New aspect in seagrass acclimation: leaf mechanical properties vary spatially and seasonally in the temperate species Cymodocea nodosa Ucria (Ascherson)

Seagrasses may acclimate to environmental heterogeneity through phenotypic plasticity. In contrast to leaf morphology, which has been a central point in seagrass acclimation studies, plasticity in leaf biomechanics and fibre content is poorly understood, despite being crucial in plant ecological performance, especially regarding physical forces. We hypothesised that mechanical traits (e.g. breaking force, strength, toughness, and stiffness) and fibre content of seagrass leaves vary as morphology does under differential environments. Cymodocea nodosa was seasonally monitored at three locations around Cádiz Bay (southern Spain) with hydrodynamic regime as the most noticeable difference between them. Leaves showed plasticity in both morphology and mechanical traits, with wave-exposed individuals presenting short but extensible and tough leaves. Leaf fibre content was invariant along the year and with little spatial variability. Cross-sectional area rather than material properties or fibre content differentiates leaf mechanical resistance. Seagrass capacity to thrive under a range of mechanical forces may be dictated by their plasticity in morpho-biomechanical traits, a key element for the hydrodynamical performance and, hence, for species colonisation and distribution.     

Effect of surfactants on Fenton's reagent-mediated degradation of Kraft black liquor

One of the limitations of the biodegradation of hydrophobic chemical compounds, like lignins, is their low solubility in the aqueous solution where this process takes place. To resolve this problem, surfactants have been used to improve the solubility of these hydrophobic compounds. In this investigation, we studied the effect of surfactants (anionic, cationic, and non-ionic) on the treatment of Kraft black liquor with Fenton's reagent. In the Fenton reaction, H2O2 (two different concentrations, 10 mM and 20 mM), FeCl2 (1 mM) and surfactant solution (10%) were used. Black liquor degradation was determined by UV/Visible spectrophotometry and by measuring phenolic groups. In the presence of Fenton's reagent, the optimum conditions for the oxidative degradation of black liquor were 10 mM H2O2, 1 microL of 10% solution of anionic surfactant (SDS). The importance of the use of surfactants for preparing black liquor for subsequent Fenton's reagent-mediated degradation was discussed.     

Mitochondrial gene variation in Mercenaria clam sibling species reveals a relict secondary contact zone in the western Gulf of Mexico

We investigated phylogeographic relationships among American Mercenaria taxa by assessing variation in a 444 nucleotide fragment of the mitochondrial 16S ribosomal gene in clams sampled from four representative sites in January to November 1994. Three of these sites were in the Gulf of Mexico, one was on the Atlantic coast in South Carolina. Direct sequencing of this amplified gene fragment in 85 individuals revealed 21 haplotypes. Phylogenetic analyses consistently resolved this variation into three well supported clades, and within-clade genetic divergence levels were markedly lower than among-clade values. One of the clades, A, was taxon-specific, in that it solely and exclusively contained specimens of M. mercenaria (Linnaeus, 1758) sampled in South Carolina. The other two clades, B and C, were the most divergent and both encompassed specimens of M. campechiensis (Gmelin, 1791) and of M. campechiensis texana (Dall, 1902), sampled from the three Gulf of Mexico sites. Clade B was found at high frequencies at all three Gulf sites, whereas Clade C occurred at low frequencies at two western Gulf sites. We interpret this pattern as resulting from the secondary contact and introgression of two allopatrically differentiated Mercenaria taxa in the western Gulf of Mexico. Clade C haplotypes may represent relict mitochondrial lineages from original Gulf Mercenaria spp. populations that predate massive mitochondrial introgression by M. campechiensis. We further propose that the M. campechiensis texana nuclear genome is a mosaic, heavily weighted toward M. campechiensis, but containing some relict alleles inherited from the precontact population, especially those governing shell characteristics, which may be adaptive in cohesive sediments of bays and estuaries in the northwestern Gulf of Mexico.     

Determination of selected fate and aquatic toxicity characteristics of acrylic acid and a series of acrylic esters

Acrylic acid, methyl acrylate, ethyl acrylate, and butyl acrylate are commercially important and widely used materials. This paper reports the results of a series of fate and aquatic toxicity studies. The mobility in soil of acrylic acid and its esters ranged from 'medium' to 'very high'. Calculated bioconcentration factors ranged from 1 to 37, suggesting a low bioconcentration potential. Acrylic acid and methyl acrylate showed limited biodegradability in the five day biochemical oxygen demand (BOD5) test, while ethyl acrylate and butyl acrylate were degraded easily (77% and 56%, respectively). Using the OECD method 301D 28-d closed bottle test, degradability for acrylic acid was 81% at 28 days, while the acrylic esters ranged from 57% to 60%. Acrylic acid degraded rapidly to carbon dioxide in soil (t1/2 < 1 day). Toxicity tests were conducted using freshwater and marine fish, invertebrates, and algae. Acrylic acid effect concentrations for fish and invertebrates ranged from 27 to 236 mg/l. Effect concentrations (LC50 or EC50) for fish and invertebrates using methyl acrylate, ethyl acrylate, and butyl acrylate ranged from 1.1 to 8.2 mg/l. The chronic MATC for acrylic acid with Daphnia magna was 27 mg/l based on length and young produced per adult reproduction day and for ethyl acrylate was 0.29 mg/l based on both the reproductive and growth endpoints. Overall these studies show that acrylic acid and the acrylic esters studied can rapidly biodegrade, have a low potential for persistence or bioaccumulation in the environment, and have low to moderate toxicity.     

