Biosensor-based diagnostics of contaminated groundwater: assessment and remediation strategy

Shallow groundwater beneath a former airfield site in southern England has been heavily contaminated with a wide range of chlorinated solvents. The feasibility of using bacterial biosensors to complement chemical analysis and enable cost-effective, and focussed sampling has been assessed as part of a site evaluation programme. Five different biosensors, three metabolic (Vibrio fischeri, Pseudomonas fluorescens 10568 and Escherichia coli HB101) and two catabolic (Pseudomonas putida TVA8 and E. coli DH5alpha), were employed to identify areas where the availability and toxicity of pollutants is of most immediate environmental concern. The biosensors used showed different sensitivities to each other and to the groundwater samples tested. There was generally a good agreement with chemical analyses. The potential efficacy of remediation strategies was explored by coupling sample manipulation to biosensor tests. Manipulation involved sparging and charcoal treatment procedures to simulate remediative engineering solutions. Sparging was sufficient at most locations.     

The impact of additives found in industrial formulations of TCE on the wettability of sandstone

The wettability of aquifer rocks is a key physical parameter which exerts an important control on the transport, residual trapping, distribution and eventual fate of chlorinated hydrocarbon solvents (CHSs) released into the subsurface. Typically chlorinated solvents are assumed to be non-wetting in water saturated rocks and unconsolidated sediments. However industrially formulated solvent products are often combined with basic additives such as alkylamines to improve their performance; and the mineral surfaces of aquifer rocks and sediments usually possess a range of acid and hydrogen-bonding adsorption sites. The presence of these sites provides a mechanism whereby the basic additives in CHSs can be adsorbed at the solvent phase/solid phase interface. Given the amphiphilic molecular structure of these additives, this may result in changes in the wetting conditions of the solid phase. The aim of this study was therefore to test this conjecture for two classes of additives (alkylamines and quaternary ammonium salts) that are often encountered in industrial solvent formulations. Wettability assessments were made on sandstone cores by means of measurements of spontaneous and forced water drainage and spontaneous and forced water imbibition and through contact angle measurements on a smooth quartz surface. No solvent/additive combination produced solvent wetting conditions, though dodecylamine and octadecylamine significantly reduced the water wetting preference of sandstone which frequently resulted in neutral wetting conditions. The large volume of spontaneous water drainage observed in wettability experiments involving cetyltrimethylammonium bromide and octadecyltrimethylammonium bromide, suggested that the sandstone cores in these tests remained strongly water wetting. However equilibrium static contact angles of around 60 degrees were measured on quartz suggesting that the sandstone surfaces should be close to neutral wetting conditions. This paradox was finally resolved by noting that contact between the solvent mixture and water in the sandstone core resulted in a final solvent phase which had an extremely low interfacial tension. It is therefore suspected that the observed spontaneous drainage of solvent from the core was driven by gravitational and buoyancy forces rather than strong water wetting conditions. Finally it was noted that the mobilisation of iron oxide coatings from the sandstone surface had a considerable influence in reducing the interfacial tension and in the formation and stabilisation of TCE/water emulsions.     

Managing troubled data: coastal data partnerships smooth data integration

Understanding the ecology, condition, and changes of coastal areas requires data from many sources. Broad-scale and long-term ecological questions, such as global climate change, biodiversity, and cumulative impacts of human activities, must be addressed with databases that integrate data from several different research and monitoring programs. Various barriers, including widely differing data formats, codes, directories, systems, and metadata used by individual programs, make such integration troublesome. Coastal data partnerships, by helping overcome technical, social, and organizational barriers, can lead to a better understanding of environmental issues, and may enable better management decisions. Characteristics of successful data partnerships include a common need for shared data, strong collaborative leadership, committed partners willing to invest in the partnership, and clear agreements on data standards and data policy. Emerging data and metadata standards that become widely accepted are crucial. New information technology is making it easier to exchange and integrate data. Data partnerships allow us to create broader databases than would be possible for any one organization to create by itself.     

Southern California's marine monitoring system ten years after the National Research Council evaluation

In 1990, the National Research Council (NRC) published two in-depth assessments of marine environmental monitoring effectiveness. The first of these, Managing Troubled Waters: The Role of Marine Environmental Monitoring, provided a national perspective and the second, Monitoring Southern California's Coastal Waters, examined the specifics of monitoring design and implementation in a densely populated, highly urbanized coastal region. The reports include explicit recommendations about the need for greater regionalization of monitoring efforts, supported by greater standardization of field, laboratory, and data analysis methods. They also identified the need for centralized data management and for greater flexibility in the language of standard discharge permits, flexibility that would permit discharge agencies to more readily participate in regional monitoring and research programs. Other recommendations identified a need for EPA and NOAA to focus on creating a national monitoring program structured as a network of coordinated local and regional efforts. Finally, the NRC emphasized the need for better reporting and for periodic review of monitoring's relevance to management concerns. In this paper, we use southern California as a test case to assess progress made in implementing the NRC's recommendations. We review progress made on each recommendation and discuss the features of the regulatory and management climate that contributed to or impeded this progress. We also consider whether, and to what extent, the NRC's recommendations remain relevant in the present context.     

