two materials with different adsorption characteristics. Heavy metals were removed by greatly swollen egg shell membrane-conjugated chitosan beads. The egg shell membrane accumulated and removed precious metal ions from a dilute aqueous solution with a high affinity in a short contact time. Experiments suggested that chitosan beads could take up gold ions with great capacity and selectivity by conjugation with egg shell membrane. Under certain conditions, the selective removal of gold and copper in a mixture of gold and copper ions by egg shell membrane-conjugated chitosan beads was 100% and 2%, respectively. Egg shell membrane-conjugated chitosan beads can be seen as a promising material to recover gold in wastewater from various industries, such as electroplating.     

Influences of Magnesium <Emphasis Type="Italic">tri-</Emphasis>Silicate on the Physical,Mechanical, and Degradable Properties of Ultraviolet (UV) Radiation Cured Plain Board Surface

A series of formulations were prepared with different percentages of oligomer, epoxy diacrylate (EA-1020 ), monomer, 1,6 Hexane diol diacrylate,(HDDA) and different percentages of filler (Magnesium tri-silicate, Mg₂Si₃O₈). Irgacure 369 [2-Benzyl-2-dimethyl-amine-1 (4-morpholinophenyl) butanone-1] was used in the formulations as photoinitiator. Ultraviolet (UV) cured thin polymer films were prepared from these formulating solutions on clean glass plates. Pendulum hardness (PH), gel content and macro scratch hardness (MSH) of the UV cured films were studied. One percent Mg₂Si₃O₈ containing formulation showed the premium properties. The substrates (plain board) were coated by these formulating solutions and cured under the same UV lamp at different intensities of radiation. Various properties of the coated surface such as PH, gloss, adhesion, abrasion and MSH were investigated. The base coat containing 1% Mg₂Si₃O₈ and top coat containing 48% HDDA produced the best performance among all the formulations inspected. The degradable properties in different weathering conditions on PH, gloss, adhesion, abrasion and MSH were measured. The surface cured with the optimized formulation (E) again yielded the minimum loss of the properties.     

Spatial variation of otolith elemental signatures among juvenile gray snapper (<Emphasis Type="Italic">Lutjanus griseus</Emphasis>) inhabiting southern Florida waters

Juvenile gray snapper, Lutjanus griseus, are believed to use bays and estuaries in southern Florida as nurseries before moving out to the adjoining reef tract as adults. Using high-resolution sector field-inductively coupled plasma-mass spectrometry (SF-ICP-MS), the elemental chemistry of the otoliths of juveniles from five nursery regions was resolved by establishing elemental “signatures” for each region. In this study we simultaneously analyzed 32 elements including a suite of rare earth elements. A stepwise variable selection procedure retained a subset of eight elements that contributed substantially to separating otolith samples, including two rare earth elements; this is one of the first studies in which rare earth elements in otoliths have contributed to separation of fish stocks. The classification success rate in assigning fishes to the correct region of origin was 82%. Resolution of sites less than 10 km apart suggested high site fidelity in juvenile gray snapper and little mixing of water masses between sites. The juvenile nursery signatures will be used to determine the relative contribution of different nurseries to the adult population on an adjoining reef tract.     

Lettuce plants as bioaccumulators of trace elements in a community of central Italy

A survey, based on the use of vascular plants to describe the distribution of selected elements (21 in total) was performed in 11 sites in the area of Castelfiorentino (Tuscany, Central Italy) differing for land use, from urban to industrial and rural areas. Lettuce plants grown under standardized conditions were positively used as biodeposimeters of airborne trace elements. Washing was found to be highly significant in reducing concentrations of many elements in the samples, suggesting a general surface contamination of leaves. The typical crustal element Al showed good correlations with Co, Fe, Li and V; on the contrary, Zn and Cd were intercorrelated and showed no connection with crustal indicators. Lead was still a relevant environmental presence, as the experiments were carried out before the ban of leaded gasoline. Source apportionment by factor analysis put in evidence a major contribution of crustal materials, followed by man-related activities; a minor role was ascertained for marine aerosol. A comparison was made between analytical data of lettuce plants grown in our experimental sites and a bulk of commercial lettuce purchased at a local supermarket. It should be stressed how Cu concentrations of commercial material were significantly higher than those found in our plants; this is likely caused by phytosanitary treatments.     