Persistent organochlorine compounds in soils and sediments of European high altitude mountain lakes

The composition of persistent organochlorine compounds (OC) in soils and sediments from two high altitude European mountain lakes, Redon in the Pyrenees and Ladove in the Tatra mountains, has been studied. Sediment cores from two additional lakes in the Tatra mountains, Starolesnianske Pleso and Dlugi Staw, have also been examined. DDTs (1.7-13 ng g(-1)) were the most abundant OC in soils followed by total polychlorobiphenyls (PCBs; 0.41-1.5 ng g(-1)) and hexachlorobenzene (HCB; 0.15-0.91 ng g(-1)). In sediments, the dominant OC were also DDTs (3.3-28 ng g(-1)) and PCBs (2.3-15 ng g(-1)). These concentrations are low, involving absence of major pollution sources in these high mountain regions. The downcore OC profiles in soils and sediments were similar but higher concentrations and steeper vertical gradients were observed in the latter. Radiometric determinations showed absence of significant OC transport from catchment to lake. The sediment-soil difference points therefore to a better retention of the OC load in sediments than soils which may be related to the low temperatures that are currently encountered at the bottom of the lake water column and the depletion of sediment bioturbation in these cold environments. Significant qualitative changes in the soil PCB distributions are observed downcore. These involve a dominance of the high molecular weight congeners in the top core sections and those of lower weight (i.e. less chlorinated) in the bottom. Anaerobic dechlorination of higher molecular weight congeners occurring in microsites, e.g. as observed in flooded or poorly drained soils, could be responsible for these changes. This process could be concurrent to bioturbation.     

The solid-phase controls on the mobility of heavy metals at the Copper Cliff tailings area, Sudbury, Ontario, Canada

The Copper Cliff Tailings Disposal Area, located near Sudbury, Ontario, covers an area of approximately 2200 ha and constitutes more than 10% of the total area of all mine tailings in Canada. The area has been utilized since 1936, receiving sulphide-containing tailings from the Inco Sudbury operations. Field measurements of pore-gas oxygen and carbon dioxide in the vadose zone indicate that sulphide oxidation has progressed to depths of 1.6 m to 1.7 m within the tailings. The oxidation of sulphide minerals within the vadose zone, and the accompanying dissolution of carbonate and aluminosilicate minerals within these tailings releases SO₄, Fe(II) and other metals to the pore water. In the vadose and saturated zones, concentrations of Fe and Ni exceed 10100 mg/l and 2210 mg/l, respectively. These high concentrations of dissolved metals are attenuated by a series of precipitation, coprecipitation and adsorption reactions. The precipitation of secondary sulphate and hydroxide phases also create hardpan layers at or near the oxidation front. Geochemical modelling of the pore-water chemistry suggests that pH-buffering reactions are occurring within the shallow oxidized zones, and that secondary-phase precipitation is occurring at or near the underlying hardpan and transition zones. Mineralogical study of the tailings confirmed the presence of jarosite, gypsum and goethite within the shallow tailings, suggesting that these phases are controlling the dissolved concentrations of Fe, SO₄ and Ca. Extraction experiments conducted on the tailings solids indicate that the constituents contained in the water-soluble fraction of the shallow, weathered tailings are derived from the original pore water and the dissolution of highly soluble phases such as gypsum. The acid-leachable fraction of the weathered tailings accounts for up to 25% of the heavy metals, and the reducible fraction may contain up to 100% of the heavy metals within the shallow, weathered tailings. Based on the pore water profiles and the geochemistry of the tailings solids, a relative mobility scale of Fe=Mn=Ni=Co>Cd Zn>Cr=Pb>Cu can be determined.     

Occurrence and treatment trials of endocrine disrupting chemicals (EDCs) in wastewaters

This study demonstrates that both synthetic and natural endocrine disrupting chemicals (EDCs) (e.g., bisphenol A, estrone and 17beta-estradiol) were found in the crude wastewaters from two wastewater treatment works (WwTWs). Conventional biological processes can lower EDCs concentrations to several tens to hundreds ngl(-1). Since natural EDCs (e.g., estrone and 17beta-estradiol) have biological activity and adverse impact on the environment at extremely low concentrations (several tens of ngl(-1)), further treatment after conventional biological processes is required. Preliminary trials with ferrate(VI) and electrochemical oxidation process demonstrated that both processes can effectively reduce EDCs to very low levels, ranging between 10 and 100ngl(-1), but the former is more effective than the latter to reduce COD concentration in wastewater for given studying conditions.