Mineral consumption in the UK, 1945–1980: A statistical analysis

Trends in the UK consumption of 12 metallic and 19 non-metallic minerals are examined for the period 1945–1980. Comparisons are drawn between these trends and developments in per capita GDP, total world consumption and UK mineral processing capacity. Although the consumption of most minerals has shown a tendency to stagnate or decline in recent years, taking the post-war period as a whole the consumption of non-metallics has displayed a faster and more sustained growth than that of metallics; thus their share of the total value of minerals consumed in the UK has increased significantly.     

Superoxide production by marine microalgae

This study investigated the possible roles of superoxide produced by raphidophyte and prymnesiophyte microalgae as an ichthyotoxic agent to damselfish and an allelopathic agent to bacteria. We found that the rate of superoxide production varied with algal cell density, with cell densities of the raphidophyte Chattonella marina >10,000 cells ml^–1 producing less environmental levels of superoxide per cell (94±14 chemiluminescence units) than cell densities <10,000 cells=">^–1 (390±54 units per cell). Microalgal cells have the capacity to change their superoxide production rate over a period of 1 h, dependent on cell density and metabolic activity. We also examined the effect of superoxide on suppression of bioluminescence of the marine bacterium Vibrio fischeri as a model for bacterial alleopathy and found that both superoxide and free fatty acids such as eicosapentaenoic acid (EPA; 20:53) present in raphidophyte microalgal cells cause suppression of bacterial bioluminescence. The combination of superoxide in the presence of EPA further enhanced bioluminescence suppression. Superoxide was also found to enhance the toxicity of free fatty acid EPA to damselfish (Acanthochromis polycanthus) at concentrations as low as 0.2 mg l^–1. In conclusion, consideration should be given to density dependent and/or metabolic variations of toxicity when publishing minimum alert levels for superoxide producing ichthyotoxic microalgal species. A secondary role of superoxide production may be to enhance the toxicity of algal exudates or serve as an allelopathic agent against bacterial fouling.     

A predictive mechanism for mercury oxidation on selective catalytic reduction catalysts under coal-derived flue gas

This paper introduces a predictive mechanism for elemental mercury (Hg(o)) oxidation on selective catalytic reduction (SCR) catalysts in coal-fired utility gas cleaning systems, given the ammonia (NH3)/nitric oxide (NO) ratio and concentrations of Hg(o) and HCl at the monolith inlet, the monolith pitch and channel shape, and the SCR temperature and space velocity. A simple premise connects the established mechanism for catalytic NO reduction to the Hg(o) oxidation behavior on SCRs: that hydrochloric acid (HCl) competes for surface sites with NH3 and that Hg(o) contacts these chlorinated sites either from the gas phase or as a weakly adsorbed species. This mechanism explicitly accounts for the inhibition of Hg(o) oxidation by NH3, so that the monolith sustains two chemically distinct regions. In the inlet region, strong NH3 adsorption minimizes the coverage of chlorinated surface sites, so NO reduction inhibits Hg(o) oxidation. But once NH3 has been consumed, the Hg(o) oxidation rate rapidly accelerates, even while the HCl concentration in the gas phase is uniform. Factors that shorten the length of the NO reduction region, such as smaller channel pitches and converting from square to circular channels, and factors that enhance surface chlorination, such as higher inlet HCl concentrations and lower NH3/NO ratios, promote Hg(o) oxidation. This mechanism accurately interprets the reported tendencies for greater extents of Hg(o) oxidation on honeycomb monoliths with smaller channel pitches and hotter temperatures and the tendency for lower extents of Hg(o) oxidation for hotter temperatures on plate monoliths. The mechanism also depicts the inhibition of Hg(o) oxidation by NH3 for NH3/NO ratios from zero to 0.9. Perhaps most important for practical applications, the mechanism reproduces the reported extents of Hg(o) oxidation on a single catalyst for four coals that generated HCl concentrations from 8 to 241 ppm, which covers the entire range encountered in the U.S. utility industry. Similar performance is also demonstrated for full-scale SCRs with diverse coal types and operating conditions.     