Working backwards to move forwards: Graph-based connectivity metrics for reserve network selection

In this paper we apply graph theory in a reserve selection exercise to explore the tradeoffs between maintaining connectivity and minimizing the total area of a protected area network. Rather than focus on a single organism, we used a multi-species approach and looked at the tradeoff curves for organisms with varying dispersal abilities. We first generated the tradeoff curves using a graph-based metric to determine the importance of individual patches for maintaining connectivity. We then performed an analogous set of analyses using patch size as a surrogate measure of importance.     

Lethal critical body residues as measures of Cd,Pb, and Zn bioavailability and toxicity in the earthworm<Emphasis Type="Italic">Eisenia fetida</Emphasis>

Background

Earthworm heavy metal concentrations (critical body residues, CBRs) may be the most relevant measures of heavy metal bioavailability in soils and may be linkable to toxic effects in order to better assess soil ecotoxicity. However, as earthworms possess physiological mechanisms to secrete and/or sequester absorbed metals as toxicologically inactive forms, total earthworm metal concentrations may not relate well with toxicity.

Objective

The objectives of this research were to: i) develop LD₅₀s (total earthworm metal concentration associated with 50% mortality) for Cd, Pb, and Zn; ii) evaluate the LD₅₀ for Zn in a lethal Zn-smelter soil; iii) evaluate the lethal mixture toxicity of Cd, Pb, and Zn using earthworm metal concentrations and the toxic unit (TU) approach; and iv) evaluate total and fractionated earthworm concentrations as indicators of sublethal exposure.

Methods

Earthworms (Eisenia fetida (Savigny)) were exposed to artificial soils spiked with Cd, Pb, Zn, and a Cd?Pb?Zn equitoxic mixture to estimate lethal CBRs and mixture toxicity. To evaluate the CBR developed for Zn, earthworms were also exposed to Zn-contaminated field soils receiving three different remediation treatments. Earthworm metal concentrations were measured using a procedure devised to isolate toxicologically active metal burdens via separation into cytosolic and pellet fractions.

Results and Discussion

Lethal CBRs inducing 50% mortality (LD₅₀, 95% CI) were calculated to be 5.72 (3.54–7.91), 3.33 (2.97–3.69), and 8.19 (4.78–11.6) mmol/kg for Cd, Pb, and Zn, respectively. Zn concentrations of dead earthworms exposed to a lethal remediated Zn-smelter soil were 3-fold above the LD₅₀ for Zn and comparable to earthworm concentrations in lethal Zn-spiked artificial soils, despite a 14-fold difference in total soil Zn concentration between lethal field and artificial soils. An evaluation of the acute mixture toxicity of Cd, Pb, and Zn in artificial soils using the Toxic Unit (TU) approach revealed an LD₅₀ (95% CI) of 0.99 (0.57–1.41) TU, indicating additive toxicity.

Conclusions

Total Cd, Pb, and Zn concentrations in earthworms were good indicators of lethal metal exposure, and enabled the calculation of LD₅₀s for lethality. The Zn-LD₅₀ developed in artificial soil was applicable to earthworms exposed to remediated Zn-smelter soil, despite a 14-fold difference in total soil Zn concentrations. Mixture toxicity evaluated using LD₅₀s from each single metal test indicated additive mixture toxicity among Cd, Pb, and Zn. Fractionation of earthworm tissues into cytosolic and pellet digesis yielded mixed results for detecting differences in exposure at the sublethal level.

Recommendation and Outlook

CBRs are useful in describing acute Cd, Pb, and Zn toxicity in earthworms, but linking sublethal exposure to total and/or fractionated residues may be more difficult. More research on detoxification, regulation, and tissue and subcellular partitioning of heavy metals in earthworms and other invertebrates is needed to establish the link between body residue and sublethal exposure and toxicity.

     

Synthesis of Molecular Imprinting Polymers Separating Toluic Acid Isomers (II)

Polymers that can separate toluic acid isomers were synthesized by molecular imprinting technique. Molecular imprinting polymers (MIPs) for each isomer of toluic acids (TA) were synthesized using styrene and 4-vinylpyridine (4-Vpy). The adsorption characteristics of TA isomers, salicylic acid (SA), and benzoic acid (BA) on each MIP were investigated. The materials used for polymerization of TA isomers MIPs were adsorbed relatively well. This verifies that the MIPs which can adsorb template selectively were synthesized. In addition, the quantities of adsorbed TA isomers on the TA isomers MIPs and on the control polymer polymerized without template were compared and discussed. The variation of adsorption ability for MIPs with repeated use was investigated, showing excellent reproducibility.