Making performance-based chemistry work: how we created comparable data among laboratories as part of a Southern California marine regional assessment

Quality assurance procedures to ensure consistency among chemistry laboratories typically involves the use of standard methods and state certification programs that require laboratories to demonstrate their ability to attain generic performance criteria. To assess whether these procedures are effective for ensuring comparability when processing local samples with potentially complex matrices, seven experienced, state-certified laboratories participated in an intercalibration exercise. Each laboratory was permitted to use their typical methodology for quantifying PAH, PCB and DDT on shared samples collected from Santa Monica Bay and the Palos Verdes Shelf, two sites with a complex mix of constituents. In the initial intercalibration exercise, results from these laboratories differed by as much as an order of magnitude for all three chemical groups. Much, but not all, of the difference was attributable to differences in detection capability. A series of studies was conducted to identify the reasons for the observed differences, which varied among laboratories and included methodological differences, instrument sensitivity differences, and differing interpretations of chromatograms. Following these investigations and resulting modifications to laboratory procedures, the exercise was repeated. The average coefficient of variation among laboratories across all chemical parameters was reduced to less than 30%. Our results suggest that performance-based chemistry can produce comparable results, but the certification processes presently in place that focus on general laboratory procedures and simple matrices are insufficient to achieve comparability.     

Decision Analysis Methodology to Evaluate Integrated Solid Waste Management Alternatives

Value-focused thinking, a decision analysis technique, is used to produce a multiple-objective model that captures a site's municipal solid waste (MSW) management goals, objectives, and concerns in order to facilitate the evaluation of competing strategies. The model ranks competing MSW alternatives based on how well they meet the decision maker's strategic objective, a 20-year compliant MSW system. Sensitivity analysis is incorporated in the model to assess and illustrate the effects of changes in model objective weights and changes in model parameters. Overall, the model provides decision-makers with a decision tool to make a better decision when choosing a new MSW management strategy. The entire process is applied to a case study using Earekson Air Station, a remote U.S. Air Force installation.     

Characterisation of trace elements and methylmercury in an estuarine sediment reference material, IAEA-405

An estuarine sediment sample, IAEA-405, was recently characterised for trace elements and methylmercury (MeHg) for ultimate use as a marine reference material. The reference values were calculated using data sets from 120 laboratories that participated in a world-wide intercomparison exercise. The data evaluation is highlighted, and includes comparisons of different analytical methods, as well as the distribution of data. Overall laboratory performance for this exercise was encouraging: 86 laboratories (72%) reported data with <25% outliers. There was sufficient acceptable data to establish recommended values for 17 elements and information values for a further 15 elements. In addition, a recommended value was established for methylmercury. The estuarine sediment sample, IAEA-405, can be used as a reference material for quality control in the determination of trace elements and methylmercury in moderately polluted sediments.     

The Steubenville comprehensive air monitoring program (SCAMP): associations among fine particulate matter, co-pollutants, and meteorological conditions

We determined 24-hr average ambient concentrations of PM2.5 and its ionic and carbonaceous components in Steubenville, OH, between May 2000 and May 2002. We also determined daily average gaseous co-pollutant concentrations, meteorological conditions, and pollen and mold spore counts. Data were analyzed graphically and by linear regression and time series models. Multiple-day episodes of elevated fine particulate matter (PM2.5) concentrations often occurred during periods of locally high temperature (especially during summer), high pressure, or low wind speed (especially during winter) and generally ended with the passage of a frontal system. After removing autocorrelation, we observed statistically significant positive associations between concentrations of PM2.5 and concentrations of CO, NOx, and SO2. Associations with NOx and CO exhibited significant seasonal dependencies, with the strongest correlations during fall and winter. NOx, CO, SO2, O3, temperature, relative humidity, and wind speed were all significant predictors of PM2.5 concentration in a time-series model with external regressors, which successfully accounted for 79% of the variance in log-transformed daily PM2.5 concentrations. Coefficient estimates for NOx and temperature varied significantly by season. The results provide insight that may be useful in the development of future PM2.5 reduction strategies for Steubenville. Additionally, they demonstrate the need for PM epidemiology studies in Steubenville (and elsewhere) to carefully consider the potential confounding effects of gaseous co-pollutants, such as CO and NOx, and their seasonally dependent associations with PM2.5.     

Fossil fuels in the 21st century

An overview of the importance of fossil fuels in supplying the energy requirements of the 21st century, their future supply, and the impact of their use on global climate is presented. Current and potential alternative energy sources are considered. It is concluded that even with substantial increases in energy derived from other sources, fossil fuels will remain a major energy source for much of the 21st century and the sequestration of CO2 will be an increasingly important requirement.     

Polychlorinated biphenyl (PCB) congeners and chlorinated pesticides in a cod liver oil reference material

A cod liver oil reference material, Standard Reference Material (SRM) 1588, which was issued by the National Institute of Standards and Technology (NIST) in 1989, has certified concentrations for five polychlorinated biphenyl (PCB) congeners and ten chlorinated pesticides. Recently, this SRM has been extensively characterized by additional analyses at NIST and by analyses at the Canadian Wildlife Service (CWS) where the SRM was used as a control sample during routine analyses of wildlife tissue specimens. In this paper the results from NIST and CWS are compared and the concentrations for over 40 PCB congeners and 20 chlorinated hydrocarbons are reported.