The Steubenville Comprehensive Air Monitoring Program (SCAMP): analysis of short-term and episodic variations in PM2.5 concentrations using hourly air monitoring data

One-hour average ambient concentrations of particulate matter (PM) with an aerodynamic diameter < 2.5 microm (PM2.5) were determined in Steubenville, OH, between June 2000 and May 2002 with a tapered element oscillating microbalance (TEOM). Hourly average gaseous copollutant [carbon monoxide (CO), sulfur dioxide (SO2), nitrogen oxide (NOx), and ozone (O3)] concentrations and meteorological conditions also were measured. Although 75% of the 14,682 hourly PM2.5 concentrations measured during this period were < or = 17 microg/m3, concentrations > 65 microg/m3 were observed 76 times. On average, PM2.5 concentrations at Steubenville exhibited a diurnal pattern of higher early morning concentrations and lower afternoon concentrations, similar to the diurnal profiles of CO and NO(x). This pattern was highly variable; however, PM2.5 concentrations > 65 microg/m3 were never observed during the mid-afternoon between 1:00 p.m. and 5:00 p.m. EST. Twenty-two episodes centered on one or more of these elevated concentrations were identified. Five episodes occurred during the months June through August; the maximum PM2.5 concentration during these episodes was 76.6 microg/m3. Episodes occurring during climatologically cooler months often featured higher peak concentrations (five had maximum concentrations between 95.0 and 139.6 microg/m3), and many exhibited strong covariation between PM2.5 and CO, NO(x), or SO2. Case studies suggested that nocturnal surface-based temperature inversions were influential in driving high nighttime concentrations of these species during several cool season episodes, which typically had dramatically lower afternoon concentrations. These findings provide insights that may be useful in the development of PM2.5 reduction strategies for Steubenville, and suggest that studies assessing possible health effects of PM2.5 should carefully consider exposure issues related to the intraday timing of PM2.5 episodes, as well as the potential for toxicological interactions among PM2.5, and primary gaseous pollutants.     

The prediction of safe lifting behavior: an application of the theory of planned behavior

PROBLEM: Injuries resulting from lifting are costly, and create significant pain and discomfort. While engineering controls are the most effective means of reducing risks, most organizations continue to rely on manual lifting techniques. The problem, however, is that the use of safe-lifting techniques is inconsistent and managers have a difficult time motivating use of these techniques. Consequently, it is important to understand the factors driving safe-lifting behaviors. METHODS: This study used a survey to apply the theory of planned behavior (Ajzen., I., 1991. The theory of planned behavior. Organization Behavior and Human Processes, 50, 179-211) to safe-lifting among 136 materials management employees at a heavy manufacturing organization. Structural equation modeling and factor analysis were employed to analyze relationships among constructs. RESULTS: Results revealed that perceived behavioral control and intention were the strongest predictors of safe-lifting behavior. Subjective norms, to a lesser degree, were also important influences on intention. Attitudes did not surface as effective direct predictors of safe-lifting behavior, but did affect behavior and intent via mediating factors (subjective norms and perceived behavioral control). Finally, the theory of planned behavior was supported as an effective model explaining safe-lifting behavior, and had potential application for many other safety-related behaviors. IMPACT ON INDUSTRY: Results from this study emphasize the importance of perceived behavioral control as a factor associated with safety-related behavior.     

Gravity model formulation for an extensive National Parkway Site

The purpose of this study was to collect specific information on the characteristics and intensity of local Blue Ridge Parkway use and to use that information to develop a recreation use model of local Parkway visitation. Data were obtained from a self-administered mail-back questionnaire sent to a random sample of people living in the 29 counties adjacent to the Parkway.We developed two recreation use projection/demand models that employ three variables (distance, alternative recreation sites, and population density) to predict visitation to different Parkway areas from various local origins. The derived model estimates indicated that about one-fourth of all Parkway visits in 1978 were one-day visits made by area residents.